Pedals, Shift Knobs...

[Mario]

I am looking to doing some interior decorating in my Vibe with some momo pedals, shift knobs and maybe a e-break cover.My question is will I have a problem fitting this stuff in?

[Mrizzle05]

Ive got the momo shifter knob from a genviber here. Its almost as long as the stock shifter. theres a tiny lil space between the shifter and boot

[Mario]

How about pedals? I saw a set of momo pedals I liked on ebay, does anyone know if I'll have a problem with making them fit?

[Jahntassa]

Shouldn't. I think i've seen one or two vibes with them. They're pretty universal.The shifter is a little bit harder if you have an automatic. Stick should be pretty easy, just twists off.

[NascarXprt]

with auto you have to get an aftermarket shifter with the over drive button and get the two screws out and other fun stuff.

[apple0seed]

You can get a metal ring-thingy that will attach the shiftknob to the boot.Anyplace that sells momo should also carry this.

[NascarXprt]

is that a matrix int. or a vibe caus i dont see the house hold outlet with button on there.?oh and welcome to the site apple0seed.

[ballrub]

If your's is a manual shifter, then just about any aftermarket shift knob will work. If it's an automatic, then you will need to find an aftermarket automatic shift knob with an overdrive button. They're out there, but harder to find.Most aftermarket pedals are universal, meaning they use some kind of clamp mounting hardware, but make sure they are mounted very securely (you don't want a pedal coming off while driving now, do we?).An aftermarket e-brake cover will not work on our cars without serious modification to your center console, so don't even bother.Good luck, and psot pics when you've done your mods!

[drunkenmaxx]

Quote, originally posted by ballrub »An aftermarket e-brake cover will not work on our cars without serious modification to your center console, so don't even bother. it's been done. here's how this feller did it:http://forums.genvibe.com/zero...03619sounds like a job i wouldn't be willing to do, but not too difficult for you unlazy people.

[ballrub]

Quote, originally posted by drunkenvibe »it's been done. here's how this feller did it:http://forums.genvibe.com/zero...03619sounds like a job i wouldn't be willing to do, but not too difficult for you unlazy people.,,,and BruiserVibe writes: "The e-brake handle and boot fit pretty good. I had to unbolt the console, rip the stock handle off, put the boot on, reinstall the console, and put the handle on. I think some fitting around where the fitting screws for the handle hit the e-brake shaft would be good to make the handle fit more snugly."Sorry...but when you have to "unbolt the console, and rip the stock handle off", that's getting "serious" for me!!! LOL

[drunkenmaxx]

Quote, originally posted by ballrub »Sorry...but when you have to "unbolt the console, and rip the stock handle off", that's getting "serious" for me!!! LOL oh me too! what if i can't get it installed right? it's screwed then!just posting for those brave souls who may venture to try it.

[Mario]

Thanks for the information. By the way, my car is manual. I've never seen any of these connectors for sale (boot to shift knob).