the cover is hanging. I have been able to plastic weld the two inner supports that were broken, but some fasteners have broken or are missing. I am going to try to include an image of the 'plugs' I need a few more of, but in addition to those there seem to be at least three other types to hold this panel on. One at the very front (inside the panel, not the mud flap christmass tree) which I do not need. Then there are the six in the center, which I have and have found a listing for. But, there is one next to rear wheel (again, inside the panel) That I can not figure out. I hate to take off the other side to see what it looks like as a whole, as they do tend to break on removal. I have some images of the female part in the body. I am considering this (http://www.mcmaster.com/#85985k23/=s7ysww" onclick="window.open(this.href);return false;) for the plugs, 100 for $9 may be cheaper than one from the dealer. Any help or suggestions would be appreciated.Rocker Panel Fasteners
-
kontinuous
- Posts: 14
- Joined: Sun Aug 01, 2004 5:53 am
Rocker Panel Fasteners
Hi all, I have searched the threads but can not seem to get the part number for some fasteners for the rocker arm gray plastic panel. Due to an in motion modification the cover is hanging. I have been able to plastic weld the two inner supports that were broken, but some fasteners have broken or are missing. I am going to try to include an image of the 'plugs' I need a few more of, but in addition to those there seem to be at least three other types to hold this panel on. One at the very front (inside the panel, not the mud flap christmass tree) which I do not need. Then there are the six in the center, which I have and have found a listing for. But, there is one next to rear wheel (again, inside the panel) That I can not figure out. I hate to take off the other side to see what it looks like as a whole, as they do tend to break on removal. I have some images of the female part in the body. I am considering this (http://www.mcmaster.com/#85985k23/=s7ysww" onclick="window.open(this.href);return false;) for the plugs, 100 for $9 may be cheaper than one from the dealer. Any help or suggestions would be appreciated.
the cover is hanging. I have been able to plastic weld the two inner supports that were broken, but some fasteners have broken or are missing. I am going to try to include an image of the 'plugs' I need a few more of, but in addition to those there seem to be at least three other types to hold this panel on. One at the very front (inside the panel, not the mud flap christmass tree) which I do not need. Then there are the six in the center, which I have and have found a listing for. But, there is one next to rear wheel (again, inside the panel) That I can not figure out. I hate to take off the other side to see what it looks like as a whole, as they do tend to break on removal. I have some images of the female part in the body. I am considering this (http://www.mcmaster.com/#85985k23/=s7ysww" onclick="window.open(this.href);return false;) for the plugs, 100 for $9 may be cheaper than one from the dealer. Any help or suggestions would be appreciated.- Attachments
-
- Rear Fast 2
- Rear Fast 2.JPG (36.39 KiB) Viewed 1429 times
-
- Rear Fastner 1
- Rear Fast 1.JPG (36.79 KiB) Viewed 1429 times
-
- plugs
- plugs.JPG (37.85 KiB) Viewed 1429 times
2004 Vibe AWD
2005 Vibe Manual, SOLD
2005 Vibe Manual, SOLD
Re: Rocker Panel Fasteners
I bought Toyota fasteners off EBAY and pulled some of the plastic plugs off at my Local Junk Yard. Good Luck
Re: Rocker Panel Fasteners
I went to the scrapyard to find those plugs and a couple that were slightly larger in size. Grabbed a few extras off the donor vibe and the guy at the counter just said to pocket them.
