a "grommet" thingy

Discuss any problems, warranty, repair, or replacement issues you are having with your Vibe & Matrix
Post Reply
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

a "grommet" thingy

Post by meathead333 »

so i got my oil changed at the dealership the other day because they had a promo. while there i order some touch up paint finally. today i picked up the paint. to my surprise they gave me 2 items, the paint and also a "grommet." (part # 88970750) so i was like "but i only ordered the paint." come to find out, when they changed my oil, they noticed this peice missing, so they ordered it. the "grommet" is the little black plastic, quarter size piece that keeps the retractable arm secure that holds the hood upright when open. the thing is i never knew they ordered it. so i asked how much it was. $10!!! for something that looks like it may have cost 4 cents. luckily for me and them, he said its cover under warranty. anyways...this peice fell out a while back, i remember. the new one doesnt stay in either. the hole in the metal is kinda stretched out. so i doubt ill keep it in, it will just fall out again. anyone else have this problem???
My myspace.com profile My 73' Bronco Cardomain page
Vibe Rater
Posts: 1100
Joined: Mon Sep 23, 2002 1:37 pm

Re: a "grommet" thingy (meathead333)

Post by Vibe Rater »

Not yet. I'll keep an i on it. Can you provide a picture?
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (Vibe Rater)

Post by meathead333 »

yes i will, i am at my gf house, my cam is at home. ill do it this week end
My myspace.com profile My 73' Bronco Cardomain page
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: a "grommet" thingy (meathead333)

Post by ragingfish »

The prop rod is by no means scure in that hole, but it doesn't fall out. It could easily come loose though if I fidget too much.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Hot Vibe
Posts: 237
Joined: Sun Jul 20, 2003 11:05 pm

Re: a "grommet" thingy (meathead333)

Post by Hot Vibe »

Part #14 on this picture. How in the heck did that thing fall out. I will have to take a look at the wife's and see how that thing was installed and maybe a prevention from falling out. I wished that I would have made it to the rally. I have a feeling that I can learn from everyone. Get to know the car inside and out. I am unattached at work. I do not get much hands on these days.
Just here to lend a hand to people who have questions about their Vibe.
Hot Vibe
Posts: 237
Joined: Sun Jul 20, 2003 11:05 pm

Re: a "grommet" thingy (Hot Vibe)

Post by Hot Vibe »

AHHH yes the picture was too large and I did not receive a message.Problem solved

Attached files
Just here to lend a hand to people who have questions about their Vibe.
Sub-Vibe-R
Posts: 2093
Joined: Tue Aug 27, 2002 12:30 am

Re: a "grommet" thingy (Hot Vibe)

Post by Sub-Vibe-R »

Here we go

Attached files
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (Sub-Vibe-R)

Post by meathead333 »

i beleive i am talking about piece # 14.
My myspace.com profile My 73' Bronco Cardomain page
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (meathead333)

Post by meathead333 »

ok i got pics finallythis is the peice i was missing. they wanted $10 for that, lol, yeah right this is what it should look like when in place this is the hole it goes in, mine seems to be kind of stretched out or warped, leaving the grommet to fall out easily hope the pics help understand what i was sayin
My myspace.com profile My 73' Bronco Cardomain page
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: a "grommet" thingy (meathead333)

Post by NovaResource »

Oh, now I see. Yeah, right there where the red X is. Clear as day.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (meathead333)

Post by meathead333 »

hmm, it worked fine when i loaded it. i try and fix it, my bad.
My myspace.com profile My 73' Bronco Cardomain page
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: a "grommet" thingy (meathead333)

Post by NovaResource »

I think it's because you have the pictures in a site that requires a logon and password. As long as you personally are logged in, you alone can see them. But for anyone else (or if you're logged out), the pictures don't display. You should just upload them to the forum and display them.BTW, thanks for understanding my previous post was humor and not "threatening". It seems most people here think all I do is insult people.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (NovaResource)

Post by meathead333 »

yeah they are on my msn group page...ahhhh, i didnt know about the logging on part. makes sense.
My myspace.com profile My 73' Bronco Cardomain page
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (meathead333)

Post by meathead333 »

ok try this this again now.....this is the peice i was missing. they wanted $10 for that, lol, yeah right this is what it should look like when in place this is the hole it goes in, mine seems to be kind of stretched out or warped, leaving the grommet to fall out easily hope the pics help understand what i was sayin
My myspace.com profile My 73' Bronco Cardomain page
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: a "grommet" thingy (meathead333)

Post by NovaResource »

Cool, that worked. Yep, that for sure is part #14.
pmh013
Posts: 872
Joined: Fri Nov 01, 2002 12:25 pm

Re: a "grommet" thingy (NovaResource)

Post by pmh013 »

Not seeing the pics... it asked me to sign in to MSN, so I did, and I still can't see
2003 Satellite AWD Two Tone, traded off at 180,126 kmNow the (fourth) catalytic converter is someone else's problem Now driving a 2007 Dodge Grand Caravan
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (pmh013)

Post by meathead333 »

i reposted them later on in the thread...scroll up.
My myspace.com profile My 73' Bronco Cardomain page
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: a "grommet" thingy (meathead333)

Post by ragingfish »

I'm still getting red X's...both times you posted
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (ragingfish)

Post by meathead333 »

hmmm, right now as i read your post, i see the pics. i am pretty sure nova did too.
My myspace.com profile My 73' Bronco Cardomain page
NSimkins
Global Moderator
Posts: 3091
Joined: Sat Jun 08, 2002 5:43 am

Re: a "grommet" thingy (meathead333)

Post by NSimkins »

quote:hmmm, right now as i read your post, i see the pics. i am pretty sure nova did too. Now that I am at work, I cannot view the pics in either thread. Maybe the Yahoo account has limited bandwidth per user and it has been exceeded? To alleviate that, try to attach the photos to posts here instead of linking them, that way they will always show up.
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: a "grommet" thingy (NSimkins)

Post by NovaResource »

Yeah, that's strange. The second time you posted them they did appear last night but today they aren't there.
Hot Vibe
Posts: 237
Joined: Sun Jul 20, 2003 11:05 pm

Re: a "grommet" thingy (joatmon)

Post by Hot Vibe »

I can not see the pics either. I trust Nova and if he saw them and it was the grommet then I believe it. I did not get a chance to check out my wife's Vibe. Is the grommet rubber or plastic?
Just here to lend a hand to people who have questions about their Vibe.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (Hot Vibe)

Post by meathead333 »

its plastic......this is starting to (removed) me off. i paid $20 extra to msn and another $20 to yahoo for larger email storage. with the upgrade i also got like 30 mb of web document storage. i was thing id have a host now to post pics, guess i was wrong. the second time i posted them i use yahoo briefcase. i dont know now, any ideas???
My myspace.com profile My 73' Bronco Cardomain page
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (NSimkins)

Post by meathead333 »

quote:Now that I am at work, I cannot view the pics in either thread. Maybe the Yahoo account has limited bandwidth per user and it has been exceeded? To alleviate that, try to attach the photos to posts here instead of linking them, that way they will always show up.i am at work and they dont work either. to attach to a post dont i need a host site to post the pics to first and then us ethe link? or maybe i am lost. could you explain it to me. thanks
My myspace.com profile My 73' Bronco Cardomain page
NSimkins
Global Moderator
Posts: 3091
Joined: Sat Jun 08, 2002 5:43 am

Re: a "grommet" thingy (meathead333)

Post by NSimkins »

Create a new reply, under the Reply box there is an area called File Attachment. If you have the photos on your computer, click the Browse button and locate the file. When you post the reply it will attach itself to the thread.You can only post one file per post, so you will have to make 3 replies for the 3 photos.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (NSimkins)

Post by meathead333 »

oh yeah, duh. lol, i knew that. sorry. i just wanted to be cool and post the pics in my posts. i hope i didnt waste $40 for that extra storage. i emailed msn and asked if its possiable to post links to my files. hopefully they tell me how, but i got a bad feelin
My myspace.com profile My 73' Bronco Cardomain page
grumpyx
Posts: 12
Joined: Thu Apr 24, 2003 7:01 am

Re: a "grommet" thingy (meathead333)

Post by grumpyx »

When I purchased my vibe off the showroom floor it was missing.They ordered it for me took a couple of days to get it. Has stayed in so far.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (grumpyx)

Post by meathead333 »

i finally got it i think this is the peice i was missing. they wanted $10 for that, lol, yeah right this is what it should look like when in place this is the hole it goes in, mine seems to be kind of stretched out or warped, leaving the grommet to fall out easily did it work this time??????
My myspace.com profile My 73' Bronco Cardomain page
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: a "grommet" thingy (meathead333)

Post by ragingfish »

Yep, damn big, but we see 'em!
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
Hot Vibe
Posts: 237
Joined: Sun Jul 20, 2003 11:05 pm

Re: a "grommet" thingy (meathead333)

Post by Hot Vibe »

Nice pictures. It looks like the bottom of the hole is bent. Use a washer about the same size of the hole and use something to tap it flush. The grommet should fit in very snugly. It looks like the hole was bent from not having the grommet. Please try it because we do not want bad things to happend to you while your hood is up. It could come crashing down. The hood for the vibe is quite heavy. Unless you do not mind carrying an old broom handle to hold up the hood. I guess you could also say screw it and buy a new hood the comes completely off.
Just here to lend a hand to people who have questions about their Vibe.
meathead333
Posts: 1257
Joined: Fri Mar 14, 2003 4:23 pm

Re: a "grommet" thingy (Hot Vibe)

Post by meathead333 »

i may have to try that. thanks!
My myspace.com profile My 73' Bronco Cardomain page
Post Reply