Alternate location for fusebox? Help!

[THE VIBERATOR]

Hey everyone I have a 2003 fwd vibe and I am about to replace my intake filter with a bigger one. Thing is, I will need to find a different location to put my fusebox. Is this even possible? And if so, where should it go?

[keithvibe]

photos of this filter your talking about?

[breezd]

what are you talking about by replacing your filter with a bigger one? Get a CAI, no relocation of the fuse box necessary!

[kevera]

I don't know why you'd want to move it.Get a CAI or SRI with a good filter and call it done.Bigger isn't always better.

[BlueCrush]

Quote, originally posted by THE VIBERATOR »Hey everyone I have a 2003 fwd vibe and I am about to replace my intake filter with a bigger one. Thing is, I will need to find a different location to put my fusebox. Is this even possible? And if so, where should it go?You shouldn't need to move your fuse box. I'm assuming you are using a short ram. I would just cut the short ram pipe down so it will fit. Pics would be nice of this monster filter.

[THE VIBERATOR]

Lol I will put a pic up later, with a pic of my destroyed, blackened, battered old filter lol. The bigger filter was a short ram filter for my exact same intake, but meant for a celica. It is about an inch bigger than my current filter, and since I have a throttle body spacer, there is no room for a bigger filter unless i cut the piping or move the fusebox. And since winter is coming up, i dont quite want a CAI....yet. My current filter is actually barely touching the fusebox, so i literally have NO room for the new one unless an adjustment is made.I'd rather steer clear of making a cut, since i neither have the tools or the experience to do so. A safer option would be to try and find another location for my fusebox.Such a tiny project lol, yet so confusing

[joatmon]

I can't imagine any circumstances where it would be worth relocating the fuse box to put a bigger air filter in. You'd be better off going back to stock on the intake. Just buy a filter like the one you wasted.

[keithvibe]

Quote, originally posted by THE VIBERATOR »I'd rather steer clear of making a cut, since i neither have the tools or the experience to do so. A safer option would be to try and find another location for my fusebox.Such a tiny project lol, yet so confusingnow thats funny!you think taking a hacksaw to your intake to trim off 1inch would be harder than extending electrical lines/relocating your second fuse box.LOLI would say like everyone else here cut the intake down.. i have personally cut about 4inches off mine. 3inches off the filter end and 1inch off the throttle body side.

[THE VIBERATOR]

thats actually not a bad idea. I could try cutting the filter down. I'll give it a whirl lol

[breezd]

I didn't even have to cut anything with my CAI. The filter sits kinda tight against the fog light, but it doesn't harm anything.

[THE VIBERATOR]

I dont have a CAI. I have a K+N short ram (the problem is the spacer, really). I just cut down the filter exactly 1 inch, and its still just tight enough that it won't completely fit on the tubing, so tomorrow i'm going over to my buddies house and we're cutting down the tubing an extra half inch. Should be fun!