Compression ratio; fuel octane

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
jake75
Posts: 4792
Joined: Sun Feb 09, 2003 1:33 pm
Location: Columbus, OH

Compression ratio; fuel octane

Post by jake75 »

I just read that the compression ratio of the Vibe engine is 10:1. I thought that high compression engines required higher octane than 87. On the other hand, always read that use of any higher octance than recommended was a waste of money, and might even cause damage. Any advantge to using higher octane in the Vibe? Any anticipated damage caused by use of higher octane fuel?
2009 Vibe 1.8L Carbon Gray AT Power Pkg 1/12/092003 Vibe 1.8L Neptune AT Mono Power Pkg 1/27/03 [sold 2/2/09]2007 T&C SWB 7/31/07 "Broke people stay broke by living like they're rich. Rich people stay rich by living like they're broke."
Jahntassa
Posts: 2979
Joined: Wed Jul 09, 2003 2:06 pm

Re: Compression ratio; fuel octane (jake75)

Post by Jahntassa »

I know the GT requires the higher octane, just like my old Ford Probe GT.. anything less than 92 octane will start the engine knocking..
2003 Vibe GT Lava"He inched his way up the corridor as if he would rather be yarding his way down it.""For a moment, nothing happened. Then, after a second or so, nothing continued to happen." - Douglas Adams...we all miss you
User avatar
joatmon
Posts: 10174
Joined: Fri Mar 21, 2003 5:19 am
Location: Room 101

Re: Compression ratio; fuel octane (Jake75)

Post by joatmon »

The base engine has a lower compression ratio and does not need higher octane gas. There's a couple of threads that talk about the effect of running higher octane in the base engine, such as thread 4643 thread 4845 and thread 177 Most people feel that running higher octane fuel in the base engine is a waste of money and may result in an increase in engine deposits. Some feel that the automatic knock sensor would detect the higher octane, advance the timing and give more power. I don't think any Viber has done a scientific analysis (with dynomometer results and internal engine inspection) to settle the question absolutely. I'm cheap and run 87 in my base.If you have the GT, then you need high octane because of the higher compression ratio. Using the lower octane fuel will either give you knocking, or maybe the timing will be retarded and you'll lose power.
Image
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Compression ratio; fuel octane (joatmon)

Post by ragingfish »

quote:Using the lower octane fuel will either give you knocking, or maybe the timing will be retarded and you'll lose power.I believe I read somewhere the more the car retards the timing, the worse it is for the engine over a long period of time?In other words, I think if you continue to run 87/89 octane over several months, it can cause premature wear of engine components, yes/no?
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
User avatar
joatmon
Posts: 10174
Joined: Fri Mar 21, 2003 5:19 am
Location: Room 101

Re: Compression ratio; fuel octane (ragingfish)

Post by joatmon »

All I can be sure of is that I have a base engine, not the GT, and the owner's manual says to use 87 octane in it, and that's what I've been using. If I had a GT, I'd use premium. I don't know which engine jake75 has. It might be better to move back over to http://forums.genvibe.com/zerothread?id=4643 and consolidate the discussion.
Image
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Compression ratio; fuel octane (joatmon)

Post by ragingfish »

quote:It might be better to move back over to http://forums.genvibe.com/zerothread?id=4643 and consolidate the discussion.Agreed.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: Compression ratio; fuel octane (jake75)

Post by NovaResource »

quote:I just read that the compression ratio of the Vibe engine is 10:1. I thought that high compression engines required higher octane than 87.The base is 10:1, the GT is 11.5:1. Compression ratio is only one factor to octane requirement. Cylinder pressure is another. Things like overlap (having both the intake and exhaust valves open at the same time) lowers cylinder pressures and allows higher compression engine run on lower octane. Also, the cylinder head chamber design has and effect.quote:On the other hand, always read that use of any higher octance than recommended was a waste of money, and might even cause damage.No damage really, just a waste of money. The only real damage comes from using lower than required octane. That's 87 minimum on the base, 91 minimum on a GT.quote:Any advantge to using higher octane in the Vibe?Only on a modified Vibe (supercharger, turbo, etc). On a stock Vibe (even one with a CAI) there is no real advantage.quote:Any anticipated damage caused by use of higher octane fuel?See my above comment.
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Compression ratio; fuel octane (silverawd26)

Post by ragingfish »

I'm not sure they even sell gas lower than 87 anymore.Some places consider 89 as regular...but I've never seen lower than 87.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: Compression ratio; fuel octane (ragingfish)

Post by NovaResource »

I have seen 85-octane "Economy" gas.
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Re: Compression ratio; fuel octane (NovaResource)

Post by ragingfish »

quote:I have seen 85-octane "Economy" gas.As usual, I stand corrected.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Re: Compression ratio; fuel octane (silverawd26)

Post by AKLGT »

I have a GT and never find any octane higher than 90 here. is that going to damage my engine over the long run?
AKLGT1998 Subaru 2.5RS
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: Compression ratio; fuel octane (trdvibe)

Post by NovaResource »

quote:I have a GT and never find any octane higher than 90 here. is that going to damage my engine over the long run?Probably not. Your colder climate will help offset the slightly lower octane.
dmitri
Posts: 606
Joined: Fri Apr 25, 2003 9:25 am

Re: Compression ratio; fuel octane (NovaResource)

Post by dmitri »

nah its not going to hurt it. the higher octane will keep your engine cleaner though
NovaResource
Posts: 2062
Joined: Mon Jul 08, 2002 12:22 am

Re: Compression ratio; fuel octane (dmitri)

Post by NovaResource »

quote:the higher octane will keep your engine cleaner thoughOctane has nothing to do with keeping your engine clean. Octane has to do with a fuels ability to resist pre-ignition.While most higher octane fuels are slightly cleaner than lower octane fuels, all fuels are required to meet minimun standards on keeping engines clean.
Yoda
Posts: 145
Joined: Mon Oct 14, 2002 9:00 pm

Re: Compression ratio; fuel octane (trdvibe)

Post by Yoda »

good info so far - only thing I can add is that you don't really need as much octane to prevent knocking at higher altitudes... http://www.chevron.com/prodserv/fuels/g ... tane.shtml Not being familiar with Alaska, I'm wondering what kind of altitudes you see there. I know last time I was in CO, they also sold 85 octane as regular unleaded at all the gas stations.
My old Abyss GT - Power, Moon and Tunes, Monochrome Mods - Installed , then removed, Sylvannia Silverstars (Headlamp only)Future mods - ?
Post Reply