emergency

05baseabyss · Post by **05baseabyss** » Mon Jul 06, 2009 10:48 am

so my car is torn apart its almost 10 and i need to know how to run the wiring for an after market sub. i cant get it through the engine compartment and i am going through the doors. i really need help immediately. please!

ColonelPanic · Post by **ColonelPanic** » Mon Jul 06, 2009 11:25 am

I would wait until daylight and find a safe place to drill through the firewall instead.

northvibe · Post by **northvibe** » Mon Jul 06, 2009 1:10 pm

dont most cars have a rubber gasket thing in the firewall and you can just poke through that?

audiovibe · Post by **audiovibe** » Mon Jul 06, 2009 1:38 pm

http://forums.genvibe.com/zerothread?id=37070There is a couple pics of where I went through the firewall in this thread.Aron

05baseabyss · Post by **05baseabyss** » Tue Jul 07, 2009 4:54 am

i ended up having one of the audio places around here do it ... and $125 later and i come to find out that my amp doesnt work

Sublimewind · Post by **Sublimewind** » Thu Jul 09, 2009 12:16 am

If it helps at all, I just found out about these Cadence amps... They are the first gen with short heat sink fins, so they could possibly have over heating issues when pushed hard... but for the money they are VERY hard to beat.. Cadence is a good company with a good reputation.. you can purchase factory direct from Cadence as well, if you are worried about warentee issues... (If you look in the outlet store, they have some nice deals..)Hear is the deal link.. http://cgi.ebay.com/Cadence-Am...%3A30

emergency

emergency

Re: emergency (05baseabyss)

Re: (audiovibe)