That's Two

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
User avatar
millster
Posts: 2752
Joined: Tue Jun 18, 2002 4:49 am

That's Two

Post by millster »

For those who don't regularly surf MV.net. Does this sound familiar?http://www.matrixvibe.net/forums/viewtopic.php?t=3629As I see it, that's two GT's with pulleys and dead oil pumps. Now they said the cam gear failed too, so it's hard to say which went first. But, I think I'll steer clear of the crank pulley for a bit.
-Millster-
2006 Toyota Matrix XR
1995 Saab 9000CSE 2.3T
1986 Jaguar XJ6 Vanden Plas (GM Drivetrain Conversion)
2007 Outback XT EJ257 2.6L Build
mitro
Posts: 70
Joined: Mon Dec 09, 2002 9:45 am

Re: That's Two (millster)

Post by mitro »

138 mph (supposedly) for 20 min... CEL comes on and he goes back to 120 for another 20 min. Yeah... gotta be the pulley. (removed) is wrong with people?
drunkenmaxx
Posts: 6300
Joined: Mon Jul 21, 2003 6:19 am

Re: That's Two (mitro)

Post by drunkenmaxx »

yeah, i ran into a brick wall the other day. then, when i came out today, there was this big huge gaping dent in my front end, i can't figure out how it got there. anyone else have this happen to them?
chew aura pizza cheat main"the world in my hands, there's noone left to hear you scream, noone's there for you"
User avatar
millster
Posts: 2752
Joined: Tue Jun 18, 2002 4:49 am

Re: That's Two (mitro)

Post by millster »

Yes, I read it too. I never said the driving habits didn't figure into it. I'm just stating that it is two that have had the exact same part fail with the exact same mods. Maybe it is, maybe it isn't, I'm no mechanic, I just posted as food for thought.
-Millster-
2006 Toyota Matrix XR
1995 Saab 9000CSE 2.3T
1986 Jaguar XJ6 Vanden Plas (GM Drivetrain Conversion)
2007 Outback XT EJ257 2.6L Build
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: That's Two (mitro)

Post by NovaResource »

quote:138 mph (supposedly) for 20 min... CEL comes on and he goes back to 120 for another 20 min. Yeah... gotta be the pulley. (removed) is wrong with people?I agree. I doubt his 138-mph claim but it's obvious he was abusing the car.
User avatar
millster
Posts: 2752
Joined: Tue Jun 18, 2002 4:49 am

Re: That's Two (NovaResource)

Post by millster »

Definitely. But Nova and Mitro, would the running he gave it kill it on its own (it obviously won't help) or could the mods figure into it at all. I know that popping the rev-limiter can't be good on it, but would that have caused the oil pump to fail or did the pump fail and cause the rest of the damage? And what could have caused the pump to fail? I've read some about crank pulleys being off balance causing oil pumps to fail. After more thought on this one, it does seem more likely that it was just negligence.
-Millster-
2006 Toyota Matrix XR
1995 Saab 9000CSE 2.3T
1986 Jaguar XJ6 Vanden Plas (GM Drivetrain Conversion)
2007 Outback XT EJ257 2.6L Build
goodvibe
Posts: 915
Joined: Sun Jul 27, 2003 10:39 pm

Re: That's Two (millster)

Post by goodvibe »

The story's bull. Rev limit in 5th is 150mph and unattainable. 4th is about 120mph, not the speed claimed. He may have been going fast but you can't bounce off the rev limiter at top speed which is a tad over 130mph though the speedos read a bit higher. I haven't tried but top speed has been done on forums.
Vibe GT, TRD springs, Progress bar, STB, Unichip, Borbet E 16x7.5, 225/50 Bridgestone RE750, beefed up grounds and battery bypass capacitors(had em laying around)
dmitri
Posts: 606
Joined: Fri Apr 25, 2003 9:25 am

Re: That's Two (goodvibe)

Post by dmitri »

its possible with the right conditions in 5th gear man i dont know about the speeds he claimed but its possible to do that in 5th
goodvibe
Posts: 915
Joined: Sun Jul 27, 2003 10:39 pm

Re: That's Two (dmitri)

Post by goodvibe »

If you've got a FI/Nitrous or your clutch is slipping. A GT/XRS wont 8400 rpm rev limit in 5th.
Vibe GT, TRD springs, Progress bar, STB, Unichip, Borbet E 16x7.5, 225/50 Bridgestone RE750, beefed up grounds and battery bypass capacitors(had em laying around)
Post Reply