two questions on new hu install (09+ vibe)

Stereo, security systems, vehicle electronics, and electrical-related discussions
Post Reply
SpeedEng
Posts: 37
Joined: Sun Jun 28, 2009 4:05 am

two questions on new hu install (09+ vibe)

Post by SpeedEng »

installed a new hu into the vibe... but alittle lost on which wire is what..im tryin to figure out which wire is the antenna and which one is the sat antenna..
09+ base fog light install (no wire hacking)http://forums.genvibe.com/zerothread?id=37906
careckner
Posts: 8
Joined: Thu Mar 11, 2010 11:44 am

Re: two questions on new hu install (SpeedEng)

Post by careckner »

umm if your using a wiring harness, the wires should be labeled. oh by any chance are you using the GM onstar interface? I was going to put a new deck into my car and I didnt want to drop the bank on that stupid little box, just to keep onstar, which I dont use anyhow. P.S. Post pics...
SpeedEng
Posts: 37
Joined: Sun Jun 28, 2009 4:05 am

Post by SpeedEng »

im using a gmos-lan1 for the aftermarket hu.. btw you should really keep your eyes on ebay I picked mine up for 25 shipped... lan1 is not really that high in demand ... lan2 thats a different story
09+ base fog light install (no wire hacking)http://forums.genvibe.com/zerothread?id=37906
Post Reply