actually I checked on UPS and they have shipped it the only bad thing is that the arrival date is the 27th!!! Does it really take that long from VA to CA? Well the good thing is that its all bolt on so its fine. What do I need to do? Do I need to jack the car up and get way in there? Will I need (or make it easier) help? Anything I should know that will make it easier? Will it come with instructions? Are they clear? Thanks for any help!
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Quote, originally posted by wicked1981 »Do I need to jack the car up and get way in there? It will help, but not necessary. If you do use a jack, make sure you use a jack stand also. Quote, originally posted by wicked1981 »Will it come with instructions? Are they clear? Thanks for any help! The instruction are very clear. One other thing, spray the rubber hangers down with some WD-40. Makes it easier to remove them. You will see what I'm talking about when the time comes. It's a very easy job to do.
Satellite 03 GT Retirement ----> Moderator for Genvibe.com 2002 - 2007 A fact of life: After Monday and Tuesday even the calendar says (removed)
Quote, originally posted by rasermon »One other thing, spray the rubber hangers down with some WD-40. Makes it easier to remove them. You will see what I'm talking about when the time comes. Good call! I would have had the exhaust swapped in under ten minutes including drinking a beer if I had just oiled those darn hangers right at the beginning! Pete
'02 Jetta 1.8T Silver Arrow/Black Leathuh - Neuspeed turbo inlet pipe, 17" VW Exor wheels, euro Bora tails, Neuspeed Sofsport Springs, Bilstein HD's, Da'lan hitch'03 20thAE GTI #3494 Imola Yellow/Black Recaros - Omori/AWE boost gauge, HPA Motorsports Short shifter, Neuspeed 28mm rear sway, REVO programming, Neuspeed turbo inlet pipe, FK Badgeless grille, Kamei eyelids and one big fat grin
Hi rasermon... I was wondering if you or anyone else would consider this mod for a non-CAI engine? I'm enjoying adding and chancing the few things I've done so far. This seems like a project that, though a bit more pricey than Groundwires, might make a nice little project for me and something I can tell people, "Yeah, I did that myself too".I'm assuming the sound won't be quite the same and the performance gains would be next to nil but what do you all think? GT here.Dave
Quote, originally posted by DavidPIL »I was wondering if you or anyone else would consider this mod for a non-CAI engine? By all means, yes! You can't go wrong doing one or the other and both mods is like shaking hands.
Satellite 03 GT Retirement ----> Moderator for Genvibe.com 2002 - 2007 A fact of life: After Monday and Tuesday even the calendar says (removed)
Hi wicked,but ofr me, I'm not sure about installing a CAI. I'm fairly happy with what I have... I don't want to increase the sound too much, don't seem to have problems with Horsepower, would just like to tweak the sound a little while maybe gaining a hp or 2... and I do like the look... so... I don't think the combo is for me.As for others, yeah, seems like a good deal.Dave
Dont exacly remember how it sounded before the intake but its not too loud unless you put the gas to the floor otherwise its quiet. The exhaust is louder than the intake I think. But its up to you you can always change your mind and do it later. I just mentioned it because you knock off a couple dollars if you buy the combo. Im waiting on the exhaust right now according to UPS its in Jan 23, 2004 2:38 P.M. HODGKINS, IL, US DEPARTURE SCAN. Expected arrival 27th Jan. Cant wait!!
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Well finally.... Went to UPS.com to check the status of my exhaust and its here in CA and out for delivery so should get it later today. I will take some pictures when I put it on (tonight unless something comes up) in case anyone needs them, has questions or just wants to see them.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Im interested in the some pics,, wicked and some reviews of overall sound quality,as Im not into the 5in fart can noise associated with most zing zing cars around my neck of the woods....Lata,Rog
I will use my digital camera to take pics and Ill take some video and ill post it up. I guess Ill do a before and after so everyone can get an idea of the change. Ill take my bro with me he can sit in the back seat or something because the CAI is pretty loud when I slam on the gas see if I can try to get the exhaust noise instead on intake.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
I got my Borla exhaust today and it is sweet! It's not too loud and it sounds sooo nice around 3000rpms not to mention the rest of the range. Got it for $337 off aj-usa.com
2003 Lava 2-tone GT:Remote Start,Borla exhaust, K&N intake, orange undercar neons, 7 color undercar L.E.D.s, stobe lights, spoiler, moon & tunes, grafxwerks,satelite radio, PA system Pics of my Vibe http://www.cardomain.com/memberpage/373589
Thanx for the sound and video Razor. Sounds sweet! Looks good too! I seen somewhere, were they asked about swapping the GT oval style with the round base style. Don't do it. They are tuned for the out put of your engine. It wouldn't hurt it but you won't get the performance your lookin for.
ok, so i'll probably be getting the combo now that I see that the labor wasn't bad. Now, is it gonna pass emissions?????? My only question about changing, AND, does this mess with the waranty of my car adding "performance" mods??
Would someone like to hear a different type of exhaust? I didn't do the bolt-on type, I did a full cat-back system with a weld-on aftermarket exhaust. My Vibe is in the shop but I should have it back soon. Just thought it might be interesting comparing the two types of exhausts
I'll call the shop tomorrow and see about how much longer it'll be before it's up and running again. This is an older pic, but it gives a nice view of the car (This one has been posted before)