Screws for the front plate
Screws for the front plate
The front plate is part of a kit that we had to installed. It only came with two screws to bolt the bracket to the bumper. Were there suppose to be screws to screw the plate on?We didn't get them. We went back to the dealer and he gave us the wrong ones TWICE. We'll have to go back again. (I shold bring a screwdriver to see it it works before I leave the lot).But I'm wondering, is there something I can say to them to help them out?
2004 Vibe, Auto Trans. Built Sept 2003. Date in service May 2004. Sold May 2006.
-
ragingfish
- Posts: 11022
- Joined: Tue Oct 15, 2002 8:23 am
Re: Screws for the front plate (GoLowDrew)
It's the same bolts for the rear plate. Just bring those with you.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Or if you want to avoid the dealer..take one of the screws out of the rear plate, and go to a Lowes or Home Depot.. They should be able to match it up pretty easily.
2003 Vibe GT Lava"He inched his way up the corridor as if he would rather be yarding his way down it.""For a moment, nothing happened. Then, after a second or so, nothing continued to happen." - Douglas Adams...we all miss you
Re: (Jahntassa)
when i had my front plate on i had to go ot autozone and get little screws with wedge in plastic things
'03 VIBE AWDPioneer AVIC-N1MOMO 6.5" componets in frontMOMO 6.5" speakers in rearJL e6450 six channel ampJL 12" w3 subAlpine 120W amp powering the sub