What happened to Bluebatmobile.com?

Psychobroker · Post by **Psychobroker** » Sun Feb 20, 2005 2:31 am

I was thinking about smoking out my tails, so I wandered over to http://www.bluebatmobile.com, but found that it's broken. Does anyone know if bluebat still actively sells his overlays?

ColonelPanic · Post by **ColonelPanic** » Sun Feb 20, 2005 2:40 am

I don't really know! I sent an e-mail a few weeks back about some of the red backup light overlays, never heard a peep back from Bat. Hope he's still selling the stuff, damn I love those fog overlays! I'd still like to make the lexan fog covers like Toolguy has and buy some more overlays.

ragingfish · Post by **ragingfish** » Sun Feb 20, 2005 4:09 am

I IMed him and e-mailed him asking about pics of the other overlay colors for the fogs, never heard anything until about 3 weeks later when i got an email to the effect of "so are you buying or not?"

Blue Batmobile · Post by **Blue Batmobile** » Sun Feb 20, 2005 8:07 am

site was down for a bit. Up and running again folks !BatÃ¢â€žÂ¢

Psychobroker · Post by **Psychobroker** » Sun Feb 20, 2005 8:40 am

woo hoo Thanks BBEDIT: Can you do smoked tails, or just redouts?

Merzbow · Post by **Merzbow** » Sun Feb 20, 2005 12:46 pm

I've been wanting smoked tails for billions of years and so far I have NEVER gotten a straight answer from anyone!!!!!

Blue Batmobile · Post by **Blue Batmobile** » Tue Feb 22, 2005 9:09 pm

I can do smoked tails. Where's my test car?Bat

damronjr · Post by **damronjr** » Tue Feb 22, 2005 10:15 pm

Here I am! Just let me now when and where! I'm in SD, too!

Psychobroker · Post by **Psychobroker** » Wed Feb 23, 2005 1:28 am

Quote, originally posted by Blue Batmobile Â»I can do smoked tails. Where's my test car?Bat Ahh, didn't know you'd need another after already doing the redouts. But Damronj's down there in your parts!

damronjr · Post by **damronjr** » Wed Feb 23, 2005 1:40 am

Quote, originally posted by Psychobroker Â»Ahh, didn't know you'd need another after already doing the redouts. But Damronj's down there in your parts! I volunteered and emailed him, but haven't gotten a response yet.

Ponyota · Post by **Ponyota** » Thu Mar 17, 2005 9:52 am

Any word yet? I also want to have the blackout tails. As soon as I find out something then I'll order the smoke fogs and tails. Have you guys seen how many things hes did for the Trix? Like 10X more things.

damronjr · Post by **damronjr** » Thu Mar 17, 2005 9:54 am

Quote, originally posted by Ponyota Â»Any word yet? I also want to have the blackout tails. As soon as I find out something then I'll order the smoke fogs and tails. Have you guys seen how many things hes did for the Trix? Like 10X more things. I never heard back from him. I put the post on here that I would allow him to use my Vibe and even emailed him, but he never responded to me.

Ponyota · Post by **Ponyota** » Thu Mar 17, 2005 9:57 am

Guess he doesn't want our business then. I'll email Ryan and ask him if he can help us out. Unless someone already has?

ragingfish · Post by **ragingfish** » Thu Mar 17, 2005 10:20 am

He doesn't seem to want business from us. I had the same problem.I asked Ryan about doing fog overlays he said he could do it no problem, but I decided not to get them.I bet you anything he'll do redouts or smoked overlays!

vibe2003 · Post by **vibe2003** » Thu Mar 17, 2005 10:33 am

i would like to have smoke out tail light also, cause it's match red and black of my car, with blue H.I.D to add lol.

Ponyota · Post by **Ponyota** » Sat Mar 19, 2005 9:37 am

Quote, originally posted by Merzbow Â»I've been wanting smoked tails for billions of years and so far I have NEVER gotten a straight answer from anyone!!!!!I emailed Ryan today and he responded quickly! He said that the Vibe taillight has the two ridges on it thatwould make laying vinyl over it quite difficult unless it was done insections. He'll be looking into some companies that manufacture the quality vinyl that he needs to do this kind of job. Lets keep our fingers crossed on this one. I hope he'll be able to pull this one off! I personally want this badly for my tails He said that the fog light overlays won't be a problem to make. I'll be getting those from him to. I'll let you know what he says when I hear back from him.

ragingfish · Post by **ragingfish** » Sat Mar 19, 2005 1:11 pm

Fear not Ponyota!Ryan has never let me down!I bet he'll be able to do tails for us!

Ponyota · Post by **Ponyota** » Sun Mar 20, 2005 4:29 am

Quote, originally posted by ragingfish Â»Fear not Ponyota!Ryan has never let me down!I bet he'll be able to do tails for us! I hope your correct. I was shooting emails back and forth with him last night and he suggested another option to the vinyl. He said, to spray-tint the lenses with VHT Night Shades, a couple of coats of clear coat and it would give me the exact look I'm after, but it would obviously be permanent. Im really looking for something that will not be so permanent. If needed I would like to be able to take it off. I'll hang in there and keep my fingers crossed!

GrafxWerks · Post by **GrafxWerks** » Sun Mar 20, 2005 1:02 pm

Robert is correct on all counts. I'll see what I can get in terms of vinyl, I need something flexible that customers can install relatively easily, and I've had a havent been able to find a colored transparent vinyl of that type in the past.I'm hoping to have an answer one way or the other by the end of this week.- RyanGrafxWerks

damronjr · Post by **damronjr** » Sun Mar 20, 2005 1:15 pm

Quote, originally posted by GrafxWerks Â»Robert is correct on all counts. I'll see what I can get in terms of vinyl, I need something flexible that customers can install relatively easily, and I've had a havent been able to find a colored transparent vinyl of that type in the past.I'm hoping to have an answer one way or the other by the end of this week.- RyanGrafxWerksThanks Ryan! We know you love us Vibe onwers!

Mase · Post by **Mase** » Mon Mar 21, 2005 3:21 am

Quote, originally posted by damronjr Â»I never heard back from him. I put the post on here that I would allow him to use my Vibe and even emailed him, but he never responded to me.He's a pretty busy family man. I've met him in person a couple times and he's a very nice guy. He showed up at our Matrix meet in San Diego yesterday and personally installed some overlays for his customers.If I knew you were waiting for a response from him, I would've asked him about the Vibe overlays. If you come out to one of our SD meets, he can probably fit your car and cut them for you on the spot.

damronjr · Post by **damronjr** » Mon Mar 21, 2005 3:32 am

Quote, originally posted by Mase Â»He showed up at our Matrix meet in San Diego yesterday and personally installed some overlays for his customers.If I knew you were waiting for a response from him, I would've asked him about the Vibe overlays. If you come out to one of our SD meets, he can probably fit your car and cut them for you on the spot.OK, does somebody want to tell me about these things! I don't go to MO very often, but I would really like to be in the loop about these meets. I emailed him quite a while back and never got a response. Not very professional if you ask me. If you are going to run a business, with or without a family, you have to be professional and respond to your customers, especially if you make an offer like he did and then never respond to it. I would really like to be informed about these meets, too. Please let me know when you guys are going to be out here. I have yet to meet with anyone but 1 other Vibe owner since I bought my Vibe over a year ago and would really like to. How many times have I tried to get something together for SoCal and get next to no response and you guys are meeting right down the street from me and no one even tells me about it.

Flip-Side · Post by **Flip-Side** » Mon Mar 21, 2005 9:46 am

You can always make your own with any adhesive backed vinyl film.

Vibedad · Post by **Vibedad** » Wed Oct 05, 2005 10:44 pm

I e-mailed him on Monday and he got back to me right away. I reached him at:dubblea@peoplepc.comTrust this helps and that I did not break any rules by posting his e-mail address!

northvibe · Post by **northvibe** » Thu Oct 06, 2005 12:46 am

I am ordering tail light overlays from him today actually, he still sells them but the site is down. when you email him he has a link to a photoblog of all the cars and overlays you can buy with prices etc.

ColonelPanic · Post by **ColonelPanic** » Thu Oct 06, 2005 5:49 am

Quote, originally posted by Flip-Side Â»You can always make your own with any adhesive backed vinyl film. Do you have any sources of that sort of material? The only one I know of would be the Laminx stuff, but I don't know of any other sources. What is the technical name for this kind of material that one could search for?

Blue Batmobile · Post by **Blue Batmobile** » Mon Oct 10, 2005 2:28 pm

Link to my tempoaray gallery is in my sig below .BatÃ¢â€žÂ¢

Flip-Side · Post by **Flip-Side** » Mon Oct 10, 2005 8:28 pm

Quote, originally posted by ColonelPanic Â»Do you have any sources of that sort of material?I did a search for "vinyl film" and came up with a bunch of hits. Most only let you buy in bulk though.

What happened to Bluebatmobile.com?

What happened to Bluebatmobile.com?

Re: What happened to Bluebatmobile.com? (Psychobroker)

Re: (Blue Batmobile)

Re: (Psychobroker)

Re: (Blue Batmobile)

Re: (Blue Batmobile)

Re: (Psychobroker)

Re: (damronjr)

Re: (Ponyota)

Re: (damronjr)

Re: (Ponyota)

Re: (Blue Batmobile)

Re: (Merzbow)

Re: (Ponyota)

Re: (ragingfish)

Re: (Ponyota)

Re: (GrafxWerks)

Re: (damronjr)

Re: (Mase)

Re: (damronjr)

Re: What happened to Bluebatmobile.com? (Psychobroker)

Re: (Flip-Side)

Re: (ColonelPanic)