lowering questions...

Handling, suspension, and brake tuning discussions
Post Reply
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

lowering questions...

Post by vibe_raider »

I want to get lowering springs for my vibe, but their is so much wheel gap i'm not sure a 1.5" drop is going to make much of a difference. I'd still like to have a decent ride, so i probably dont want coilovers ... what would u guys suggest?
My other ride is a ...
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: lowering questions... (vibe_raider)

Post by wicked1981 »

Quote, originally posted by vibe_raider »I want to get lowering springs for my vibe, but their is so much wheel gap i'm not sure a 1.5" drop is going to make much of a difference. I'd still like to have a decent ride, so i probably dont want coilovers ... what would u guys suggest?Look at these. There is even a customer comment from a Matrix XRS that installed on car. Note: Avg low 1.8"F 2.1"Rhttp://www.tirerack.com/suspen....7282
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (wicked1981)

Post by vibe_raider »

thanks. that's cool. but yea, like it said "you may wish your ride was lower" ... hmm, which is my problem. i'm worried i'm gonna spend 150 bucks on springs and not be able to tell big enough of a differance. what do u have on ur car and are you happy w/ it?
My other ride is a ...
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: lowering questions... (vibe_raider)

Post by wicked1981 »

Actually havent purchased any yet. I know that there is some that will drop your car like 2-2.5" thats a nice drop I just cant find them right now. Ill keep looking I know I seen them.
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (wicked1981)

Post by vibe_raider »

yea, i've been looking around on ebay for a while trying to find a good deal on some for a while. the lowest i've seen is 2.25", which isnt bad, but it was 1" to 2.25" and it was some weird brand i'd never heard of *lol*
My other ride is a ...
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: lowering questions... (vibe_raider)

Post by ragingfish »

Tein S.Tech springs will give you a 2" ballpark drop...a little over 2" per wheel actually...I paid $100 for mine used...but I've heard of people getting them for not too much more than that new...
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (ragingfish)

Post by vibe_raider »

Quote, originally posted by ragingfish »Tein S.Tech springs will give you a 2" ballpark drop...a little over 2" per wheel actually...I paid $100 for mine used...but I've heard of people getting them for not too much more than that new...cool, were u happy w/ how much it dropped it?
My other ride is a ...
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: lowering questions... (vibe_raider)

Post by ragingfish »

Havne't had them put in yet...got them last September, they will FINALLY go in next month...Pretty sure AtWork has the same ones, and a few others, haven't ever heard bad stuff about 'em.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: lowering questions... (ragingfish)

Post by wicked1981 »

found them for $123.50 newhttp://optionimports.com/teslospfor208.html
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (wicked1981)

Post by vibe_raider »

Quote, originally posted by wicked1981 »found them for $123.50 newhttp://optionimports.com/teslospfor208.htmlthat is awesome! That's actually cheaper than anything I could find on ebay w/ that much drop including shipping and handling thanks! i'm gonna shop around a little bit first, but i might just go for those *heh*
My other ride is a ...
scherry2
Posts: 4073
Joined: Wed Mar 26, 2003 8:02 am

Re: lowering questions... (ragingfish)

Post by scherry2 »

I have tein springs.2.25 drop front and rearhandles great ride is a little rougher than stock. I put them in in my drivewaythere is a pic on the link below
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (scherry2)

Post by vibe_raider »

that looks nice! hmm, still not sure it's quite as low as i wanted... i should just cut a coil off mine,. yea! that'd be ghetto fab! *(removed)*
My other ride is a ...
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: lowering questions... (vibe_raider)

Post by ragingfish »

Don't freely cut coils...it's just noit smart...could lead to more problems...If you want to go any lower than that, I believe coilovers will bring you down about 3...but be ready to shell out massive cash...I believe I heard in the 1000+ range, but I could be wrong.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (ragingfish)

Post by vibe_raider »

lol! yea, i was being very very sarcastic about cutting them. but i might go w/ coilovers. I have 4k to spend on my "summer car project" ... but daaang, i'm not sure if i'm willing to spend THAT much on them *hah*
My other ride is a ...
savedbyzero
Posts: 1066
Joined: Mon Apr 15, 2002 7:15 am

Re: lowering questions... (vibe_raider)

Post by savedbyzero »

What size rim/tire combo are you running? This will also determine how much wheel gap you have after lowering it. I have the stock 17's (as of now, HINT,HINT, CLUE,CLUE!) with the Eibach sportline springs. I can squeeze 2 fingers between the outside fender and the tire. Not much gap at all! i like the fender to hug the tire evenly all the way around, noy look like it's sitting on top of the tire.The ride is great. My wife can hardly tell the difference. This says a lot!
THIS IS WHAT I DO...http://www.studiothisis.com
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: lowering questions... (vibe_raider)

Post by wicked1981 »

Quote, originally posted by vibe_raider »lol! yea, i was being very very sarcastic about cutting them. but i might go w/ coilovers. I have 4k to spend on my "summer car project" ... but daaang, i'm not sure if i'm willing to spend THAT much on them *hah*4K???? Sounds like a turbo is spooling......
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
User avatar
ZubenElGenubi
Posts: 2197
Joined: Thu Apr 22, 2004 6:22 am

Re: lowering questions... (wicked1981)

Post by ZubenElGenubi »

You can get the Tein S-Tech for less on Ebay...$99!:http://cgi.ebay.com/ebaymotors...35075
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (savedbyzero)

Post by vibe_raider »

Quote, originally posted by savedbyzero »What size rim/tire combo are you running? This will also determine how much wheel gap you have after lowering it. I have the stock 17's (as of now, HINT,HINT, CLUE,CLUE!) with the Eibach sportline springs. I can squeeze 2 fingers between the outside fender and the tire. Not much gap at all! i like the fender to hug the tire evenly all the way around, noy look like it's sitting on top of the tire.The ride is great. My wife can hardly tell the difference. This says a lot!right now i've just got stock 16"(eew, wheel covers) but i'm going to "invest" in some 18" gunmetal rims here soon
My other ride is a ...
satur9
Posts: 1127
Joined: Sat Feb 01, 2003 2:42 am

Re: lowering questions... (vibe_raider)

Post by satur9 »

you can get sleeve over coilovers like skunk2 (for the matrix) for like 300 bucks .
look my sniggies, i had a strizz-oke in my brizz-ain okay,you know what im saying. so i cant move all good. but thanks for mentioning that .thank you very much.athf4evr. click here! you know you want to!!!
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: lowering questions... (wicked1981)

Post by ragingfish »

Quote, originally posted by wicked1981 »4K???? Sounds like a turbo is spooling...... Seriously!If you've got 4K at your disposal, your first mod should be SUPERCHARGER, without even a second thought!
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (ragingfish)

Post by vibe_raider »

Quote, originally posted by ragingfish »Seriously!If you've got 4K at your disposal, your first mod should be SUPERCHARGER, without even a second thought! yea? I know absolutely NOTHING about the supercharger for the vibe. how much more power does it give me and how much is it?
My other ride is a ...
wicked1981
Posts: 1552
Joined: Fri Oct 31, 2003 6:15 am

Re: lowering questions... (vibe_raider)

Post by wicked1981 »

I think with this Turbo you will be at around 200hp maybe more here is the link.http://www.staffordfabrication...u=305With the GM (TRD) supercharger you are looking at around 180hp. If you buy this from GM it will be same price as the turbo so turbo would be best way but if you buy it from toyota do thishttp://forums.genvibe.com/zerothread?id=9588if not GM's link is herehttp://www.gmgoodwrench.com/gm...on=pp
2006 Pontiac G6 GTP3.9L V-6 240hp and 241 lb-ft or torque18" Aluminum, five-spoke, flangeless200 Watt, 8 speaker Monsoon sysChrome dual exhaust tipsLiquid Silver MetallicBorla Custom ExhaustDr. Speed Cold Air Intake
noginsk
Posts: 287
Joined: Wed Dec 24, 2003 2:43 pm

Re: lowering questions... (satur9)

Post by noginsk »

Quote, originally posted by satur9 »you can get sleeve over coilovers like skunk2 (for the matrix) for like 300 bucks .I'm curious, what is a sleeve coilover?
MattB.2004 Salsa base5 speedPower package NOW BELONGS TO EX-WIFE Looking at a new car, maybe a Scion tC or a Mazda 3 hatchback ------Give me a Vote on what you think I should get!: ----------- http://forums.genvibe.com/zerothread?id=11808
vibe_raider
Posts: 156
Joined: Fri Jan 23, 2004 11:45 am

Re: lowering questions... (noginsk)

Post by vibe_raider »

Quote, originally posted by noginsk »I'm curious, what is a sleeve coilover?...???
My other ride is a ...
Post Reply