GenVibe - Community for Pontiac Vibe Enthusiasts

radioarno

I'd like to have more space in my car and want to carry the full-size spare I normally carry around, but on a rear hitch mounted carrier. Anybody do this? ANyone have a carrier for sale or where to get one? Fold away would be great...

radioarno

hey joatmon, I replaced that cig fuse, worked perfectly for one trip, and it blew again. Why would a fuse blow repeatedly? It's the cig fuse.

radioarno

Thanks for all the detail!!

radioarno

Oh this is brilliant. So, a few questions. 1. Where would I find this fuse block? 2. Are you saying that I coukd replace the blown Cig fuse with either the Inv from the bottom far left column, or the ppoint from bottom second column?

radioarno

I think I’ve blown a fuse that is part of my clock and radio circuit cuz my clock and radio have died. How do I locate, remove, buy, and replace the fuse. I now have an 07 Matrix

radioarno

Thanks a ton. Based on my eyeballing it in the rain, its the rear one, but I'll only know better once I get under it. I tried posting the videos I took but realized that I can't post video here, and I had no photos, just vid. I"ll check it out when the weather is nicer and I'll let you know. Th...

radioarno

oh that's great info. Is it likely that a bolt rusted out? If I get a replacement bolt is it likely that I'll just need to insert and tighten?

radioarno

A metal shield seems to have come loose and is rattling. Can I fix this without a lift? Using just a floor jack and stands? Is it a simple bolt that has detached?

radioarno

I have the same problem, ten years later than this thread. Is the gas venting line platic tubing, metal? How to declog it if it is clogged? What would it be clogged with?

radioarno

hi is there any safety issue with my OEM "alloy" rims paint blistering bubbling peeling, coming off?

radioarno

joatmon wrote: ↑Sat Jan 21, 2023 5:17 pm Congrats on the girlfriend

and I suppose getting rid of the CEL is nice too

she's awesome. Best one ever. And the CEL, I still can't believe it. It bothered me so much, kinda felt like my car had a disease.

radioarno

So, to recap. 2004 base vibe. Bought 2 years ago. CEL went on as I drove it away. Vrought to mecahnic, who took codes, three codes. I paid $250 for those three codes. Mcchanic said 'replace canister, fuel filler neck and a valve under the hood, 1400 bucks. I said I can't, just bought the car for 4 g...

radioarno

I'm getting something like exhaust smell in the cabin when the heater is on. I've been getting the codes P0441, P0442,P0446 for the last two years and decided I wasn't going to try to chase down, fuel filler neck, cannister, purge valve, all that stuff. But this exhaust smell in the cabin is new. My...

radioarno

hi 2004 Vibe, cloudy headlights. My headlights aren't bright enough at night, and I'm a senior so I need more light. Does it make more sense to get the headlights sanded (body shop will charge me $100) do it myself, or buy some new bulbs? And, are there any conventional bulbs that are brighter than ...

radioarno

if you have a spare clip I'll send you the money to send it to me. It will certainly cost less than buying a bag of 25 clips.

radioarno

thanks. Any idea what kind of plastic it is? Polyethylene, polypropylene. polystyrene, pvc? Those clips are $18 for 50, $9 for 25, I just need one, perfectly happy to glue.

radioarno

I need to glue the trim which is coming loose, By trim I mean the stuff that's under the doors and over the fenders on the exterior body. I need to glue it to the metal and some glues don't work on some plastics. Anybody know what kind of plastic that stuff is?

radioarno

great advice. Thanks.

radioarno

hi all, 2004 base vibe, driver door sounds like its about to fall off what I open it. Not sure if when I close it, maybe, mybe not, but certainly when I open. I figured the hinges were rusty, but can't really get at the hinges, but there's this plastic looking black thing, might be plastic, might be...

radioarno

Sucks. If you saw my post three years ago on the Honda Fit owner's group (fitfreaks) you'd see that I had a very similar experience. I was so effed over by everyone I said F it, and I didn't drive for almost three years. Just came back to driving with an 04 Vibe this past summer, in an effort to get...

radioarno

zbyers, I'm going to crawl under the car and try to find those hoses and reverse them. Do you have access to any pics or diagrams of where I'd find the hoses to reverse? And would it just involve pulling them both off where they insert somewhere into the canister, and put each one on the other ones ...

radioarno

just want to say that after visiting three body shops I got a nice body guy to weld three pieces of steel to my underbody, fixing the holes for $400. Feel really good about it. He said that I shouldn't jack it up from there anymore, I should use the strong rail further in, but there are no more hole...

radioarno

effin awesome. You're awesome. Thanks.

radioarno

Rock Auto says I also need to get strut mount and strut bellow? I hadn't seen that mentioned anywhere else.

radioarno

https://www.canadiantire.ca/en/pdp/monr ... p.html#srp is this going to work? Quick strut? I'll just need this and the sway bar?

radioarno

just to clarify. Rock Auto has "stabilizer bar assembly" and "stabilizer bar link". Which of those do I get?

radioarno

sweet. thanks. I'm going to do it. I'll keep you posted once I start.

radioarno

thanks. I'm going to get the complete strut assembly including mounts from rock auto. The youtube tutorial says replace stabilizer bars too. Should I order stab bar bushings and stab bar link in addition to the stab bar assembly?

radioarno

I brought my 04 vibe to another body shop to have him look at my destroyed front jack point. He said to fix it will cost more than the car's worth. He said I paid about 2x what I should have for the car (I paid 4500 five months ago for an 04 base automatic with 160k kms=100k miles). While he was loo...

radioarno

very cool for the precision. thanks a bunch.

radioarno

CanadianYeti, where are you located? I'm asking because I need some body work done in a very similar area. My forward drivers side jack point collapsed due to rust as I was trying to jack it up to put winters on. I got quoted 1000 and 400. I don't quite trust the 400 because he's going to use 22 gau...

radioarno

Precisely my thoughts I’m going to ask him if he can use heavier steel thanks very much

radioarno

thanks

radioarno

just brought it to another body shop who will fix it for $400. He's going to cut out the rotten part and weld some 22 guage steel in there. He said I wouldn't be able to jack it up anymore by the side because the 22 quage steel can't support the car, but hey, getting it fixed for $400 is *a lot bett...

radioarno

Update: you guys were right of course. I brought it to mechanic, who said that the car can't be safetied, can't be sold except for parts. Recommended I bring it to autobody shop and see what they say. They recommended a good shop. Just came back from autobody shop. He said to fix it will cost minimu...

radioarno

Are the wheels bold pattern etc on 2008 Toyota Matrix XR fitting on a base 2004 Vibe? Thanks.

radioarno

It would sell in Toronto Canada for exactly $4000 Canadian dollars.

radioarno

isn't that interesting and not a moment too soon. i just changed my cabin and air filters, and the hood won't latch. fml. gotreats, so what did you do with that broken bolt? Did you have a replacement bolt?

radioarno

Okay I'm going to stop messing around. I have an appt next Friday with a mechanic to get the car up on a hoist and have pros look at it. They're not going to charge me anything to look at it. Thanks for telling me it's potentially serious.

radioarno

thanks. Amazing that there's no tow hook in the back. I wish there were for snowy Canada. Yeah, I used the axle beam. thanks.

radioarno

Hi everyone where’s a rear jack point at the back centre of the vehicle to raise both wheels in the air please? I have no tow hitch.

radioarno

IMG_0033.JPG IMG_0033.JPG okay here's better pics. DRiver side, at the jack point. I"m not super concerned about the chassis unless you guys tell me i should be concerned. i'm more concerned about the hole in the un dercarriage just ahead of the jack point. please take a look and let me know. ...

radioarno

thanks

radioarno

I jacked up the front side of my 04 vibe this evening to change to winters and on the driver side I just couldn't get it high enough. Dropped the jack (not the scissors jack, but a hydraulic jack) and looked underneath. The jack point had collapsed completely, I assume due to rust, and I saw just fo...

radioarno

thanks very much. By the way, thanks again for telling me how to reconnect the wires for the flashers and the heater. It was so obvious once I opened it up.

radioarno

joatmon, one more thing. When I open the doors the dome light doesn't come on. I can't find any switch for the dome light. There must be one somewhere.

radioarno

thanks very much.

radioarno

Hi 2004 base vibe automatic, Bought four months ago, With an aftermarket radio which the seller took out at my request and put back in the original radio. Four months later I want to use my emergency flashers and the emergency flasher button does not turn on the emergency flashers and right next to ...

radioarno

I sanded the lip of the fuel filler neck in hopes of removing the check engine light. I then drove 300 miles. It didn't work. I guess I have to spring for that new charcoal canister. I was hoping to avoid it...

radioarno

interesting. Good on you for finding it. That could have been super frustrating. So you found that you couldn't test the vent valve on the canister?

Search found 63 matches