Getting a new header and..
-
04chargedvibe
- Posts: 150
- Joined: Wed Jul 22, 2009 1:06 pm
Getting a new header and..
So i have a dc sports header on the way and plan on gettin a custom exhaust. Just wondering if anyone wants to throw in their 2 cents on what they think.
-
star_deceiver
- Posts: 5802
- Joined: Fri Jun 05, 2009 1:49 pm
- Location: Airdrie, AB
Re: Getting a new header and.. (04chargedvibe)
I think you should do before and after dyno runs!!!
2021 Ram 1500 4x4 CCSB
2019 Ram 3500 4x4 CCSB srw 8HP75 (traded in - 04/15/21)
2016 Ram 3500 4x4 RCLB Dually w/stick (traded in - 05/10/19)
2012 Chevy Silverado 1500 Cheyenne 4x4 (Traded in - 03/30/16)
2009 Vibe. (Traded in - 12/12/12)
2019 Ram 3500 4x4 CCSB srw 8HP75 (traded in - 04/15/21)
2016 Ram 3500 4x4 RCLB Dually w/stick (traded in - 05/10/19)
2012 Chevy Silverado 1500 Cheyenne 4x4 (Traded in - 03/30/16)
2009 Vibe. (Traded in - 12/12/12)
I agree, what size exhaust are you planning? Also what all have you done to your vibe? Before and after EGT's would also be interesting to know...
*03 SIKVIBE*Performance mods in order:18x8 Konig illusion rims w/ falken ziex 235/40R18 tires~1.5" lowered TEIN S. tech springs~GM performance parts supercharger~TRD add-on ECU for S/C~Drop in spectre high flow air filter~Tripod center dash oil pres.,egt/boost, a/f guage pod~Homemade .5" custom S/C thermal intake spacer~1.9" aluminum S/C pulley~150 psi>530cc nozzle water/alcohol injection system~2.5" single cat proflow muffler opposite exit install
How yeah, where and for how much are you gettin the header/exhaust for/from??
*03 SIKVIBE*Performance mods in order:18x8 Konig illusion rims w/ falken ziex 235/40R18 tires~1.5" lowered TEIN S. tech springs~GM performance parts supercharger~TRD add-on ECU for S/C~Drop in spectre high flow air filter~Tripod center dash oil pres.,egt/boost, a/f guage pod~Homemade .5" custom S/C thermal intake spacer~1.9" aluminum S/C pulley~150 psi>530cc nozzle water/alcohol injection system~2.5" single cat proflow muffler opposite exit install
-
04chargedvibe
- Posts: 150
- Joined: Wed Jul 22, 2009 1:06 pm
Re: (sikvibe)
Well i guess i shoulda said its a plan in progress at the momonet. wanted to see what other ppl have/think i should do. Im getting the header from a buddy thats a parts manager at toyota. his gettin me a new gasket as well. gunna cost me about 225 thanks to him pulling strings lol. right now my vibes supercharged and i just put a dynomax muffler on it a while back and now i just wanna go ahead and get the whole thing done. any advice on what i should do is greatly appreciated
Re: (04chargedvibe)
2-1/4" diameter exhaust is ideal for the 1ZZ.
My Fleet:
'15 Ford Fusion AWD Titanium 2.0 Tutbo
'14 Lincoln MXZ AWD 2.0 Turbo
'14 Nissan Pathfinder AWD SL
'05 Pontiac Vibe AWD
'15 Ford Fusion AWD Titanium 2.0 Tutbo
'14 Lincoln MXZ AWD 2.0 Turbo
'14 Nissan Pathfinder AWD SL
'05 Pontiac Vibe AWD
-
04chargedvibe
- Posts: 150
- Joined: Wed Jul 22, 2009 1:06 pm
Re: Getting a new header and.. (04chargedvibe)
I meant to ask too about how much would i be looking at. Im going to start calling around to ask today but i wanna see what others have paid..
I had my buddy run 2.5 all the way back from behind the first cat and had a pro flow muffler installed..It only cost me $240 installed and runs great it does take a lil getting used to since its much louder now..I'm starting to get used to it, I think thats what he meant when he said it would get quieter...
*03 SIKVIBE*Performance mods in order:18x8 Konig illusion rims w/ falken ziex 235/40R18 tires~1.5" lowered TEIN S. tech springs~GM performance parts supercharger~TRD add-on ECU for S/C~Drop in spectre high flow air filter~Tripod center dash oil pres.,egt/boost, a/f guage pod~Homemade .5" custom S/C thermal intake spacer~1.9" aluminum S/C pulley~150 psi>530cc nozzle water/alcohol injection system~2.5" single cat proflow muffler opposite exit install