2004 Vibe GT Intake Installed

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
Bocaj77
Posts: 115
Joined: Sat Jul 20, 2002 2:19 pm

2004 Vibe GT Intake Installed

Post by Bocaj77 »

I installed a intake today on my 04 Vibe GT it was the CAI off of my 03 GT. I cut it down and had to make it a short ram. My question is there is a vacuum line that runs from the intake under the intake manifold over to the passengers side of the engine. This was not on the 03 Vibe GT. For now I just left the vaccum line open and tucked it up. What have others done with this vacuum line??
Ninja_Logan
Posts: 148
Joined: Sat Mar 24, 2007 8:58 am

Re: 2004 Vibe GT Intake Installed (Bocaj77)

Post by Ninja_Logan »

i just left it and i got a CEL, so i reset my ECU and plugged it hoping it would solve the issue but it came back again. So im takin mine to get the codes pulled asap. but if you get a CEL take it in to get the codes pulled asap. otherwise your golden!
ajflan
Posts: 1913
Joined: Mon Jun 19, 2006 5:26 am

Re: 2004 Vibe GT Intake Installed (Bocaj77)

Post by ajflan »

Do you have any pics of the aforementioned line?
February 08' VOTM Check out my Band! http://www.facebook.com/pages/...67945
Bocaj77
Posts: 115
Joined: Sat Jul 20, 2002 2:19 pm

Re: 2004 Vibe GT Intake Installed (Ninja_Logan)

Post by Bocaj77 »

I read the code it was a lean code. And its a small vacuum line that runs under the intake manifold from the stock air box.
Petrucci914
Posts: 991
Joined: Sun Oct 23, 2005 12:33 am

Re: 2004 Vibe GT Intake Installed (Bocaj77)

Post by Petrucci914 »

I thought the 04 GT had an air pump, so it had an extra part needed to hook to the intake. So you need to buy one for your year.
2003 Pontiac Vibe Base - AutomaticTRD Supercharger w/ Smoothflow PulleyaFe Drop-in Filter - DC Sports HeaderFull 2.25" Exhaust -Magnaflow Catback + CatsOptima RedTop - Tru-Cool Tranny Cooler
vibegtcouple
Posts: 194
Joined: Thu Apr 27, 2006 1:22 am

Re: 2004 Vibe GT Intake Installed (Petrucci914)

Post by vibegtcouple »

on my i but the cai on i but a dent right at the point were the air pump would hit it fits good . the hose is for your egr i think. you car go to az and get a vac . print out to see what it go to .

371087=12446-1187521205_l.jpg
vibegtcouple
Posts: 194
Joined: Thu Apr 27, 2006 1:22 am

Re: 2004 Vibe GT Intake Installed (vibegtcouple)

Post by vibegtcouple »

herhttp://forums.genvibe.com/zerofile/10726/CIMG2069.JPGe is where the fliter came out
Bocaj77
Posts: 115
Joined: Sat Jul 20, 2002 2:19 pm

Re: 2004 Vibe GT Intake Installed

Post by Bocaj77 »

I figured it out, you take that vacuum line and attach it to the nipple under the throttle body.
Post Reply