Moving Fog Lights from factory location?

Body kits, spoilers, lights, and anything on the exterior of the vehicle
Post Reply
AKLGT
Posts: 11694
Joined: Thu Apr 24, 2003 2:57 pm

Moving Fog Lights from factory location?

Post by AKLGT »

Does anyone know if you can move the foglights from their original location? I want to move mine inward like on the Matrix so my CAI isn't shoved up against the back of the foglight. Plus, I think it would look better. I also want to know if you can place them behind the lower grill. I thought I read somewhere that someone has done this. anyone know who and how? what aobut the PIAA fog light kits for the VIbes and Matrix's I've seen? Help!
AKLGT1998 Subaru 2.5RS
KSNeptune
Posts: 451
Joined: Thu Nov 14, 2002 7:50 am

Re: Moving Fog Lights from factory location? (trdvibe)

Post by KSNeptune »

It shouldn't be impossible. All you'd have to do would be completely redesign the front bumper/fascia, engineer it to meet federal safety guidelines, and then make one for yourself. Go right ahead. When you have molds for your designed parts, make several copies of each part. You could probably sell several, assuming your design is appealing.KSNeptune
Post Reply