my new guages

Devlop · Post by **Devlop** » Fri Jun 04, 2004 8:33 am

I customized the bezel around the stereo to fit my new guages. Tell me what you guys think.

Attached files

AKLGT · Post by **AKLGT** » Fri Jun 04, 2004 8:53 am

looks great there, devlop! i have to agree w/ saved that you def have one of the best done (classy and not flashy) vibes!

rsgriff115 · Post by **rsgriff115** » Fri Jun 04, 2004 9:55 am

I have one question Devlop, what are the brackets like behind the head unit and gauges, i need to install an equalizer under my head unit and am just curious if you used the stock ones or what. Any advice would be greatly appreciated and props on the very nice install and Alpine head unit.

Nervous_Dog · Post by **Nervous_Dog** » Fri Jun 04, 2004 10:51 am

That looks great! Very clean. Good job I love Alpine head units. I've owned 3.

Mr. Poopypants · Post by **Mr. Poopypants** » Fri Jun 04, 2004 12:11 pm

Not too bad, I would have figured out a way to make it all flush mounted, but still, nice job.

Mavrik · Post by **Mavrik** » Fri Jun 04, 2004 10:32 pm

Nice way to fill in that space those smaller radio units leave behind. Looks very good.

grego · Post by **grego** » Sat Jun 05, 2004 12:22 am

Looks great, almost like it belonged there from the beginning.

Triton · Post by **Triton** » Sat Jun 05, 2004 12:49 am

Looks great! Very nice job.

ragingfish · Post by **ragingfish** » Sat Jun 05, 2004 2:48 am

Quote, originally posted by Devlop »I customized the bezel around the stereo to fit my new guages. Tell me what you guys think.Dude, that's fricken awesome, how'd you do that?

russ257 · Post by **russ257** » Sat Jun 05, 2004 2:58 am

i agree very tight, share your secrets

Devlop · Post by **Devlop** » Sat Jun 05, 2004 5:34 am

I bought a sheet of ABS plastic and cut it to cover the hole with a little bit of overlap so that I could glue it to the back side. I bought some plastic weld from the store. The stuff works really well. Before I glued it in, I cut the hole for the stereo and then marked where it should go in the bezel. After that was figured out and glued in, I measured and used a hole saw to cut the holes for the guages. Because of clearance, I had to shave a little more of the bezel along the top for the ring on the guages. After all this, i used a two part plastic repair filler (same uses as what bondo is for metal) and smoothed the edges all around so that it looked like one piece. Then I had it painted.I'm really happy with the way it turned out, and thanks for all the compliments.

Fievel · Post by **Fievel** » Sat Jun 05, 2004 6:18 am

Very nice...looks very professional!

mwebb · Post by **mwebb** » Sun Jun 06, 2004 5:25 am

That looks sweet!

Fialchar · Post by **Fialchar** » Sun Jun 06, 2004 10:17 am

Looks great man ^^Very clean, professional look.

noginsk · Post by **noginsk** » Sun Jun 06, 2004 12:21 pm

Wow, as I am waiting for this pic to download (dialup) I am watching it come slowly but surely. Line by line, and I am saying to myself, what is this going to look like. I begin to see something. Then it all becomes clear and I say to myself, huh, will you look at that! Totally awesome man. Gives me ideas to copy you for future projects, assuming you don't mind ofcourse!

Devlop · Post by **Devlop** » Mon Jun 07, 2004 11:36 am

Quote, originally posted by noginsk »Wow, as I am waiting for this pic to download (dialup) I am watching it come slowly but surely. Line by line, and I am saying to myself, what is this going to look like. I begin to see something. Then it all becomes clear and I say to myself, huh, will you look at that! Totally awesome man. Gives me ideas to copy you for future projects, assuming you don't mind ofcourse!It only takes money to persuade me to not care. J/KI take it as a compliment for someone to want to do what I did.

drunkenmaxx · Post by **drunkenmaxx** » Mon Jun 07, 2004 11:20 pm

looks freakin' clean man! i can't even tell it's not stock.where's savedbyzero? he would surely appreciate something like that!

savedbyzero · Post by **savedbyzero** » Tue Jun 08, 2004 12:13 am

YES, I TRUELY DO! That is abosolutely tits! Great job, man!No pillar gauge pod+turbo+other nieve car driver=OWNED!No one is gonna see that thing comin'I can hear it now, "Look at the stationwagon with rims! He's got an exhaust, too! Let's show him some VTEC!" Meanwhile, in the engine bay of a station wagon, a slight hiss turns into an all out roar as it has it's fill of rice, again! And that was just an appetizer!Once again, great job! I really need to see this bad boy in person! Make sure I'm at the top of the list when you get tired of that "station wagon!"

Devlop · Post by **Devlop** » Tue Jun 08, 2004 1:20 am

Are you coming to the MI meet? I'll be there and then you can get a ride.

savedbyzero · Post by **savedbyzero** » Tue Jun 08, 2004 2:24 am

Dude, don't rub it in...no. I have to freakin' WORK!!!!! D@MN!Did you notice the gradual progression of my anger...ya. pissed.

Devlop · Post by **Devlop** » Tue Jun 08, 2004 6:11 am

Well that sucks. Maybe there'll be another meet sometime this summer that we can both make it to.

AKLGT · Post by **AKLGT** » Tue Jun 08, 2004 6:19 am

sweet! can i take it for a spin too? PLEASE??? of course you can be there too!

Devlop · Post by **Devlop** » Tue Jun 08, 2004 8:38 am

Yeah, I'm sure I'll be giving lots of people rides. Maybe I'll set up a little both and sell rides for a buck.

Fialchar · Post by **Fialchar** » Tue Jun 08, 2004 8:45 am

I sell rides for those all the time Oh.. you said B-U-C-K, with a B, stupid me

knuckles · Post by **knuckles** » Sat Jun 12, 2004 3:05 am

what do you have under the hoodbecause a boost gauge mean s something and i would like to know

Devlop · Post by **Devlop** » Sat Jun 12, 2004 5:29 am

132465=4733-DSCF0034.JPG

rasermon · Post by **rasermon** » Sun Jun 20, 2004 12:30 am

You done a fine job Devlop. Are you going to bring some of your homemade STB's to the meet this year? If so, I would like one. See you in 6 days....

Devlop · Post by **Devlop** » Sun Jun 20, 2004 9:54 am

I might. Not sure, I'm gonna be busy this week cuz I'm gonna try and get some new parts for my drivetrain put in, but we'll see. I don't have any layin around, so I would have to build them. I'll try to keep you informed. I'm more than happy to build you one though, just not sure if I'll be able to get around to it this week.

rasermon · Post by **rasermon** » Sun Jun 20, 2004 10:01 am

No problem bro. Don't go out of your way to get one done. I can hook up with you another time.

Herb · Post by **Herb** » Mon Jun 21, 2004 6:19 am

Man, I miss having a turbo charged car!Looks great man. What paint did you use for the abs sheet? It matches quite well with the center bezel. The paint is wearing off of the cover for my window controls so I want repaint them.

Devlop · Post by **Devlop** » Mon Jun 21, 2004 8:54 am

We have one of those chromavision tools at work, so my buddy just used that to match the paint. He had to tinker with it a little, but we got it to match pretty good.

Merzbow · Post by **Merzbow** » Fri Jun 25, 2004 5:14 am

Beautiful!

my new guages

my new guages

Re: my new guages (Devlop)

Re: my new guages (Devlop)

Re: my new guages (rsgriff115)

Re: my new guages (Devlop)

Re: my new guages (Mr. Poopypants)

Re: my new guages (Devlop)

Re: my new guages (grego)

Re: my new guages (Devlop)

Re: my new guages (ragingfish)

Re: my new guages (russ257)

Re: my new guages (Devlop)

Re: my new guages (Fievel)

Re: my new guages (mwebb)

Re: (noginsk)

Re: (Devlop)

Re: (drunkenvibe)

Re: (savedbyzero)

Re: (Devlop)

Re: (savedbyzero)

Re: (Devlop)

Re: (trdvibe)

Re: (Devlop)

Re: (knuckles)

Re: (Devlop)

Re: (rasermon)

Re: (Devlop)

Re: my new guages (Devlop)

Re: my new guages (Herb)

Re: (Devlop)