Accessory drive belt

[dzknmd1]

The belt listed for both of my Vibes is a six groove belt that is 72.5" long. Checking my parts inventory I happen to have on hand a six groove belt that is 73.5". I do not need to replace a belt at this time. However, I was wondering if anyone here has enough experience with this to advise me as to whether I can use the belt I have without any problems.

[ou.grizzly]

The belt in your inventory is too long, need to stick with the exact measurements, especially since belts tend to stretch over time. My thoughts, if you were to put that belt on, it would not stay on.

[dzknmd1]

Thanks for the quick reply. I thought that might be the answer but I wanted to run it past you guys anyway. I won't waste my time with it then.

[jake75]

Cut out an inch and use Krazy Glue to put it back together - I hear that stuff holds 2 tons.

[dzknmd1]

Quote, originally posted by jake75 »Cut out an inch and use Krazy Glue to put it back together - I hear that stuff holds 2 tons.Now that's thinkin' outside the box.

[jake75]

I try my best to keep you folks entertained!

[ou.grizzly]

Quote, originally posted by jake75 »I try my best to keep you folks entertained! Do you do parties?

[Whelan]

Go for the Goodyear Gatorback. I installed mine at around 50-60,000 and am currently at 116,000 with no wear on the belt showing.

[Water boy]

Quote, originally posted by Whelan »Go for the Goodyear Gatorback. I installed mine at around 50-60,000 and am currently at 116,000 with no wear on the belt showing.+1 on GatorBack

[ou.grizzly]

What is the warranty on the gatorback?

[Water boy]

I'm on various auto related forums and the GB has high recommendations and not one failure reported.In other words... it does not matter.

[dzknmd1]

The one I am going to cut out an inch and glue together happens to be a Dayco.

[zionzr2]

I have and recommend the GatorBack Belts as well