Hood Bumper...

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Hood Bumper...

Post by ragingfish »

Ok, so everyone who has worked on their horns knows that the two screws needing to be removed on opposite ends of hte grilles are countersunk into rubber bumpers...so over time with me unscrewing and screwing them back in (through my numerous horn installs)...one of the screws heads has become completely stripped...so the only way i have been able to remove it is by pulling the bumper off and using pliers to untwist the head -- resulting in me scratching the hell out of my facia (thankfully, under the hood, where it's not visible). Anyway, I looked up the part number, adn the part number for "Bumper, Hood Stop" is 88970437...and it's list price is $15.51!!!Now, I don't need the damn rubber piece. All I need is a stinking screw. Does anyone know if this bumper assembly (A) includes the screw, and (B) if the screw is available solo?I'd go buy a generic screw, but it needs to have the right head to proeprly hold on to the rubber bumper.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
KSNeptune
Posts: 451
Joined: Thu Nov 14, 2002 7:50 am

Re: Hood Bumper... (ragingfish)

Post by KSNeptune »

Take the old screw to a GOOD hardware store and see if you can find a match. I recommend looking for a stainless steel version of you can find one.If you can't find one at a hardware store, try a big auto parts store.KSNeptune
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Hood Bumper... (KSNeptune)

Post by ragingfish »

Like I said, I would, but nothing out there seems to have the right size head to grab the rubber bumper...
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
KSNeptune
Posts: 451
Joined: Thu Nov 14, 2002 7:50 am

Re: Hood Bumper... (ragingfish)

Post by KSNeptune »

Thats why I emphasized going to a GOOD hardware store. We have Home Depot, Walmart, Kmart, and a few lumber yards that carry "some" standard screws and nuts. But we also have a "Waters True Value" hardware store that has an entire aisle of tiny drawers with almost any kind of nut, bolt, screw, washer, etc., you could imagine. I've always been able to find matching whatevers there when no place else in town had them.KSNeptune
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Hood Bumper... (KSNeptune)

Post by ragingfish »

Hmm...i'll have to look into that. Thanks dude.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Hood Bumper... (silverawd26)

Post by ragingfish »

Yeah, I know that. I checked there.I need a freaking screw. Not the whole damn assembly. I'm not about to pay $18 for a screw!!! (that site charges base of 7.50 shipping) Anything over $1 is absurd!!!
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
cohocarl
Posts: 1478
Joined: Mon Jul 01, 2002 9:45 am

Re: Hood Bumper... (ragingfish)

Post by cohocarl »

quote:I need a freaking screw.
Sold 6/16/04 03 Vibe 5-speed, Hotchkis Sway Bars & Springs, Hooker Aerochamber, Panasonic Stereo, Hitch, Silverstars,04 Saturn Vue 2.2L Ecotec, 5-speed, 01 Stratus R/T Coupe 5-speed (wife's car) 85 Corvette 268 CompCam, 882 heads, FlatTops, 24lb injectors, Hooker Aerochamber true duals, 58mm TB, Holley AFPR, Siamesed intake base, Polished TPI.
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Hood Bumper... (silverawd26)

Post by ragingfish »

Yeah, they are separable.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Post Reply