Just ordered from grafxwerx, need install tips

[oolunchbox]

I just sent out my order to ryan for 3 bordered vibe decals, a bordered arrowhead adn the 3rd breaklight decal. I'm going to debadge my vibe adn replace with the bordered decals but i'm looking for any advice anyone has to offer. ive read all the threads about debadging and seen 2 or 3 methods. I'm wondering which is the best the fishline/ floss or the hairdryer methos, i want to do this as cleanly and easily as possible. also if anyone has experience with the inside mount 3rd breaklight decal, do you have any tips for installing it?thanksLuNCH

[ArcsVibe]

Ryan will send you instructions along with your purchase. They are real easy to install you will see. If you have any questions you can always email him or ask away.It did not take me much time to put them on my Vibe, just a few minutes and I really like them

[GrafxWerks]

First off, before you remove the factory badges, you should mark their location with tape since you plan to install the bordered replacements. This will ensure you get the replacements installed straight and true.I personally recommend shaving the badges with fishing line (20lb test works excellent). To remove the remaining foam tape, the technique that has worked best for me is to carefully peel up a corner with your fingernail and, holding it parallel to the body of the car, stretch it in the opposite direction. If you do this slowly and carefully, the foam and adhesive will come off in one piece leaving no goo behind.Any remaining goo can be cleaned up with some rubbing alcohol or gasoline (I've stopped recommending Goo-Gone as I've heard of a few discoloration issues, although I have never experienced this myself).As for application, as mentioned, detailed instructions are included.- RyanGrafxWerks

[oolunchbox]

Excellent, thanks ryan that is exactly what i was looking for. ill be sure to try to follow your tips exactly and i'll post pics when everything is done.ThanksLuNCH

[drunkenmaxx]

so, what exactly do you do with the fishing line? just get in between the two and pull?

[GrafxWerks]

No, you hold the fishing line and "saw" back and forth behind the badge until you slice through all the foam tape and the badge falls off.- Ryan

[scherry2]

are you the one that wanted the overlays the same color as the car? if so it will look great!! just take your time and listen to ryan.oh' hi ryan hows it going?

[oolunchbox]

yeah i wanted to get them the same color as my vibe but i went with ryans suggestion of getting them bordered with reflective black, im thinkin they'll still look great though.I just sent my order out today so now i have to wait and that's killin me, i cant wait to get them on to see how they look. i hope the canadian and us postoffices can play nice and get me my stuff quick... as i said ill post pics when theyre on.

[scherry2]

they will I had mine in a week

[GrafxWerks]

Quote, originally posted by scherry2 »oh' hi ryan hows it going?All good Sheldon, thanks! If there's something else you guys are looking for (decal wise) for the Vibe, let me know (just shoot me an e-mail)!- RyanGrafxWerks