Anyone who has a 4wd Vibe/Matrix should read this thread on MV.net. Nick and Fusion have uncovered all the mystery. http://www.matrixvibe.net/foru...=4243
Unfortuntatly I dont have any pics of the exhaust. I didnt get any pics when it was on the lift. Ill explain it as best as I can...Im using the stock header/down pipe to a high flow cat to a striaght pipe going back to just before the differential. Then with 2 small bends, it cuts across the driveshast to the flowmaster muffler. The muffler is mounted on a 45degree angle at the back drivers side corner of the car. Then the stock tail pipe sticks out the end. This is using all 2.25" pipe and no resonator.This was designed and installed by Jannetty Racing in Conneticut.