Genesis Coupe wheels

Wheel and tire information and upgrade discussions
Post Reply
slow4dr
Posts: 23
Joined: Tue Apr 29, 2008 4:00 am

Genesis Coupe wheels

Post by slow4dr »

I've seen a few sets of stock Gen Coupe wheels for cheap on ebay lately and it's got me thinking. I'm in need of tires and I hate the stock wheels and offsets. I've searched the Genesis forums and I couldn't find what the stock offset is so I was curious if anyone has tried fitting them.I've been wanting something a little taller anyway.
lovemyraffe
Posts: 4288
Joined: Sun Oct 07, 2007 3:08 am

Post by lovemyraffe »

Those wheels will not fit. All the info I have found on them say the bolt pattern is 5x114.3. The Vibe's bolt pattern is 5x100.
March 2011 MOTMFebruary 2010 MOTM My GenVibe garage
bull77
Posts: 1976
Joined: Wed Mar 08, 2006 2:27 am
Location: Ottawa

Re: (lovemyraffe)

Post by bull77 »

Quote, originally posted by lovemyraffe »Those wheels will not fit. All the info I have found on them say the bolt pattern is 5x114.3. The Vibe's bolt pattern is 5x100.if he has the 2.4 2009 -- he's good to go
lovemyraffe
Posts: 4288
Joined: Sun Oct 07, 2007 3:08 am

Post by lovemyraffe »

Quote, originally posted by bull77 »if he has the 2.4 2009 -- he's good to goTrue, but he has an '03 GT.
March 2011 MOTMFebruary 2010 MOTM My GenVibe garage
dragon64
Posts: 131
Joined: Mon Oct 27, 2008 1:42 am

Re: (bull77)

Post by dragon64 »

Quote, originally posted by bull77 »if he has the 2.4 2009 -- he's good to gothat might not be 100% true. Even though the bolt pattern is the same with the offset of the Genesis wheels will probably push the wheel to far out on a Vibe and maybe clearance issue with the fender lip. Plus the center bore is much bigger on the Genesis so the wheels will be nowhere near hubcentric on a Vibe either. Will need a test fit and a need to machine a custom centering ring before you can say good to go.
2009 Vibe 1.8L Manual - DBW controller, Hydraulic engine damper, S/S brakeline retrokit,22mm solid Rear ARB, urethane rear coil dampers, Front strut bar with brake cylinder brace, PIAA 410 driving lights, PRM Intake Wilwood front brakes, Lexus hood lifts
slow4dr
Posts: 23
Joined: Tue Apr 29, 2008 4:00 am

Re: Genesis Coupe wheels (slow4dr)

Post by slow4dr »

Thanks guys! I'll keep looking
Post Reply