two tone to mono

Body kits, spoilers, lights, and anything on the exterior of the vehicle
Post Reply
XMan037
Posts: 9
Joined: Tue Jun 15, 2004 3:33 am

two tone to mono

Post by XMan037 »

anyone out there change their grey plastic fenders with the monochrome package? If so...how much did it cost you? I know that this is an option for $300 when you buy from a dealer. Just wondering if it can be done aftermarket. XMan037
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: two tone to mono (XMan037)

Post by ragingfish »

Just paint them.That gray plastic is the exact same plastic under the paint of factory monotones. It just gets painted to match.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
savedbyzero
Posts: 1066
Joined: Mon Apr 15, 2002 7:15 am

Re: two tone to mono (ragingfish)

Post by savedbyzero »

You need a felx additive and the plastic has to be baked, I beleive for it to hold. It cost me $300 to get my rear bumper done.
THIS IS WHAT I DO...http://www.studiothisis.com
XMan037
Posts: 9
Joined: Tue Jun 15, 2004 3:33 am

Re: two tone to mono (savedbyzero)

Post by XMan037 »

I dont know if I trust getting them painted. I guess Id have to make some calls to body shops about it. But...if you can buy from the dealer for around the same price, I would just get them replaced. Does anyone out there know how much it costs for dealer replacement or a paint job on the entire sha-bang?
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Re: two tone to mono (XMan037)

Post by AKLGT »

paint jobs are like most things: quality vs cheapif you want a good quality paint job, it's gonna cost some $$$$if you want cheap, go to MAACO
AKLGT1998 Subaru 2.5RS
XMan037
Posts: 9
Joined: Tue Jun 15, 2004 3:33 am

Re: two tone to mono (trdvibe)

Post by XMan037 »

lol..Id rather order the parts already painted. Paint jobs never match the original factory paint anyway. Im sure someone out there has replaced them. I cant throw on the sport package until I do this!
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: two tone to mono (XMan037)

Post by ragingfish »

When you order the parts, they come unpainted, known as "paint to match."They'd still have to be painted at a dealer. No sense in doing that.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Mr. Poopypants
Posts: 3428
Joined: Mon Nov 18, 2002 11:59 pm

Re: two tone to mono (XMan037)

Post by Mr. Poopypants »

I have wanted to do this for a long time now, but I want it to look good, not an Earl Shibe (sp?) or MAACO job.
A bartender is just a pharmacist with a limited inventory.
XMan037
Posts: 9
Joined: Tue Jun 15, 2004 3:33 am

Re: two tone to mono (Mr. Poopypants)

Post by XMan037 »

hmmmmmmm......I was under the assumption that the parts were already painted, like the sport package. If thats not the case, then who has gotten theirs painted? And how does it look? And how much did it cost? If the option costs $300 at the dealer, I wonder how much they would charge to paint the existing ones?
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: two tone to mono (XMan037)

Post by ragingfish »

Sports package only comes pre-painted in select colors:Salsa, Abyss, and Satellite.All other colors would come primed, but again, needed to be painted by the dealer.I sense that you'll likely be paying more than $300 to have them painted outside the factory.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Re: two tone to mono (ragingfish)

Post by AKLGT »

even if they come prepainted from the factory, they are not guaranteed to match perfectly. that's why most good bodyshops will want you to bring the car in so they can color match.
AKLGT1998 Subaru 2.5RS
User avatar
ColonelPanic
Posts: 8435
Joined: Sun Jan 05, 2003 8:48 am
Location: South Central Indiana

Re: two tone to mono (XMan037)

Post by ColonelPanic »

Definitely can be done, but it'll cost ya. I've wondered how a Vibe would look with cladding painted, but in a different color than the body... For instance, my Neptune vibe with satellite cladding... hmm
03 Vibe base. Born 10/14/2002 06:07 AM
Auto, Moon & Tunes, power package. 143k
Neptune/dying clearcoat/primer grey. :lol:

Image

'21 Elantra Limited - 2.0L/IVT
'15 Escape SE - 1.6L EcoBoost (hers)
Image Image
XMan037
Posts: 9
Joined: Tue Jun 15, 2004 3:33 am

Re: two tone to mono (ColonelPanic)

Post by XMan037 »

LOL...I think I know what you are getting at. Too bad my Vibe wasnt Neptune so you could find out......:-)
shibaman
Posts: 329
Joined: Sun Jul 07, 2002 7:14 pm

Re: two tone to mono (XMan037)

Post by shibaman »

I have always have thought about painting my cladding to match the Salsa color of my car until I saw a mono tone Salsa at a dealer last week. Pretty, but kind of boring. I like my 2 tone with 04 cldding better. Looks more sporty!

Attached files
Salsa basemoons and tunesInjen CAIHotchkis sway barsHotchkis springsCenterline RPM sMagnaflow muffler,stainless tipDevlop's custom STB
Post Reply