Tein's just installed!!!!

Handling, suspension, and brake tuning discussions
Post Reply
viberator
Posts: 8
Joined: Wed Oct 29, 2003 8:15 am

Tein's just installed!!!!

Post by viberator »

Hey everybody!!!! I just wanted to thank all of you for posting such informative opinions on the topic of suspension!!! It really helped me out in my final decision to buy the right springs for me. I went w/ the Tein's for the fact that everyone that had them were satisfied and that Tein specializes in only a few Japanese makes, so i figured they really knew what they were doing. At first the drop specified seemed a bit much, but much to my surprise it was just right! The ride is smooth and the car looks great!!!! Thanks again to all of you who posted!!!

Attached files
18x8.5 inch Bronze Falken Hanabi Rims, 235/40/18 Falken Ziex Tires, Factory upgraded front spoiler, AEM short ram intake,DC sports ceramic coated headers, magnaflow high-flow catalytic converter, Greddy 2.5 inch axle-back exhaust and midpipe,Tein S-Tech lowering springs, Progress rear anti-sway bar,DC sports Carbon Steel series twin bar strut tower brace, Fidanza flywheel, Spec stage 2 kevlar full disc clutch,Speed Source Brass Shifter-link bushings
NSimkins
Global Moderator
Posts: 3091
Joined: Sat Jun 08, 2002 5:43 am

Re: Tein's just installed!!!! (viberator)

Post by NSimkins »

Looks great! I currently have the Eibach Pro Kit springs but I am considering switching to the Tein's next year sometime to get a little more drop.Are these the Tein High.Tech or S.Tech springs?
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Tein's just installed!!!! (NSimkins)

Post by ragingfish »

One of these days I'll get my Tein's put on...
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Sub-Vibe-R
Posts: 2093
Joined: Tue Aug 27, 2002 12:30 am

Re: Tein's just installed!!!! (ragingfish)

Post by Sub-Vibe-R »

Looks very nice Good to see another satisfy Tein owner
viberator
Posts: 8
Joined: Wed Oct 29, 2003 8:15 am

Re: Tein's just installed!!!! (NSimkins)

Post by viberator »

These are the S. Techs, I was also considering the Eibach sport lines before I bought these, but I read in a similar forum somebody mentioning that if you just drop 1-2 inches it makes the Vibe look like a normal car. People would not notice that it was lowered unless compared side by side with another vibe/matrix. So I went with the lowest I could find (for springs, I an not considering coilovers just yet)!!! The only thing is that these did not come with the silencer sleeves (i bought on ebay), but I really don't notice any noises to the point that sleeves would make a difference. One thing that I HAVE to say is that I have never had so much fun (in a car) going around corners and not having the entire car tilt!!! Handling is incredible!!! Anyways, here is a pic of my rear wheel *notice the green springs within the spokes!

Attached files
18x8.5 inch Bronze Falken Hanabi Rims, 235/40/18 Falken Ziex Tires, Factory upgraded front spoiler, AEM short ram intake,DC sports ceramic coated headers, magnaflow high-flow catalytic converter, Greddy 2.5 inch axle-back exhaust and midpipe,Tein S-Tech lowering springs, Progress rear anti-sway bar,DC sports Carbon Steel series twin bar strut tower brace, Fidanza flywheel, Spec stage 2 kevlar full disc clutch,Speed Source Brass Shifter-link bushings
scherry2
Posts: 4073
Joined: Wed Mar 26, 2003 8:02 am

Re: Tein's just installed!!!! (viberator)

Post by scherry2 »

That looks real cool!! are those the stock 16"s? they looks great!!!I gotta get my springs on........
rasermon
Posts: 2156
Joined: Mon Jul 29, 2002 10:07 am

Re: Tein's just installed!!!! (viberator)

Post by rasermon »

Sweet looking drop.
Satellite 03 GT Retirement ----> Moderator for Genvibe.com 2002 - 2007 A fact of life: After Monday and Tuesday even the calendar says (removed)
viberator
Posts: 8
Joined: Wed Oct 29, 2003 8:15 am

Re: Tein's just installed!!!! (scherry2)

Post by viberator »

No, these are the stock 17's
18x8.5 inch Bronze Falken Hanabi Rims, 235/40/18 Falken Ziex Tires, Factory upgraded front spoiler, AEM short ram intake,DC sports ceramic coated headers, magnaflow high-flow catalytic converter, Greddy 2.5 inch axle-back exhaust and midpipe,Tein S-Tech lowering springs, Progress rear anti-sway bar,DC sports Carbon Steel series twin bar strut tower brace, Fidanza flywheel, Spec stage 2 kevlar full disc clutch,Speed Source Brass Shifter-link bushings
viberator
Posts: 8
Joined: Wed Oct 29, 2003 8:15 am

Re: Tein's just installed!!!! (viberator)

Post by viberator »

Hey, I know this is completely off topic, but does anybody know of a company that manufactures aftermarket mesh grills for the vibe??? at least any that fit into the factory (holes, screws, etc)... i cannot find anybody that does not have to custom make the grill and then you have to "glue" it yourself... i guess thats not a bad thing, but i would rather have something (like the TRD grill), that fits right in. TRD made an amazing grill for I believe the 4-runner or the SUV that starts with a "T" (i cannot remember the name), but it is just one big piece and its completely wire mesh... Its BEAUTIFUL!!! i put one together myself, but the origional grill is still there (i put it over the origional)... i want something more professional and better looking!!! any comments or suggestions would be greatly appreciated!!! btw. sorry for the long offtopic post

Attached files
18x8.5 inch Bronze Falken Hanabi Rims, 235/40/18 Falken Ziex Tires, Factory upgraded front spoiler, AEM short ram intake,DC sports ceramic coated headers, magnaflow high-flow catalytic converter, Greddy 2.5 inch axle-back exhaust and midpipe,Tein S-Tech lowering springs, Progress rear anti-sway bar,DC sports Carbon Steel series twin bar strut tower brace, Fidanza flywheel, Spec stage 2 kevlar full disc clutch,Speed Source Brass Shifter-link bushings
viberator
Posts: 8
Joined: Wed Oct 29, 2003 8:15 am

Re: Tein's just installed!!!! (viberator)

Post by viberator »

another view

Attached files
18x8.5 inch Bronze Falken Hanabi Rims, 235/40/18 Falken Ziex Tires, Factory upgraded front spoiler, AEM short ram intake,DC sports ceramic coated headers, magnaflow high-flow catalytic converter, Greddy 2.5 inch axle-back exhaust and midpipe,Tein S-Tech lowering springs, Progress rear anti-sway bar,DC sports Carbon Steel series twin bar strut tower brace, Fidanza flywheel, Spec stage 2 kevlar full disc clutch,Speed Source Brass Shifter-link bushings
Post Reply