After farting around with new plugs, #3 coil and new fuel injectors I found that one wire from the ECM to the Fuel Injector was bad. DOES ANYONE KNOW WHAT GAUGE WIRE TO USE ???

2oo3 Vibe GT
333,000 miles

Can the Inside of the Headlamp be cleaned - seems that's where most of my distortion is.

Hey Thanks I think I found the problem. As I read the Alternator short the next morning I looked at the Alternator which my son and & I had replaced about a year ago. Well I found a broken bracket on top of the alternator that most likely shorted out the alt 100A fuse. The fuse was not easy to g...

2003 Vibe GT 6-speed. Was driving along when a ZAP on my radio hit I shut the radio off and got another Zap then my radio was off and dash lights, speedometer, gauges,, turn signals, head lights - all off - car was still running. I was headed to get pizza and stopped at the pizza place -- couldn't g...

I have a 2003 Vibe GT . where is the pre-cat O2 sensor? And how hard to install new one? Can the post-cat O2 sensor be bad instead of the Catalyst?

I have replaceing the rear brake pads & rotors on my '03 Vibe GT. The pads have holes that pins pass thru. Do I need to take off the bolts than hold the Calipers together or can you take the pins out without taking those bolts. Note I am not talking about the bolts that secure the caliper to the...

My thermostat has been sticking this week here in Michigan so I need to install new one and Coolant. Anyone experience issues or have preferences with a type of coolant. And is the stock Thermostat ok to use as the replacement. With all the different Coolants just wanted a recommendation. Thanks all

I own a 2003 Vibe with a Navigation Unit. The DVD data is dated from 2001. Anyone know where to get an updated DVD. The owner's manual says check with the dealer. I did any mine told me that the owner's manual isn't always correct.

Thanks Tool Guy. Will get some PB Blaster. If the GM procedure is any differnt pls fax it to (734) 736 5510....Tanks

Anyone know the sequence for removing the front rotors. I noticed a 12pt - 30mm axle nut that I also removed but with no sucess on the rotors. The replacement rotors look like they don't need to be secured with this nut. Here is what I tried. - removed 30mm axle nut using 1 3/16 12pt hex - remove tw...