Tire size and lug nuts...
Tire size and lug nuts...
I got a set of Scion TC 17s (take offs) from my new neighbor for $150. What is the correct tire size for this application? I'm thinking 215/45-17...And will my stock lug nuts work on the wheels?TIAM
2004 Vibe GT 6 speed2006 Ridley DamoclesMen have three basic needs...eating, sleeping, and (removed), and I can do all three in my car...by myself!!!
-
NUBlackshirts
- Posts: 509
- Joined: Wed Dec 08, 2004 5:14 am
Re: Tire size and lug nuts... (merckx56)
Scion being a Toyota product, I would think the stock lugs would work fine. As far as tire size goes, you could use the following:215/45-17215/50-17I also believe a 225/45-17 would work.Please post some pics of your car with those Scion wheels. I was thinking about doing the same thing with mine.
'04 Frosty GT <---Click here!Tein S-Tech springs; Tokico HP struts;Progress rear sway bar; DC Sports strut tower bar;Scion TC wheels; K&N Typhoon intake;GG Racing ground wires; JAW voltage stabilizer;FilterMAG SS-250; Militec-1; Sirius Satellite Radio
-
ragingfish
- Posts: 11022
- Joined: Tue Oct 15, 2002 8:23 am
Re: Tire size and lug nuts... (merckx56)
Original factory tires are 215/45/17. Those wheels will fit, they do use a 5x100 bolt pattern, but I can't say if the lugs would work or not. I think alloys usually use special ones...
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)