FOG LAMP protectors for sale

ToolGuy · Post by **ToolGuy** » Wed Sep 21, 2005 4:08 am

Quote, originally posted by djpositivek Â»You should get these smoke colored to match your headlight covers. That's probably what I would do.I thought of smoked too. Looked for the paint at my local auto store and no luck. Anyone now where it can be found without mail ordering?

ArcsVibe · Post by **ArcsVibe** » Wed Sep 21, 2005 10:24 am

Nice work Todd! They still look good and I get a lot of questions about it!

ColonelPanic · Post by **ColonelPanic** » Thu Sep 29, 2005 8:55 am

Woo hoo, the yellow fog protectors came in today. The painting looks very well done - almost like the material itself is yellow. I'll have these installed in a couple of days. I have to figure out how to get my old fog overlays off of there first. But many pictures to come for sure. Thanks, Toolguy! Good job on these.

ColonelPanic · Post by **ColonelPanic** » Sat Oct 01, 2005 1:57 pm

They are now installed, and I'm quite pleased. Good job on these, Todd. Due to my funky sleep schedule, I was unable to get these installed prior to sundown, but I will have some pictures up tomorrow of the car during the day. Nice finish on them, nice fit, easy to install, and strong velcro. Very nice. And now, here are a few pics... Feel free to browse my album for more.Looking forward to seeing what these things look like in the daylight. Adds some much needed protection while also giving your car a personal touch, can't go wrong there!

ColonelPanic · Post by **ColonelPanic** » Sat Oct 01, 2005 9:52 pm

And here's a few pics once the sun came up! There's more where these came from if anyone is interested over at my photobucket album.I like 'em!

AzFusionGT · Post by **AzFusionGT** » Sun Oct 02, 2005 3:03 am

Looks good, ColonelPanic! Can't wait for mine to come.

POLO · Post by **POLO** » Sun Oct 02, 2005 6:36 am

Yea,me too,i wait mine too.

ColonelPanic · Post by **ColonelPanic** » Sun Oct 02, 2005 7:44 am

Quote, originally posted by AzFusionGT Â»Looks good, ColonelPanic! Can't wait for mine to come. Thanks. I'm sure you'll like yours, seeing what you just went through! Did you go for clear or are you getting yours in color?

merckx56 · Post by **merckx56** » Sun Oct 02, 2005 8:20 am

CP, is the fit really that poor on those things? It seems to have a huge gap on one side...Everyone seems to love them but every photo on here show fit issues...Not trolling, just curious...

ColonelPanic · Post by **ColonelPanic** » Sun Oct 02, 2005 9:21 am

I don't think the gap is anything excessive, personally. Considering the thickness of the material, the contours of the light's surface and the bumper surrounding the light, I think they fit fine. Lexan just can't conform to the shapes of the surface like a film would. If the gaps on mine seem excessive, that's probably "installer issues" on my part, I may not have them aligned just so. At any rate, gaps or no gaps, if it will keep me from having to spend hundreds of dollars on this car that I really don't have, these are so worth it.

merckx56 · Post by **merckx56** » Sun Oct 02, 2005 10:44 am

Okay, question answered...I would just worry about light escaping around the edges...of course I get up to check if my car is locked a few times a night...OCD is a *****...

ToolGuy · Post by **ToolGuy** » Sun Oct 02, 2005 9:58 pm

Quote, originally posted by merckx56 Â»CP, is the fit really that poor on those things? It seems to have a huge gap on one side...Everyone seems to love them but every photo on here show fit issues...Not trolling, just curious...No flaming here on my part in response to this... Being flat plastic they will not ever lay flat like CP said... Also the heat needs to be able to dissipate, you want a gap... Good observation in general however since you have never seen one in person future customers need to keep in mind, I offer a 10 day money back guarantee, written into the instructions. I stand behind my products and if someone accidentally installs them wrong, I will mail out new fasteners to correct it, no charge. I have done this twice already...I do not sell junk, sell lasting products and strive for happy people. I am easy going about feedback and changes.

ToolGuy · Post by **ToolGuy** » Mon Oct 03, 2005 12:45 am

Ladies and Gents, the first Matrix pair!!!Hard to convince over there! Kidding! Thanks Liz! Liz had one break and just replaced it...

Attached files

ColonelPanic · Post by **ColonelPanic** » Mon Oct 03, 2005 12:52 am

Very nice. You've got a good product.

ArcsVibe · Post by **ArcsVibe** » Mon Oct 03, 2005 1:13 am

Quote, originally posted by ColonelPanic Â»Very nice. You've got a good product. I totally agree! Thanks Todd

Vibedad · Post by **Vibedad** » Mon Oct 03, 2005 2:40 am

Installed mine on the weekend. Mine are blue and show just like the pics on Page 3 of this post!Excellent product - look great and fits good too!

ToolGuy · Post by **ToolGuy** » Mon Oct 03, 2005 4:44 am

Just an FYI to everyone...The yellow sprays differently than the blue and red. I am assuming since it is a lighter color...

Shadow-Vibe · Post by **Shadow-Vibe** » Mon Oct 03, 2005 6:00 am

Are you still looking for the paint to do a smoke color? If you finally make some I think I may take a set in smoke?

POLO · Post by **POLO** » Tue Oct 04, 2005 4:48 am

Hey thanks,i just received the kid.Man,it was on of the fast shipping.I'm in Canada,and i receive in 2 days. Thanks very much,great product with detailed instruction,even a lens cleaner. Soon,i will post picture.

ToolGuy · Post by **ToolGuy** » Wed Oct 05, 2005 10:47 pm

Quote, originally posted by Shadow-Vibe Â»Are you still looking for the paint to do a smoke color? If you finally make some I think I may take a set in smoke?Hello, I did look but have not had a real good chance to persue it yet... I will keep looking!

Flip-Side · Post by **Flip-Side** » Tue Oct 11, 2005 1:16 am

Quote, originally posted by Shadow-Vibe Â»Are you still looking for the paint to do a smoke color? Found some. Kinda expensive though, and not worth Tool-Guy's effort for only one set. A 2ft x 4 ft piece runs about $90 US. There is gray, and bronze.http://k-mac-plastics.net/poly...4.htm

ToolGuy · Post by **ToolGuy** » Tue Oct 11, 2005 2:24 am

Thanks for looking Flip!I looed at the local auto stores and even Hope Depot and no luck. I remember it many years ago but not now.I do have an idea for smoked, not sure if it wil work but I am tryng it at home now...I looked on ebay and I found it but this person wants $19.99 for a bottle plus $9.99 shipping...

Attached files

AzFusionGT · Post by **AzFusionGT** » Fri Oct 21, 2005 8:40 am

Thanks. I'm sure you'll like yours, seeing what you just went through! Did you go for clear or are you getting yours in color?[/QUOTE]I got the clear because fusion was not a choice...when it is, I'm there. All I can say is WOW! They were a snap to install, even for me. They look amazing. Thanks Todd.

Attached files

AzFusionGT · Post by **AzFusionGT** » Fri Oct 21, 2005 8:41 am

Passenger side

Attached files

AzFusionGT · Post by **AzFusionGT** » Fri Oct 21, 2005 8:45 am

One more...all lit up.

Attached files

Merzbow · Post by **Merzbow** » Fri Oct 21, 2005 3:37 pm

If you end up making smoked ones I may be interested.

ColonelPanic · Post by **ColonelPanic** » Fri Oct 21, 2005 3:54 pm

Looking good! No doubt they will probably pay for themselves, just give it some time. As I've always mentioned here, the Vibe is still pretty rare where I live - and wouldn't you know, last week I finally had a Vibe sighting with, you guessed it - a fog light that fell victim to an impact. I'm really liking mine. I think I'm well over 1,000 miles on them thus far and they're doing great. The fogs have been used for that entire time as well, and the paint still looks great after all that baking.

ToolGuy · Post by **ToolGuy** » Sun Oct 23, 2005 8:46 pm

Quote, originally posted by AzFusionGT Â»Thanks. I'm sure you'll like yours, seeing what you just went through! Did you go for clear or are you getting yours in color?I got the clear because fusion was not a choice...when it is, I'm there. All I can say is WOW! They were a snap to install, even for me. They look amazing. Thanks Todd.[/QUOTE]You are welcome and I am glad the install went well.... If you ever have an issue please let me know!

ToolGuy · Post by **ToolGuy** » Sun Oct 23, 2005 8:48 pm

Quote, originally posted by Merzbow Â»If you end up making smoked ones I may be interested.I am desperately trying to do smoked I just cannot get paint or material. I even tried window tint because that stuff does not want to come off windows once on and I used to tint windows. The trial failed... It pulled off easily and the fasteners pulled it off as well...Oh well, I will keep looking...

AzFusionGT · Post by **AzFusionGT** » Mon Oct 24, 2005 1:52 pm

First road trip with the new covers...up to Las Vegas Saturday afternoon, back Sunday. They passed with some bug splats, but still lookin' great.

Gandalf · Post by **Gandalf** » Sun Nov 06, 2005 6:40 am

I'd like to buy a set (pair) of clear ones for my '05 Vibe.I have non CC Paypal. Let me know how to get things rolling.You can E-mail me at g.gandalf@lycos.comI can't seem to get the PM system to work for me, so if you send me a PM, I may never get it...Thanks

ColonelPanic · Post by **ColonelPanic** » Sun Nov 06, 2005 6:52 am

Quote, originally posted by Gandalf Â»I can't seem to get the PM system to work for me, so if you send me a PM, I may never get it...Do you have any kind of popup blocking software installed? That could be the problem... And you can access your instant message history by going here.

ArcsVibe · Post by **ArcsVibe** » Sun Dec 18, 2005 11:10 pm

Bump bump bump! Makes a great Christmas stockings stuffer!!!!6 days left

21Rouge · Post by **21Rouge** » Sun Dec 18, 2005 11:16 pm

Quote, originally posted by ArcsVibe Â»Bump bump bump! Makes a great Christmas stockings stuffer!!!!6 days left I agree! But I bet an order today would only arrive in time for Christmas if delivered via his Corvette!

PHXLavaVibe · Post by **PHXLavaVibe** » Wed Dec 21, 2005 1:40 am

I'm ordering Red ones...I'm ordering Red ones...I'm excited...can you tell? Is there any good pics of the red ones installed (at night preferably). I think these will look awesome on my Lava

PHXLavaVibe · Post by **PHXLavaVibe** » Wed Dec 21, 2005 2:36 am

Okay scratch that last note! I guess I am ordering yellow ones instead. According to the Arizona Department of Public Safety "Amber" is the ONLY legal "Color" other than white allowed for fog lights. Red lights are strictly prohibited and only to be used by emergency vehicles.

ToolGuy · Post by **ToolGuy** » Sat Dec 31, 2005 8:31 am

Yup smart member! Got to check those state laws before buying a colored set to be on the safe side!

ArcsVibe · Post by **ArcsVibe** » Tue Jan 03, 2006 10:55 pm

Free bump! Spend your after X-Mas money wisely! Get one of these

PHXLavaVibe · Post by **PHXLavaVibe** » Sat Jan 07, 2006 5:13 am

Okay Todd, Here are some Pics as promised. I don't have any night shots yet but the daylight ones look pretty damn good if you ask me. Thank you again for this excellent product!Loyal Customer,WesThis is a before picture:

Attached files

PHXLavaVibe · Post by **PHXLavaVibe** » Sat Jan 07, 2006 5:15 am

Here's the after pic:

Attached files

PHXLavaVibe · Post by **PHXLavaVibe** » Sat Jan 07, 2006 5:16 am

Here's a close up shot:

Attached files

brbo · Post by **brbo** » Sat Jan 07, 2006 1:32 pm

Two questions - Cost to Canada (clear) ?? and Timeline to get them ??ThanksCheersB -'06AWD

ArcsVibe · Post by **ArcsVibe** » Sun Jan 08, 2006 12:38 am

Quote, originally posted by brbo Â»I am interested in this product but have a couple questions I PM you but I got no response,, whats the best way to contact you ??ThanksCheersB -'06AWDYou can ask here maybe some of us can help you out!

brbo · Post by **brbo** » Sun Jan 08, 2006 3:00 am

Two questions - Cost to Canada (clear) ?? and Timeline to get them ??ThanksCheersB -'06AWD

ArcsVibe · Post by **ArcsVibe** » Sun Jan 08, 2006 3:48 am

I believe the clear ones are 25$USD and the colored ones are 35$USD. He is in Michigan so I figure the shipping to be a week or so? He will confirm this for you.Sam

ColonelPanic · Post by **ColonelPanic** » Sun Jan 08, 2006 7:22 am

Very nice, PHXLavaVibe! Welcome to the Yellow Vibe Fog Light Club. I've had a set of those on my car for a while now and they're doing really good. I'm extremely happy with 'em. Good job on these as always, Todd!

ToolGuy · Post by **ToolGuy** » Sun Jan 08, 2006 8:21 pm

Quote, originally posted by brbo Â»Two questions - Cost to Canada (clear) ?? and Timeline to get them ??ThanksCheersB -'06AWDHello! For Canada it is still $25 USD, I have a special method in which I ship to Canada...I can cut the clear and have them ready in a 1-2 days (usualy one)...IM sent...

ToolGuy · Post by **ToolGuy** » Sun Jan 08, 2006 8:23 pm

Quote, originally posted by PHXLavaVibe Â»Here's the after pic:Great job Wes, looks fantastic! I am glad you like them! As always if you even have any issues please let me know!

PHXLavaVibe · Post by **PHXLavaVibe** » Mon Jan 09, 2006 12:06 am

Sure thing Todd. Thanks again for the great product!

brbo · Post by **brbo** » Fri Jan 20, 2006 11:31 am

FYI for all,, I was unsure of getting these, ToolGuy was GREAT !! Didn't want payment or anything coming to Canada,, advised me to review product and if I was satisfied to pay otherwise don't worry about it,,, not the normal buying policies of most things ont he web.In regards to the product - well packaged - received very quickly Vancouver BC - exactly as described - product looks great - very happy with whole process and product - would do again and recommend to anyone looking for Great Lens covers,,, Now I need to install them,,,Thanks ToolGuy!!!!Cheers,B -'06AWD