Rear Disc Brakes on 03 Vibe GT

Pwrhouss · Post by **Pwrhouss** » Mon Oct 25, 2010 8:07 pm

I just bought an 03 Vibe GT. I replaced the front brakes/rotors like any other car. On the back, I took the two caliper bolts out but it wouldn't budge. Are the back different from the front? I've got my Haynes manual coming but I really need to get these done. Any body know how? THanks

vibedrivermatt · Post by **vibedrivermatt** » Mon Oct 25, 2010 10:18 pm

did you try to blast then with a lubricating penetrant? my favorite is PB blaster. Other than that I dunno I've never removed mine. You can also look in the online service manual for the toyota matrix. Its in the maintenance bay section.

nightmare22 · Post by **nightmare22** » Tue Oct 26, 2010 5:41 am

Take the emergency brake off. Don't ask me how I know. Admin note: put the car in reverse to keep the car from rolling.

nightmare22 · Post by **nightmare22** » Wed Oct 27, 2010 6:18 am

Did you get this fixed?

Pwrhouss · Post by **Pwrhouss** » Sat Oct 30, 2010 10:13 pm

YeahI realized the guide pins holding the pads on must be taken out. THey were rusted in there pretty bad. I removed them and got the pads and rotors off. I have never done brakes with a setup like this. Usually when I remove a caliper, it is one piece instead of two. THe problem now is I can't just get a new mounting bracket for the caliper but have to buy a complete new one.

keithvibe · Post by **keithvibe** » Sat Oct 30, 2010 10:42 pm

don't ya hate when you think it's going to be an easy job and turns out to be a hard job

Rear Disc Brakes on 03 Vibe GT

Rear Disc Brakes on 03 Vibe GT

Re: Rear Disc Brakes on 03 Vibe GT (Pwrhouss)

Re: Rear Disc Brakes on 03 Vibe GT (Pwrhouss)

Re: Rear Disc Brakes on 03 Vibe GT (Pwrhouss)