Parting out an 03 GT 250km

thebarber · Post by **thebarber** » Wed Dec 30, 2015 10:33 am

Items SOLD/spoken for for:

Engine
ECU
Headlights
A/C compressor
Spare/Jack
CROSS BARS
alternator
lower grills
upper grills
plastic rocker skirts
shift knob
gauge cluster
c60 transmission
head unit
vsv
Steering wheel

many things available:
16" alloys (tires are kind of garbage)
interior trim
air bags
air bag front seats
moonroof
Body cladding

JUST ASK FOR PARTS/PRICES!

Parts located in Kitchener/Waterloo/Cambridge (Ontario, Canada) area

Comda901 · Post by **Comda901** » Wed Dec 30, 2015 12:00 pm

Greetings! I was wondering how much you'd like for that front right fog light. Mines cracked. I would appreciate the entire assembly.

mktrat · Post by **mktrat** » Thu Dec 31, 2015 5:59 am

Any thoughts on the roof rails?

B14CK_H4WK · Post by **B14CK_H4WK** » Thu Dec 31, 2015 12:23 pm

I would like to buy both rocker panels, both driver and passenger side

Comda901 · Post by **Comda901** » Thu Dec 31, 2015 12:34 pm

Hey,

I sent you a message but received no response. so just to put it in the list here, im also wondering what you want for that Radio deck and does it have a trunk cover in the back. If the radio works please give me a price. And i will take those fog lights. PM me on facebook please to let me know where these items are located and where i can meet you. Thanks

thebarber · Post by **thebarber** » Sat Jan 02, 2016 4:18 am

Comda901 wrote:Hey,

I sent you a message but received no response. so just to put it in the list here, im also wondering what you want for that Radio deck and does it have a trunk cover in the back. If the radio works please give me a price. And i will take those fog lights. PM me on facebook please to let me know where these items are located and where i can meet you. Thanks

I have a hard cover for the trunk, $50

Fogs are aftermarket, $10/pair

HU is a pioneer wired for a vibe, $120

I still need to pull the parts

thebarber · Post by **thebarber** » Sat Jan 02, 2016 4:19 am

mktrat wrote:Any thoughts on the roof rails?

$50 (Canadian) for the cross bars +shipping

thebarber · Post by **thebarber** » Sat Jan 02, 2016 4:22 am

B14CK_H4WK wrote:I would like to buy both rocker panels, both driver and passenger side

$100cad for the pair plus shipping

Comda901 · Post by **Comda901** » Sat Jan 02, 2016 11:09 am

thebarber wrote:
Comda901 wrote:Hey,

I sent you a message but received no response. so just to put it in the list here, im also wondering what you want for that Radio deck and does it have a trunk cover in the back. If the radio works please give me a price. And i will take those fog lights. PM me on facebook please to let me know where these items are located and where i can meet you. Thanks
I have a hard cover for the trunk, $50

Fogs are aftermarket, $10/pair

HU is a pioneer wired for a vibe, $120

I still need to pull the parts

I will gladly take the Fog lights, however for that price HU no thanks. New Pioneer adverts them $150 and Amazon is asking the same price ($120) and thats with everything included radio, mic, remote etc. So Unless you can offer me something better im going to pass. Thanks

thebarber · Post by **thebarber** » Sat Jan 02, 2016 12:10 pm

Comda901 wrote:
thebarber wrote:
Comda901 wrote:Hey,

I sent you a message but received no response. so just to put it in the list here, im also wondering what you want for that Radio deck and does it have a trunk cover in the back. If the radio works please give me a price. And i will take those fog lights. PM me on facebook please to let me know where these items are located and where i can meet you. Thanks
I have a hard cover for the trunk, $50

Fogs are aftermarket, $10/pair

HU is a pioneer wired for a vibe, $120

I still need to pull the parts
I will gladly take the Fog lights, however for that price HU no thanks. New Pioneer adverts them $150 and Amazon is asking the same price ($120) and thats with everything included radio, mic, remote etc. So Unless you can offer me something better im going to pass. Thanks

Does the fact that that's Canadian funds make a difference? It has the remote, brackets, etc. It'd be plug n play

handmedown03 · Post by **handmedown03** » Sat Jan 02, 2016 7:46 pm

Interested in the steering wheel if nice and leather and airbag if the emblem is nice. Don't know if you would want to sell it this way but I am interested in the tailpipe if it is the same as a base and factory stainless. Looking to do a muffler swap to a old style camaro with single inlet and dual outlet.Don't need the muffler, just everything after that. Also need the rear sill plate inside the hatch if nice and unbroken. Havent had time to check into it but are the GT sway bars bigger than the base? Interested in those if they are. I also need one dash blank filler for the space beside hatch release. Shipping would be to Illinois.
Parts interested in-
GT steering wheel
emblem in center or complete center
taipipe
rear sill plate
sway bars if larger than base
rear door panels
automatic gt shift knob
dash blank beside hatch release
rear hatch cover if nice

mktrat · Post by **mktrat** » Mon Jan 04, 2016 7:47 am

thebarber wrote:
mktrat wrote:Any thoughts on the roof rails?
$50 (Canadian) for the cross bars +shipping

Any idea what shipping would be to US Zip 48072?

thebarber · Post by **thebarber** » Tue Jan 05, 2016 7:51 am

mktrat wrote:
thebarber wrote:
mktrat wrote:Any thoughts on the roof rails?
$50 (Canadian) for the cross bars +shipping

Any idea what shipping would be to US Zip 48072?

im guesstimating sizes, but about $32CAD - - $23usd

thebarber · Post by **thebarber** » Tue Jan 05, 2016 7:52 am

to all interested. im not going to be able to pull parts this week (jan4-8) but im hoping to get out there one evening next week to rip the car apart

if you want parts, PM me a list. i'll make sure theyre off and get you a very fair price (remember im in canada and the exchange rate is VERY favorable for americans right now...)

Lancer521 · Post by **Lancer521** » Tue Jan 05, 2016 9:04 am

I'd be interested in the front and rear Pontiac badge if they're not worn out. It's hard to tell from the pics. How much for each seperately and together?

oldelpaseo · Post by **oldelpaseo** » Tue Jan 05, 2016 8:21 pm

Auto or 6spd ? Id be interested in the 6spd tranny to replace my 5spd.
I could check for shipping cost or maybe pick it up myself.

Thanks

B14CK_H4WK · Post by **B14CK_H4WK** » Tue Jan 05, 2016 8:25 pm

thebarber wrote:to all interested. im not going to be able to pull parts this week (jan4-8) but im hoping to get out there one evening next week to rip the car apart

if you want parts, PM me a list. i'll make sure theyre off and get you a very fair price (remember im in canada and the exchange rate is VERY favorable for americans right now...)

ok cool just let us know when you do pull the parts. Ill paypal you asap. Thank you!!

thebarber · Post by **thebarber** » Wed Jan 06, 2016 7:15 am

Lancer521 wrote:I'd be interested in the front and rear Pontiac badge if they're not worn out. It's hard to tell from the pics. How much for each separately and together?

i have the vibe/Pontiac logos from my current vibe available in decent shape if you're interested....how many sets did you want? i'll let them go cheap

Lancer521 · Post by **Lancer521** » Wed Jan 06, 2016 12:26 pm

thebarber wrote: i have the vibe/Pontiac logos from my current vibe available in decent shape if you're interested....how many sets did you want? i'll let them go cheap

I mainly just need one rear pontiac logo, but I'd take one front for good measure. How much would you want for them? Could you send me pics?

455SD · Post by **455SD** » Wed Jan 06, 2016 4:06 pm

Hi,

Interested in console mounted, upper armrest/lid (needs to be in in good condition) - not the whole console

Tweeters for both front doors
Cigarette lighter/power outlet & cover, from inside the console
Lower screens in front bumper, both L & R
Small plastic cover for the rear wiper arm. It snaps on over the fastening nut.
Trim & power button/120 outlet that is mounted below the a/c controls - again, if in good shape.

Thanks

25271 is my ZIP

SirLinux · Post by **SirLinux** » Thu Jan 07, 2016 8:59 pm

I would like to know if I could get the dash cluster if available? The dealership working on my GT with the ongoing idle problem informed me today that they noticed the dash cluster back lighting wasn't coming on. They swear nothing they worked on would have made it go out. They recommend replacing it of course. Perhaps a bad connection but I need to be prepared for worst case.

A Canuck in Kansas.
Thanks
zip 66217

thebarber · Post by **thebarber** » Tue Jan 12, 2016 3:31 am

oldelpaseo wrote:Auto or 6spd ? Id be interested in the 6spd tranny to replace my 5spd.
I could check for shipping cost or maybe pick it up myself.

Thanks

its a manual

shipping might have to be via greyhound due to weight....

thebarber · Post by **thebarber** » Tue Jan 12, 2016 3:38 am

455SD wrote:Hi,

Interested in console mounted, upper armrest/lid (needs to be in in good condition) - not the whole console
Tweeters for both front doors
Cigarette lighter/power outlet & cover, from inside the console
Lower screens in front bumper, both L & R
Small plastic cover for the rear wiper arm. It snaps on over the fastening nut.
Trim & power button/120 outlet that is mounted below the a/c controls - again, if in good shape.

Thanks

25271 is my ZIP

im actually taking the tweeters and the dc plug as mine are absent/not working respectively. if i don't ahve the factory plug for the tweeters, ill sell them

someone else wants teh lower grills

console lid is in decent shape

but if you want the ac outlet, console lid and wiper arm plastic....shipping is about $40CAD (28USD) for a box thatll hold the pieces. is there anything else that you might want?

thebarber · Post by **thebarber** » Tue Jan 12, 2016 3:41 am

SirLinux wrote:I would like to know if I could get the dash cluster if available? The dealership working on my GT with the ongoing idle problem informed me today that they noticed the dash cluster back lighting wasn't coming on. They swear nothing they worked on would have made it go out. They recommend replacing it of course. Perhaps a bad connection but I need to be prepared for worst case.

A Canuck in Kansas.
Thanks
zip 66217

hows 60usd to your door?

thebarber · Post by **thebarber** » Tue Jan 12, 2016 6:59 am

CROSS RAILS SOLD

thebarber · Post by **thebarber** » Tue Jan 12, 2016 7:31 am

pics i for some reason didnt post earlier...

parting out a 2003 vibe gt

253104km on the car

c60 transmission

$500CAD

pickup in cambridge, ontario

*still currently IN the car, but should be out by the end of the month

the car:

mktrat · Post by **mktrat** » Tue Jan 12, 2016 8:20 am

So is it considered bad form if I am bouncing up and down in my desk chair (totally acting like a little kid) because I finally found a reasonably priced set of cross bars for my vibe?!?!?!?!

Thanks thebarber!!!

thebarber · Post by **thebarber** » Thu Jan 14, 2016 7:56 am

list updated

ken99287 · Post by **ken99287** » Thu Jan 14, 2016 7:02 pm

Interested in the steering wheel and the head unit

15301

Thanks

455SD · Post by **455SD** » Sat Jan 16, 2016 8:50 am

console lid is in decent shape

but if you want the ac outlet, console lid and wiper arm plastic....shipping is about $40CAD (28USD) for a box thatll hold the pieces. is there anything else that you might want?

When you say "decent shape" for the 2 piece console lid, what are the imperfections? Hinge & mounting points in good shape? Exterior surfaces not scarred?

I am also interested in the hood prop rod insert, plastic insert that goes into the RF fender, not the complete rod.

Please let me know total price (parts + shipping) on what is mentioned above.

Interested in the rims - but I'm afraid shipping costs alone would be prohibitive.

Thanks

thebarber · Post by **thebarber** » Sat Jan 16, 2016 6:27 pm

ken99287 wrote:Interested in the steering wheel and the head unit

15301

Thanks

HU is sold

Wheel is $120cad shipped

thebarber · Post by **thebarber** » Sat Jan 16, 2016 6:29 pm

Parts wrapped up for shipping

Sorry for the delay, folks

sk8r78 · Post by **sk8r78** » Sun Jan 17, 2016 7:41 am

Do you have and what do you want for the outside temperature sensor, that is on the front of the radiator core support. I need both halves of the connectors and maybe a couple inches of the wires after the connection to tie back in with. Lemme know. Thanx Chuck

thebarber · Post by **thebarber** » Tue Jan 19, 2016 7:12 am

got all the packages out and tracking info sent via PM to the buyers

sk8r78 wrote:Do you have and what do you want for the outside temperature sensor, that is on the front of the radiator core support. I need both halves of the connectors and maybe a couple inches of the wires after the connection to tie back in with. Lemme know. Thanx Chuck

hows $20usd to your door?

sk8r78 · Post by **sk8r78** » Tue Jan 19, 2016 8:23 pm

thebarber wrote:got all the packages out and tracking info sent via PM to the buyers

sk8r78 wrote:Do you have and what do you want for the outside temperature sensor, that is on the front of the radiator core support. I need both halves of the connectors and maybe a couple inches of the wires after the connection to tie back in with. Lemme know. Thanx Chuck
hows $20usd to your door?

Sounds good, how do you want paid ?

handmedown03 · Post by **handmedown03** » Tue Jan 19, 2016 10:41 pm

Want to buy the steering wheel if not sold. Would also like to buy 1 of the switch fillers by the hatch release.

B14CK_H4WK · Post by **B14CK_H4WK** » Wed Jan 20, 2016 1:22 am

thank you!!!!!!!!!!!!!!!!!!

thebarber · Post by **thebarber** » Wed Jan 20, 2016 4:32 am

handmedown03 wrote:Want to buy the steering wheel if not sold. Would also like to buy 1 of the switch fillers by the hatch release.

How's $100usd to your door?

handmedown03 · Post by **handmedown03** » Wed Jan 20, 2016 11:26 am

If that is for the center also, I will take it. Pm me paypal info and I will take care of it when I get home tonight. Thanks.

SirLinux · Post by **SirLinux** » Wed Jan 20, 2016 7:50 pm

thebarber wrote:
SirLinux wrote:I would like to know if I could get the dash cluster if available? The dealership working on my GT with the ongoing idle problem informed me today that they noticed the dash cluster back lighting wasn't coming on. They swear nothing they worked on would have made it go out. They recommend replacing it of course. Perhaps a bad connection but I need to be prepared for worst case.

A Canuck in Kansas.
Thanks
zip 66217
hows 60usd to your door?

The cluster came back on after driving it a while. Well most of it anyway. No fuel or temperature gauge reading so I am thinking it is a connection issue somewhere so won't be needing the cluster after all.

Is the glove box door spoken for? I really only need the handle assembly but if it is easier to pull off the door what are you wanting?

Thanks

thebarber · Post by **thebarber** » Thu Jan 21, 2016 6:50 am

SirLinux wrote:
thebarber wrote:
SirLinux wrote:I would like to know if I could get the dash cluster if available? The dealership working on my GT with the ongoing idle problem informed me today that they noticed the dash cluster back lighting wasn't coming on. They swear nothing they worked on would have made it go out. They recommend replacing it of course. Perhaps a bad connection but I need to be prepared for worst case.

A Canuck in Kansas.
Thanks
zip 66217
hows 60usd to your door?
The cluster came back on after driving it a while. Well most of it anyway. No fuel or temperature gauge reading so I am thinking it is a connection issue somewhere so won't be needing the cluster after all.

Is the glove box door spoken for? I really only need the handle assembly but if it is easier to pull off the door what are you wanting?

Thanks

i have the glovebox...im assuming the handle comes apart relatively easily?

shipping the whole glovebox would be expensive. but if they handle comes apart nice, i could do $25usd for the handle shipped

thebarber · Post by **thebarber** » Tue Jan 26, 2016 4:16 am

anyone else need anything/did i forget to get back to someone?

thebarber · Post by **thebarber** » Thu Jan 28, 2016 10:47 am

Drich79 · Post by **Drich79** » Mon Feb 01, 2016 9:11 am

How about the drivers window switch assembly? I dont really need the switches, just the silver plastic piece that surrounds the switches. As long as the mounting tabs are in good shape.
Shipping to 68107

jayoldschool · Post by **jayoldschool** » Mon Feb 01, 2016 2:57 pm

Got my shipment, thank you!

handmedown03 · Post by **handmedown03** » Mon Feb 01, 2016 3:34 pm

I will take the steering wheel. Never heard back from you.

thebarber · Post by **thebarber** » Mon Feb 01, 2016 5:59 pm

handmedown03 wrote:I will take the steering wheel. Never heard back from you.

$100 USD to your door....as posted above

handmedown03 · Post by **handmedown03** » Mon Feb 01, 2016 6:41 pm

Please pm me your info. I actually thought I sent a pm saying that but lo and behold, there isn't one in the sent box. I will try and take care of it tonight.

thebarber · Post by **thebarber** » Tue Feb 02, 2016 8:57 am

handmedown03 wrote:Please pm me your info. I actually thought I sent a pm saying that but lo and behold, there isn't one in the sent box. I will try and take care of it tonight.

Got your PayPal

Pulling the wheel wed or Thurs, so I'll get this out at the end of the week

Steering wheel sold!

mktrat · Post by **mktrat** » Fri Feb 05, 2016 5:17 am

Finally got my cross bars installed. Thanks Mr Barber.