Need Parts Help

Discuss any maintenance you've done to your Vibe & Matrix and ask how to perform maintenance on your vehicle
Post Reply
thoughtdegree
Posts: 13
Joined: Wed Sep 21, 2005 5:18 am

Need Parts Help

Post by thoughtdegree »

I need help figuring out a part number for this push-in-retainer clip. I think that is what it is called. If you can see the attached picture you will notice that the pieces on the back are broken.

Attached files
thoughtdegree
Posts: 13
Joined: Wed Sep 21, 2005 5:18 am

Re: Need Parts Help (thoughtdegree)

Post by thoughtdegree »

These were located on the plastic shroud that is under the car right in front of the oil pan area.

Attached files
4azdmunky
Posts: 445
Joined: Fri Dec 23, 2005 11:57 am

Re: Need Parts Help (thoughtdegree)

Post by 4azdmunky »

I don't know the exact part number, however Checker and Autozone have similar ones in their bolts/screws area. They are marked as plastic rivets (or something like that) and are also marked as GM. They are not exactly the same, but they work the same and fit. I ended up replacing all of mine over time with them and never had an issue.
joejoev

Re: Need Parts Help (thoughtdegree)

Post by joejoev »

I think the GM part # is 88970767.I had to replace a few of those myself and ended up using OEM front grille retainer clips (part #94853733) since I had an extra bag of them. They don't hold as tight as the original retainers, but they do the job.
Post Reply