GrafxWekx Decals Installed!

Body kits, spoilers, lights, and anything on the exterior of the vehicle
Reynoma
Posts: 868
Joined: Tue Aug 12, 2003 11:38 pm

Re: VVT-i Engine Cover Overlay Done (wicked1981)

Post by Reynoma »

Wicked,You did a really good job on the "PONTIAC" overlay. I wouldn't post a picture of mine, I did such a lousy job putting it on. I found it very difficult.
Philippians 2:11
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: VVT-i Engine Cover Overlay Done (Reynoma)

Post by wicked1981 »

Quote, originally posted by Reynoma »Wicked,You did a really good job on the "PONTIAC" overlay. I wouldn't post a picture of mine, I did such a lousy job putting it on. I found it very difficult.Really? I thought it was simple. I had one problem though on the last Vibe decal after I was trying to align it and dropped it on the ground. not too bad but got a little dust that I could not remove you cannot tell unless you get to the floor and stare at it but other than that it was really simple. The PONTIAC letters were a little tricky because they are so thin you have to align perfect. Nice product though. Ill have to order the engine cover decals.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Reynoma
Posts: 868
Joined: Tue Aug 12, 2003 11:38 pm

Re: VVT-i Engine Cover Overlay Done (wicked1981)

Post by Reynoma »

Forgot to say, I also like the 3rd brake light overlay...may have to get that one!
Philippians 2:11
Psychobroker
Posts: 2492
Joined: Wed Jul 16, 2003 6:09 am

Re: VVT-i Engine Cover Overlay Done (Reynoma)

Post by Psychobroker »

Ryan, those VVTL-I engine cover decals are going to make me buy yet another round! This will be my 5th order from you lol. You are the MAN...thanks again!-Christian/Psychobroker
GrafxWerks
Posts: 171
Joined: Mon Aug 12, 2002 11:05 am

Re: VVT-i Engine Cover Overlay Done (Psychobroker)

Post by GrafxWerks »

Wicked1981, the pics are great, if you take any more, I'd love to see them/add them to the site!Quote, originally posted by Psychobroker »Ryan, those VVTL-I engine cover decals are going to make me buy yet another round! This will be my 5th order from you lol. You are the MAN...thanks again!Let me know what I have to do to get a 6th order - RyanGrafxWerks
Triton
Posts: 2198
Joined: Wed Aug 14, 2002 1:24 am

Re: VVT-i Engine Cover Overlay Done (Psychobroker)

Post by Triton »

Quote, originally posted by Psychobroker »This will be my 5th order from you lol. You are the MAN...thanks again!Only 5 orders? LOLI'm not sure how many orders I've had with Ryan, but everyone of them is awesome. He has made several decal requests for me including the GenVibe.com logos and the inside mounted Vibe GT 3rd brake light decals. Not to mention the company decals he has made. I have told Ryan many times as well that he is the man! Thanks Ryan!
***SOLD***2003 Vibe GT Monotone Neptune - Inaugural October 2004 Vibe of the Month***SOLD***

Now the proud owner of Titanium Silver 2012 Kia Optima SX
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Re: VVT-i Engine Cover Overlay Done (GrafxWerks)

Post by AKLGT »

sweet! that looks pretty good, ryan! too bad my engine cover needs to be repainted! lol
AKLGT1998 Subaru 2.5RS
msmyer
Posts: 1229
Joined: Mon May 13, 2002 12:00 pm

Re: VVT-i Engine Cover Overlay Done (trdvibe)

Post by msmyer »

Nice Pictures!
‘03 Vibe with 317k and still going.............................

Other Mods: Sony X-Plod Headunit & Reflective White GVC decalMy Car at Cardomain.com... http://www.cardomain.com/id/msmyer
GrafxWerks
Posts: 171
Joined: Mon Aug 12, 2002 11:05 am

Re: VVT-i Engine Cover Overlay Done (Triton GT)

Post by GrafxWerks »

Quote, originally posted by Triton GT »Only 5 orders? LOLI'm not sure how many orders I've had with RyanCount as of tonight (including your most recent) is 16! LOL- RyanGrafxWerks
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Post by AKLGT »

ryan, i will get that other scanned in tonight hopefully. i may have left it at work. no hurries on the cover tho, so no biggie.
AKLGT1998 Subaru 2.5RS
Houston
Posts: 787
Joined: Fri Nov 01, 2002 3:04 am

Re: VVT-i Engine Cover Overlay Done (Triton GT)

Post by Houston »

Where do we get the GenVibe.com logos decals? (Maybe this is mentioned elsewhere, but I havn't been there.)
2009 Base 2.4L with a few add-ons.
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: VVT-i Engine Cover Overlay Done (Houston)

Post by ragingfish »

http://www.grafxwerks.com/prod...LOGO1scroll down, you'll see 'em. both styles.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Triton
Posts: 2198
Joined: Wed Aug 14, 2002 1:24 am

Re: VVT-i Engine Cover Overlay Done (GrafxWerks)

Post by Triton »

Quote, originally posted by GrafxWerks »Count as of tonight (including your most recent) is 16! LOLLOL! Wow, even I didn't think it was that high! It's your fault Ryan for making such nice stuff.
***SOLD***2003 Vibe GT Monotone Neptune - Inaugural October 2004 Vibe of the Month***SOLD***

Now the proud owner of Titanium Silver 2012 Kia Optima SX
Psychobroker
Posts: 2492
Joined: Wed Jul 16, 2003 6:09 am

Re: VVT-i Engine Cover Overlay Done (Triton GT)

Post by Psychobroker »

Quote »Count as of tonight (including your most recent) is 16! LOL holy crap!
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: VVT-i Engine Cover Overlay Done (GrafxWerks)

Post by wicked1981 »

Quote, originally posted by GrafxWerks »Wicked1981, the pics are great, if you take any more, I'd love to see them/add them to the site!Well I would be more than happy to take more pics. Is there any decal you need all of them angles? Let me know.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Triton
Posts: 2198
Joined: Wed Aug 14, 2002 1:24 am

Re: VVT-i Engine Cover Overlay Done (Psychobroker)

Post by Triton »

Quote, originally posted by Psychobroker » holy crap!A lot of those orders are for vendor logos of mods I have on my car. I chose to order all of them through Grafxwerks so they would all look the same. My Vibe is coming along nicely. I'm almost to the point I want to be before our Michigan rally this summer.
***SOLD***2003 Vibe GT Monotone Neptune - Inaugural October 2004 Vibe of the Month***SOLD***

Now the proud owner of Titanium Silver 2012 Kia Optima SX
Reynoma
Posts: 868
Joined: Tue Aug 12, 2003 11:38 pm

Post by Reynoma »

Wicked,Is that an "internal mount" 3rd brake light decal? If yes, how easy was it to install?
Philippians 2:11
Triton
Posts: 2198
Joined: Wed Aug 14, 2002 1:24 am

Re: (Reynoma)

Post by Triton »

Quote, originally posted by Reynoma »Wicked,Is that an "internal mount" 3rd brake light decal? If yes, how easy was it to install?I know you asked Wicked, but I also have an internal mount 3rd brake light decal. They are very easy to install. Just remove the two 10mm nuts from the hood and it exposes the opening on the window. Clean the area, line it up and apply. You're done. Very easy.
***SOLD***2003 Vibe GT Monotone Neptune - Inaugural October 2004 Vibe of the Month***SOLD***

Now the proud owner of Titanium Silver 2012 Kia Optima SX
Reynoma
Posts: 868
Joined: Tue Aug 12, 2003 11:38 pm

Re: (Triton GT)

Post by Reynoma »

Thanks Triton.
Philippians 2:11
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: (Triton GT)

Post by wicked1981 »

Quote, originally posted by Triton GT »I know you asked Wicked, but I also have an internal mount 3rd brake light decal. They are very easy to install. Just remove the two 10mm nuts from the hood and it exposes the opening on the window. Clean the area, line it up and apply. You're done. Very easy.Yeah its that simple took about 10 minutes. Really easy make sure you think about how you place it I had my bro (14yrs) helping me and he alsmost places it upside down. Just clean and apply it also helps a little if its warm (room temp) it seems to stick easier to the glass.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
Reynoma
Posts: 868
Joined: Tue Aug 12, 2003 11:38 pm

Post by Reynoma »

Just ordered my brakelight decal (internal). Cannot wait. (For the record, this is only my 2nd official order from Grafxwerks...I did buy some of Ryan's decals from a fellow GenViber who decided they didn't want them)
Philippians 2:11
Jahntassa
Posts: 2979
Joined: Wed Jul 09, 2003 2:06 pm

Post by Jahntassa »

Image of teh car! RYAN! This is for your front page. :D
2003 Vibe GT Lava"He inched his way up the corridor as if he would rather be yarding his way down it.""For a moment, nothing happened. Then, after a second or so, nothing continued to happen." - Douglas Adams...we all miss you
GrafxWerks
Posts: 171
Joined: Mon Aug 12, 2002 11:05 am

Re: (Jahntassa)

Post by GrafxWerks »

Can you send me an un-cropped version (800x600+ would be awesome) please?Thanks!- RyanGrafxWerks
Jahntassa
Posts: 2979
Joined: Wed Jul 09, 2003 2:06 pm

Post by Jahntassa »

Check your PM, Ryan!
2003 Vibe GT Lava"He inched his way up the corridor as if he would rather be yarding his way down it.""For a moment, nothing happened. Then, after a second or so, nothing continued to happen." - Douglas Adams...we all miss you
GrafxWerks
Posts: 171
Joined: Mon Aug 12, 2002 11:05 am

Re: (Jahntassa)

Post by GrafxWerks »

You're famous - Ryan
Post Reply