quote:I Have to order another GT overlay. The one part of the T came off. From the grafxwerks site:quote:Exchanges on Defective/Worn Products:All products on GrafxWerks.Com are guaranteed to be free of defects - if for some reason your decal does not adhere properly, does not fit properly, or otherwise does not satisfy your expectations, please Contact Us. We stand behind our products 100%!
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
quote:E-Mail me and I'll get a replacement out to you.- RyanGrafxWerksYou guys at GW are awesome...you make great products, and truly stand behind them as you promise you would.Thanks for being a great company...Question: Do you guys have any plans for heat-shield labels (i.e. VVT-i, VVTL-i, 16 VALVE)?I bought some, but found them difficult to apply, and they don't seem such great quality.I like how you guys have them precut and pre-positioned on a sheet, so I just line them up, stick 'em down, and the whole thing sticks at once...
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
quote:Question: Do you guys have any plans for heat-shield labels (i.e. VVT-i, VVTL-i, 16 VALVE)?I'll look into the cost of purchasing the heat shield... I don't have a Vibe to work from, so depending on the cost, I'll see what I can do!Thanks for the kind words,- RyanGrafxWerks
quote:Question: Do you guys have any plans for heat-shield labels (i.e. VVT-i, VVTL-i, 16 VALVE)?I'll look into the cost of purchasing the heat shield... I don't have a Vibe to work from, so depending on the cost, I'll see what I can do!Thanks for the kind words,- RyanGrafxWerksI'd be glad to sell you guys my old one that I messed up painting on...Let me know if you're interested...we can negotiate a very reasonable price.
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
That's a good idea too about the swapping, except for the fact I already "decaled" mine...but perhaps I can use them as a set for when I repaint (which I'm sure will be sometime in the future)
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
quote:I'd be glad to sell you guys my old one that I messed up painting on...Shoot me an e-mail.- RyanGrafxWerksYou've got mail. As I mentioned in the mail, I don't have access to the GT cover, so I can't help you there...Not sure if the AWD cover is the same as the Base cover...anyone with an AWD know?
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
Just placed my order for Overlays!Reflective Black "Vibe" overlaysDark Red Refelctive Arrowhead overlaysReflective White Outlined genvibe.com decals :DI have presents for my baby when I get her back from the body shop! I'm giddy ^_^Thanks for the advice, Ryan! I can't wait to see how they look in person
Hey Ryan --Someone was asking me if the decals you guys make are removeable. I told him they are, cause I peeled one off once. Are they?We don't mean remove/restick. We know they won't go back on if they get pulled off -- but they can be removed without damaging paint or anything, right?
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
I got my overlays yesterday! :DRyan: You were right about the reflective black. It looks AMAZING! Depending on the angle you stand at, the "vibe" actually MATCHES the Shadow paint color and melts into the car itself. The dark red Pontiac arrows really go nice with that scheme as well, I almost think it matches the color of the badge better than would the bright red.Installation was easy (VERY easy, actually) and I love the way my GenVibe.com logos look on the side windows.I'm racing tomorrow so monday, after I wash the car, expect a full assortment of pics up of my overlays, and my painted heat-shield and fuse box (I was busy on Friday...heehee)
quote:they can be removed without damaging paint or anything, right?Yes, they can. Hairdryer/heat gun helps a lot.quote:I'm racing tomorrow so monday, after I wash the car, expect a full assortment of pics up of my overlays, and my painted heat-shield and fuse box (I was busy on Friday...heehee)Sounds great!- RyanGrafxWerks
quote:I'd be glad to sell you guys my old one that I messed up painting on...Shoot me an e-mail.- RyanGrafxWerksRyan Sent you an email week or two ago...did you get it?
YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!
Well after 8 months I'm finally starting to put on some of my GraphxWerks decals.To start with, the rear hatch inlay and arrowhead overlay. The arrowhead is a little off as you can see, but oh well it was my first attempt.
Attached files
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
And here's the arrowhead on the front bumper cover. This one went on a bit straighter. Interesting thing to note, a piece of the top corner of the original red plastic has cracked and now the overlay is holding it together.And both hatch and front arrowheads have turned a pinkish orange over the years so the overlays sure improve the lookMy remaining overlays will have to wait till after the weather improves
Attached files
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
Quote, originally posted by moongdss »Holy Threadsurrection!Looks nice Thanks!Let it never be said I don't try to find an existing topic before starting a new one! Here's a rear shot with be badge, 3rd stop light overlays, PONTIAC inlay, and arrowhead overlay.
Attached files
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header
Would you agree to debris acceptance? 2003 Vibe GTMods installed GM Top and Mid-Gate Spoilers, Cosmo CAI, TWM Short Shifter with Desert Eagle weighted shift knob, TWM Bronzoil Shifter Cable Bushings, Magnaflow Cat Back Exhaust, Unichip, Injen Billet Aluminum Engine/Sparkplug covers and oil cap, Optima RedTop Battery, Lineage Ground Wire KitAwaiting install: Energy Suspension Motor Mounts, DC Sports Header