06 AWD turbo

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 5:35 am

Yep going turbo.My base line dyno before any mods being doneSome of the toys custom log headergreddy bovt-25 turbointercooleremange ultimate

BlueCrush · Post by **BlueCrush** » Tue Jun 15, 2010 5:55 am

NICE!!!! You came so close to 100whp..... Can't wait, Keith!!! This is going to be AWESOME!!!!!!

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 6:06 am

if it wasn't 90 degrees in the shop i'm sure I would have hit 100

jkm311 · Post by **jkm311** » Tue Jun 15, 2010 6:12 am

Please tell me you can make the Indy Meet with this beast. Lie to me, if you have to.

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 6:14 am

Quote, originally posted by jkm311 Â»Please tell me you can make the Indy Meet with this beast. Lie to me, if you have to.sorry won't be there... the car should be mid build at that time. I have a few odds and ends to get yet, once that happens I'm waiting on an open spot in the BYT garage to get dirty LOL

Wolfman213 · Post by **Wolfman213** » Tue Jun 15, 2010 6:20 am

Freakin A Awesome!!!!!! Sucks you won't make the Indy meet, but can't wait to follow the progress of the turbo upgrade!!

AKLGT · Post by **AKLGT** » Tue Jun 15, 2010 6:36 am

are you beefing up the tranny to handle the power? and also brakes. all that power, you gotta stop.

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 6:45 am

Quote, originally posted by AKLGT Â»are you beefing up the tranny to handle the power? and also brakes. all that power, you gotta stop. tranny no, other than my trans cooler. I've already looked in to level 10 as an add on down the road. I'm not going for huge numbers, just a better daily driver. 6-7psiBrakes yes, getting ebc pads and slotted rotors. It's on the list, just haven't made the purchace yet.

lovemyraffe · Post by **lovemyraffe** » Tue Jun 15, 2010 7:07 am

Would you build it faster? I can't wait to see it finished!

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 7:34 am

Quote, originally posted by lovemyraffe Â»Would you build it faster? I can't wait to see it finished!only if you donate money to the build... lol I take paypal

AKLGT · Post by **AKLGT** » Tue Jun 15, 2010 8:29 am

Quote, originally posted by keithvibe Â»tranny no, other than my trans cooler. I've already looked in to level 10 as an add on down the road. I'm not going for huge numbers, just a better daily driver. 6-7psiBrakes yes, getting ebc pads and slotted rotors. It's on the list, just haven't made the purchace yet.dunno about the toyota 1.8L guys, but the subie guys have nothing very good to say about their products. I used IPT Transmission in New Jersey for my valve body mod/upgrade and they were great. We've had a lot of success with them vs Level 10. But maybe they are more familiar with the 1.8L AWD yota trans than the 2.5L Subie trans.and definitely upgrade those brakes! When I did my turbo swap on the Legacy few yrs back, added a whole lot of power but not the stopping power. It was much much needed! LOL. Good that you already have that in the works though.

06pvibe · Post by **06pvibe** » Tue Jun 15, 2010 8:50 am

Turbo timer? Forged internals?Lightened fly... Ooops!! LOL

jkm311 · Post by **jkm311** » Tue Jun 15, 2010 9:15 am

And to think... you won VOTY WITHOUT any of this...

keithvibe · Post by **keithvibe** » Tue Jun 15, 2010 9:53 am

Quote, originally posted by 06pvibe Â»Turbo timer? Forged internals?Lightened fly... Ooops!! LOLturbo timer... waist of money... mine is oil and water cooler.nope stock internerals, not going for huge numbers, just better daily driver.LOL @lightened fly..>Quote, originally posted by AKLGT Â»dunno about the toyota 1.8L guys, but the subie guys have nothing very good to say about their products. I used IPT Transmission in New Jersey for my valve body mod/upgrade and they were great. We've had a lot of success with them vs Level 10. But maybe they are more familiar with the 1.8L AWD yota trans than the 2.5L Subie trans.and definitely upgrade those brakes! When I did my turbo swap on the Legacy few yrs back, added a whole lot of power but not the stopping power. It was much much needed! LOL. Good that you already have that in the works though. Thanks for the heads up, and being they are in jersey helps a lot.I'll look in to themand to save everyone from asking about guages... no gages, running my guages threw my lap top. Going total stealthbut if i were, it would be thishttp://cgi.ebay.com/ebaymotors...%3AIT

AKLGT · Post by **AKLGT** » Tue Jun 15, 2010 12:22 pm

are you going to run your laptop every time you drive? probably not. you HAVE TO HAVE GAUGES! you can still be stealth, mount them in your glove compartment or one of the cubbies the vibe has everywhere in the car. Seriously, no gauges or only on your laptop is a very bad idea. please, you're putting a lot of time, money, effort into this build to skimp out on such important parts! I would recommend: boost, EGT, wideband, oil pressure at the bare minimum.

bull77 · Post by **bull77** » Wed Jun 16, 2010 3:43 am

good god keith!!! u da man!!! Quote, originally posted by keithvibe Â»

Wolfman213 · Post by **Wolfman213** » Wed Jun 16, 2010 3:49 am

Quote, originally posted by keithvibe Â»This picture kinda reminds me of Johnny 5 from Short Circuit!!! Not sure why, but it does, and that's freakin awesome!!!

AKLGT · Post by **AKLGT** » Wed Jun 16, 2010 4:51 am

wow. that FMIC looks tiny. LOL. guess I'm used to seeing huge monstrousities. Anyways, to add to list of MUST HAVES for any turbo swaps/upgrades, etc, I'm sure you've got these handled, but for anyone else:injectors - stock aren't gonna cut it anymore!fuel pump - again, stock just not gonna do it (not well anyways)air intake - larger MAF is a must have! Engine Management - looks like you got the GreddyTune - looks like you have that taken care of as wellBrakes - better pads, larger rotors (if possible)Transmission - upgraded valvebody and solenoids (at the very least)Engine/Motor - guess you can go til it blows. LOL. But I'd still recommend better internals like rods, pistons, bearings, stronger case or crank, head studs, etc. oh and CAMS! If you can do valve work and cams?? oh yeah! and remember, you will need to run better fuel through your system, so MINIMUM 92+ octane

keithvibe · Post by **keithvibe** » Wed Jun 16, 2010 5:37 am

Quote, originally posted by AKLGT Â»wow. that FMIC looks tiny. LOL. guess I'm used to seeing huge monstrousities. Anyways, to add to list of MUST HAVES for any turbo swaps/upgrades, etc, I'm sure you've got these handled, but for anyone else:injectors - stock aren't gonna cut it anymore!xrs injectors are sitting in the garagefuel pump - again, stock just not gonna do it (not well anyways)I'll keep an eye on that though I won't think it will be an issueair intake - larger MAF is a must have! why a larger maf? Both guys I know running turbo and a few in canada running SCers on trixs are running stock mafEngine Management - looks like you got the GreddyyepTune - looks like you have that taken care of as well tune won't be an issueBrakes - better pads, larger rotors (if possible)ebc pads and rotors are on the list, just short on 300bucks for them right nowTransmission - upgraded valvebody and solenoids (at the very least)sent off an email to IPT,waiting to hear backEngine/Motor - guess you can go til it blows. LOL. But I'd still recommend better internals like rods, pistons, bearings, stronger case or crank, head studs, etc. oh and CAMS! If you can do valve work and cams?? oh yea!thats the plan, run it till it goesand remember, you will need to run better fuel through your system, so MINIMUM 92+ octane already made the switchas for the guages, yes i plan on having my lap top with me. I use it daily so it won't be an issue. But when it's time to upgrade the laptop I prob invest in guages.Thanks, anything else?

06pvibe · Post by **06pvibe** » Wed Jun 16, 2010 6:19 am

Quote, originally posted by jkm311 Â»And to think... you won VOTY WITHOUT any of this... Only because I voted for him and his Vibe. It was a close race and I was the deciding vote... me and 200 other members. FYI: Currently, this seems to be the most active thread on the site, Keith!! Why do you think that is?A lotta' pressure, my friend.

06pvibe · Post by **06pvibe** » Wed Jun 16, 2010 6:21 am

Quote, originally posted by Wolfman213 Â»This picture kinda reminds me of Johnny 5 from Short Circuit!!! Not sure why, but it does, and that's freakin awesome!!!I can see that!! It's all that mechanical stuff, the way it fits together. The "face," I believe.

keithvibe · Post by **keithvibe** » Wed Jun 16, 2010 6:56 am

Quote, originally posted by 06pvibe Â»Only because I voted for him and his Vibe. It was a close race and I was the deciding vote... me and 200 other members. FYI: Currently, this seems to be the most active thread on the site, Keith!! Why do you think that is?A lotta' pressure, my friend.i'm not worried.... it's the most active only because I will be the first to turbo the AWD

KNINE · Post by **KNINE** » Wed Jun 16, 2010 7:20 am

You are truly a GenVibe God.

AKLGT · Post by **AKLGT** » Wed Jun 16, 2010 10:12 am

Quote, originally posted by keithvibe Â»i'm not worried.... it's the most active only because I will be the first to turbo the AWDWrong. You are not the first my friend. Faultline was the first I believe on his. There was also another guy, Green... something. It was a good 2+ yrs ago? And he blew his motor.As for the MAF, it could be different for you, but You will want a larger air intake (CAI/SR) than the stock airbox. the flow of air is important for the turbo. Sorry, you don't need the actual MAF sensor to be larger, just the intake housing around it. Sorry... should have clarified.Also, I would call IPT. Talk to Ty or John. Several of us Subie guys have used them with great success. You will need to send them your VB to modify, but sounds like you're car will be down for awhile anyways. Takes a few days to get it done and back, unless you can drive there and have them do it same day.

BlueCrush · Post by **BlueCrush** » Wed Jun 16, 2010 11:49 am

Quote, originally posted by AKLGT Â»Wrong. You are not the first my friend. Faultline was the first I believe on his. There was also another guy, Green... something. It was a good 2+ yrs ago? And he blew his motor.Faultline has a Turbo FWD Base. Greenfire had a S/C AWD.The are a couple other S/C AWDer's on MO.Keith will be the first AWD Turbo.

Kamikaze · Post by **Kamikaze** » Wed Jun 16, 2010 11:51 am

Quote, originally posted by BlueCrush Â»Faultline has a Turbo FWD Base. Greenfire had a S/C AWD.The are a couple other S/C AWDer's on MO.Keith will be the first AWD Turbo.You beat me to it.

keithvibe · Post by **keithvibe** » Wed Jun 16, 2010 7:47 pm

Quote, originally posted by AKLGT Â»Wrong. You are not the first my friend. Faultline was the first I believe on his. There was also another guy, Green... something. It was a good 2+ yrs ago? And he blew his motor.this has been addressed by my fellow vibe brothers, thanks guysAs for the MAF, it could be different for you, but You will want a larger air intake (CAI/SR) than the stock airbox. the flow of air is important for the turbo. Sorry, you don't need the actual MAF sensor to be larger, just the intake housing around it. Sorry... should have clarified. It's going to connect up to the aem cold air intake that is on the car nowAlso, I would call IPT. Talk to Ty or John. Several of us Subie guys have used them with great success. You will need to send them your VB to modify, but sounds like you're car will be down for awhile anyways. Takes a few days to get it done and back, unless you can drive there and have them do it same day.this depends on my boss and how long he lets me borrow the company car, lol. I sent an email off to them but I have yet to hear back. Hope that is not their typical way of doing businessMy replys are bold

AKLGT · Post by **AKLGT** » Thu Jun 17, 2010 3:13 pm

it's never a good idea to email guys who are usually elbow deep in oil and transmission fluid. CALL them.

keithvibe · Post by **keithvibe** » Thu Jun 17, 2010 7:24 pm

Quote, originally posted by AKLGT Â»it's never a good idea to email guys who are usually elbow deep in oil and transmission fluid. CALL them. HA HA I heard back from them last night.

millster · Post by **millster** » Thu Jun 17, 2010 9:31 pm

I thought that turbo looked familiar, but didn't look at the text above the picture until I saw the fact you mentioned water and oil cooling. Just got my t25 to replace the Mitsu td04 that had been hacked onto my engine. Of course, my install won't be quite as arduous. Good luck! Looks like a fun project!

Mariachi · Post by **Mariachi** » Fri Jun 25, 2010 10:16 am

good luck! looks like a fun project. can't wait to see the end result.im really wanting to start some engine mods other than my cai but just waiting til i move back to tx. im not going to say anything this time and just surprise everyone. keep up the good work. i really do want to see everything all hooked up and in.

Faultline · Post by **Faultline** » Mon Jul 05, 2010 3:23 pm

Quote, originally posted by keithvibe Â»as for the guages, yes i plan on having my lap top with me. I use it daily so it won't be an issue. But when it's time to upgrade the laptop I prob invest in guages.Thanks, anything else?Congratulations on deciding to turbo your Vibe. I dont know if you are the 1st AWD, but I am only FWD.Every thing looks good to me. I have been turboing my Vibe since 2003.I blew my motor once because of some oil leaks,abd the oil level was low. I blew my tranny last year finally and replaced it with a 6 speed.I have run up to 15 psi on my stock motor with race gas, and I know what this car can do. BECAUSE YOU ARE RUNNING ONLY 6 TO 7 PSI (OR ANYTHING LESS THAN 10)Your inter cooler size is perfect.You do not need a larger MAFYou do not need bigger brakes.I dont know how much power the AWD drive train can handle, but I would break it before upgrading it. 6 to 7 psi sounds fun, but safe too. AT this level, you will go years on the the stock internals, and be fine. If you have any questions, shoot me an E-mail, I will talk on the phone if you like too. ps, I only have a boost guage, I only use a a wideband 02 sensor for tuninig once a year with a lap top that the shop has. I dont even have one.

keithvibe · Post by **keithvibe** » Mon Jul 05, 2010 7:46 pm

Thanks brother.It's deff going to be an interesting build. Thanks for the info, VERY MUCH!I dropped the exhaust this past weekend to see about mocking up the turbo location. Ran in to a problem, my snap ring pliers were not large enough to alow me to clock the inlet side of the turbo. I had to order a larger set. Once I get the new pliers I'll drop the exhaust again and get things moving forward again.

vibedrivermatt · Post by **vibedrivermatt** » Sun Jul 11, 2010 4:51 am

whoa cool AWD turbo!! looking forward to seeing your progress on this!

northvibe · Post by **northvibe** » Sun Jul 11, 2010 10:01 pm

per our pm's, I'm excited to see progress. remember to take pics!

keithvibe · Post by **keithvibe** » Fri Jul 16, 2010 5:11 am

The header is now out for welding. The custom exhaust flange for the turbo will be in next week.Once those two are in, the build will move quick.Sometimes I have asked myself why? It's a huge headache, but I'm reminded each time I get in the car why... God is this car slow.

06pvibe · Post by **06pvibe** » Fri Jul 16, 2010 5:21 am

Quote, originally posted by keithvibe Â» I'm reminded each time I get in the car why... God is this car slow. Yeah. Ain't it the truth. 'Wish there were some other way, less extreme way to liven them up a bit?Kudos to you, Keith for this build, Man. I'm not sure I would have the time, the patience or cash to do it. And I KNOW I don't have the garage... which would make it much easier too.'Can't wait for numbers, and especially your personal impressions, which are better than numbers in many cases. After all, you're the one that will have to live with it in the end. (How is Pa going to feel about a header on a car that did not come with a header from the factory? Pa was always pretty strict in the Inspection department... at least going by the rules.Quote, originally posted by Pa DOT (paraphrasing) Â»Anything that is not factory installed on a road motor vehicle will be disallowed via State Inspection.... I used to HATE having my highly modified Volvo sedan inspected. (Yeah. Go ahead and laugh. It would blow your doors off.) I'd have to undo a lot just to get it to pass. De-tuning was NOT an option. Headlights (Euro H4's,) fog lights, passing lights were NOT an option!!!! And my inspection came due in JANUARY!!!

keithvibe · Post by **keithvibe** » Fri Jul 16, 2010 5:33 am

Quote, originally posted by 06pvibe Â» How is Pa going to feel about a header on a car that did not come with a header from the factory? Pa was always pretty strict in the Inspection department... at least going by the rules.not to get in legal debate, most shops never look at a header, heck I don't think one shop has ever even poped the hood on any of my rides.MY girl HPL pointed out this to me... who made the 4th comment on this video? HAHA thanksI figured out who made the commentthanks A Psycho Martyrhttp://www.youtube.com/watch?v...lated

milocas · Post by **milocas** » Tue Aug 17, 2010 10:10 am

whoa man, when you get done with this, i gotta check this out myself in person. Keep it up bro!!

keithvibe · Post by **keithvibe** » Tue Aug 17, 2010 10:18 am

hopefully soon... it was scheduled for this past weekend, but something happened i guess.

ou.grizzly · Post by **ou.grizzly** » Sun Sep 12, 2010 2:11 am

Any updates?

keithvibe · Post by **keithvibe** » Sun Sep 12, 2010 3:01 am

Quote, originally posted by ou.grizzly Â»Any updates?As expected some glitchesBut the parts to solve the glitches will be here, Monday.Hopefully, next weekend there will be some forward progress.

A Psycho Martyr · Post by **A Psycho Martyr** » Tue Nov 02, 2010 10:40 am

you may have already stated this somewhere in this thread but I couldn't find it....What motor do you have with the turbo?I'm having my mechanic look for a 2zz-ge or a wrecked Celica Gt-S for me to do a motor swap.This a good idea? Or should I just get a Vibe gt motor. I know it's a 2zz as well, but what's tha difference exactly?

06pvibe · Post by **06pvibe** » Tue Nov 02, 2010 5:06 pm

I don't think Keiths hasn't gotten the turbo in yet, and I am pretty sure he's staying w/the original 1ZZ AWD engine (rated +/-116hp.)Funny though, but I was wondering the same thing. It came to me on my way to work yesterday morning.I know they are both considered 1.8L engines, but there is a very slight displacement difference too... only 1 or 2 cc's, IIRC?Given the the high revving nature of the 2ZZ, it might have a bigger bore/shorter stroke arrangement, or over-square, than does the 1ZZ? Add a cyl head that flows better at high RPMs, bigger valves and a different camshaft, perhaps a slightly bigger throttle body too and there you have it. Of course this would also have the effect of less low end torque compared to the 1ZZ, which could explain the higher final drive ratio in the 6-sp tranny.This is all speculation on my part based on what I know about the nature of the beast, but it was what was going through my mind yesterday.

keithvibe · Post by **keithvibe** » Tue Nov 02, 2010 7:54 pm

i'm still going with the 1zz.I haven't done nothing with the build. I have everything ready to go in, however, I am still looking for a good beater car to use while the vibe is down. I made an offer on one car and the seller didn't accept it, so I had to walk.

DrunkenMonster · Post by **DrunkenMonster** » Tue Dec 28, 2010 5:32 am

Updates?

keithvibe · Post by **keithvibe** » Tue Dec 28, 2010 5:41 am

beater car obtained. Build starts around March.

BlueCrush · Post by **BlueCrush** » Tue Dec 28, 2010 6:23 am

Quote, originally posted by keithvibe Â»beater car obtained. Build starts around March.SWEET!

Salsa Guy · Post by **Salsa Guy** » Tue Dec 28, 2010 7:51 am

Quote, originally posted by keithvibe Â»beater car obtained. Build starts around March.You give us 1zz AWD guys hope. Your my hero Keith!

patmanbbe · Post by **patmanbbe** » Wed Jan 12, 2011 10:06 pm

Sorry I don't want to come off as being negative but I was curious about some of the details of this project. It seems like a lot of work and money for a small gain in horsepower.... How much is this build gonna cost you? What are your power goals?Why not swap in a 3SGTE, you can buy one with an AWD tranny. I know a shop that can do it. His name is Dr. Tweak. Here is a llink to his site:http://www.phoenixtuning.com/He gave me quote a while back for a 3SGTE swap into a 1970 Toyota Corona. would have been under 5k for a complete swap and tune. 250 plus horsepower from a stock 3SGTE, not even hard to get it upto 400 hp.