LED Tie Together?

[Whelan]

http://cgi.ebay.com/ebaymotors...:US:1I am looking to purchase these for a little project I am working on. Is it possible to tie them together so that they get power from one source. Let's say a 12V automotive bulb where you cut the connector and just crimp the wires altogether. 2+ to the 1+ and 2- to the 1- on the car side. Would they work fine?

[nygiantzz1]

Wiring them in parallel should work fine. As you said, + to +, - to -, to any 12V source should be OK. Try to solder them if possible, stronger than crimping them.