AWD Exhaust Gaskets - First Gen

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
modieselguy
Posts: 11
Joined: Thu May 27, 2010 11:57 am

AWD Exhaust Gaskets - First Gen

Post by modieselguy »

I developed an exhaust leak on my 2003 AWD recently and finally had time to show it a little attention. If you go to your nearest parts store and tell them you have an all wheel drive model they will either tell you "We do not have a listing for your exhaust system" or will simply give you front wheel drive parts. Unfortunately, FWD exhaust is not the same as AWD exhaust and Walker Exhaust does not list parts for that model. Below are the correct gasket part numbers for First Generation AWD Vibe and Matrix.Manifold to Downpipe - 31378 (Walker)Downpipe to Catalytic Converter Assembly: 31360 (Walker)
modieselguy
Posts: 11
Joined: Thu May 27, 2010 11:57 am

Post by modieselguy »

It has to do with the exhaust pipes being smaller to route around and next to the driveshaft.
Post Reply