I changed my oil the other day and thought I'd take a look at the spark plugs, and realized I wasn't sure how to get to them. I couldn't find any info in the manual.
There's a thread that has some good pics of the spark plug access at http://forums.genvibe.com/zerothread?id=5814, and an ongoing discussion of which plugs are best for a Vibe.It's different than other cars I've had.
both engines you will need to remove the engine cover (black plastic) should be 2 10mm nuts in front and 2 plastic clips in the rear (1ZZ engine) the 2ZZ .....should be 4, then unplug the coil packs, remove the 10mm bolt. and you now have access to the plug.
03 toyota matrix XRS 6 speed, lunar mist,factory 17 inch rims w/firehawks- summer tiresfactory 16 inch rims with dunlops- winter tirestrd sway bars, trd strut brace, trd sport muffler,trd quick shifter,trd cold air intake, toyota tundra dual horns,factory toyota wing from toyota canada, both front door handle modsNEW pioneer AVIC-D1 nav unit, XM radio installed
Just use a small bladed screwdriver to pry up the center then it can gently popped out of the cover1
Abyss Monotone Power Package All exterior lights upgraded to Piaa 60 Series Flowmaster, K&N Typhoon Autometer liquid filled oil pressure guage 5% Tint on all five rear windows Hurst Pistol Grip shifter, Piaa Sports Horns
i lift the cover up in front and sorta roll the cover back...SLOWLY not to break the clips. i have used the screw driver before and break them sometimes.
03 toyota matrix XRS 6 speed, lunar mist,factory 17 inch rims w/firehawks- summer tiresfactory 16 inch rims with dunlops- winter tirestrd sway bars, trd strut brace, trd sport muffler,trd quick shifter,trd cold air intake, toyota tundra dual horns,factory toyota wing from toyota canada, both front door handle modsNEW pioneer AVIC-D1 nav unit, XM radio installed