I'm assuming you have a 1zz engine. It will work but you may need to add a breather filter to hose that comes out of the top front of the engine and fits into the stock air tube before the TB. $10 part at autozone. Look for a pic of my engine it's shows what I'm talking about.
05 Matrix XR 4WD and 03 Vibe GT
"If you want Government to solve your problems, then you are the problem!" BMSR
Trix MODS: SRI w/ AEM filter, Vibrant/Magnaflow Cat-back, Alutec Lightweight Crank Pulley
GT MODS: Cosmo SRI, DRL, Auto Stop
Post a link for the SRI. Also be prepared to replace the filter. As far as a pic do some searches on Genvibe. Also PLEASE remove the negative battery cable first and makeit the last thing you put back on. Could save you $100 and a lot of headaches.
Last edited by Salsa Guy on Fri Aug 02, 2013 7:01 pm, edited 1 time in total.
05 Matrix XR 4WD and 03 Vibe GT
"If you want Government to solve your problems, then you are the problem!" BMSR
Trix MODS: SRI w/ AEM filter, Vibrant/Magnaflow Cat-back, Alutec Lightweight Crank Pulley
GT MODS: Cosmo SRI, DRL, Auto Stop
You realize you won't gain much but some noise. A K&N drop in will gain the same results. I have an ebay SRI but have an AEM Dry Flo with it.
05 Matrix XR 4WD and 03 Vibe GT
"If you want Government to solve your problems, then you are the problem!" BMSR
Trix MODS: SRI w/ AEM filter, Vibrant/Magnaflow Cat-back, Alutec Lightweight Crank Pulley
GT MODS: Cosmo SRI, DRL, Auto Stop
EricTMah wrote:Not a 100% sure about the base matrix/corolla/vibe. But I know the 03-04 XRS won't work on the 05+ XRS cause of the air injection tubes
The 04's had air injection also, 03's are the only XRS without the stupid air injection pump.
The 03-08 1ZZ powered vibe/matrix shouldn't be any different as far as the intake. Nothing major changed other than drive by wire in 05+ models and that has nothing to do with the intake.