Any members have a Borla exhaust system with pics?

Triton · Post by **Triton** » Thu Apr 03, 2003 10:21 pm

I am seriously considering the Borla exhaust system for my Vibe GT. I know that there are a couple of members who have this already. I would like to see a pic of it installed if anyone has them. If you do, please post them here for all the members to see. Thanks!

Stang2Vibe · Post by **Stang2Vibe** » Fri Apr 04, 2003 2:18 am

I thought the members were saying that Borla was in the process of making an exhaust system for the Vibe, not that they already had one. For now, I'm going the cheaper route. My Flowmaster 60 Series should be here any day now! I just wanted mostly to change the exhaust pitch. Changing just the muffler won't have very much effect on HP unless it was a particularly restrictive design, in which case HP would be lost.

Triton · Post by **Triton** » Fri Apr 04, 2003 2:44 am

quote:I believe the exhaust end is more oval shaped. The Thermal R&D is round like the stock exhaust, looks much better. But price, is another factor. I didn't even see that it is an oval tip! I don't think that would look right. I thought it was a 4" round tip. The price for a Borla system is about $368 shipped from PTuning. The Thermal R & D is $473 shipped. There is a big price difference, but it may be worth it for a round tip. That's what I am really looking for. I just like the way my tip looks now. I have the polished tip from GM on there now.

NovaResource · Post by **NovaResource** » Fri Apr 04, 2003 3:03 am

quote:Triton, I hear Borla is a Great Exhaust, but one thing I do not like about it I believe the exhaust end is more oval shaped. The Thermal R&D is round like the stock exhaust, looks much better. But price, is another factor.The tip is not oval, it's round. It just looks oval because of the angle the picture was taken and because the tip is angled instead of flat.

Triton · Post by **Triton** » Fri Apr 04, 2003 3:13 am

That's what I though as well Scott. But under that picture on PTuning's website, it says Includes 4" oval tip.Here is what Borla's website says when you pull up the Vibe's system:Product DescriptionT-304 STAINLESS STEEL Product TypeCAT-BACK SYSTEM Tip Style(s) (legend)S OV RL AC Tip Exit(s) (legend)RI believe the OV under tip style stands for oval. And here is a sample pic they show: It looks slightly oval to me, but I really can't tell. I emailed Borla just a little while ago to see what they say. I will let you know.

millster · Post by **millster** » Fri Apr 04, 2003 3:21 am

It is an oval tip. Here's a link to another discussion of the Borla exhaust on MatrixVibe.net. Scroll down to the end and there are some pretty good pics of it installed on a Matrix.http://www.matrixvibe.net/forums/viewtopic.php?t=2300

Triton · Post by **Triton** » Fri Apr 04, 2003 3:22 am

Thanks millster. I will take a look there as well.

NovaResource · Post by **NovaResource** » Fri Apr 04, 2003 3:31 am

It's oval because it's an angle cut. When you cut a round tube on an angle it creates an oval however the tube is still round. I'm fairly sure that Borla tip is round when looking at it straight on.

NovaResource · Post by **NovaResource** » Fri Apr 04, 2003 3:42 am

quote:It is an oval tip. Here's a link to another discussion of the Borla exhaust on MatrixVibe.net.That oval allright but not much. I don't think it looks so bad in the opening.

Triton · Post by **Triton** » Fri Apr 04, 2003 3:46 am

quote:That oval allright but not much. I don't think it looks so bad in the opening.I don't think it looks bad on the Matrix. I wonder what it would look like on a Vibe.

rasermon · Post by **rasermon** » Fri Apr 04, 2003 4:35 am

quote:That oval allright but not much. I don't think it looks so bad in the opening.I think it actually looks good.

Triton · Post by **Triton** » Fri Apr 04, 2003 4:41 am

The cut out for the exhaust tip is a little different on the Matrix than the Vibe. I do like the way it looks with the Matrix. But I'm not sure about the Vibe. It seems like one that is round would look better on a Vibe.

rasermon · Post by **rasermon** » Fri Apr 04, 2003 4:59 am

Member (robdog) installed a Borla. Maybe he could post a pic for us.

Triton · Post by **Triton** » Fri Apr 04, 2003 5:04 am

That would be cool rasermon.Does anyone know what the gains in horse power are for either exhaust system if there is any?

MiamiVibe · Post by **MiamiVibe** » Sat Apr 05, 2003 6:06 am

Some pics and an SOUND clip would really help

robdog · Post by **robdog** » Mon Apr 07, 2003 3:44 am

I have the Borla exhaust, the tip IS ovalHere is a pic attached. It is snowing out so it may not be a real good pic but you will get the general idea.

Attached files

robdog · Post by **robdog** » Mon Apr 07, 2003 4:33 am

Attached Here is the AEM Short Ram setup as well along with the engine cover I painted.

Attached files

Triton · Post by **Triton** » Mon Apr 07, 2003 10:40 am

Thanks for the contribution robdog! That helps a lot as to which exhaust system I want to install on my Vibe.

piffy · Post by **piffy** » Mon Apr 07, 2003 10:47 am

There seems to be a difference in the rear fascias of rasermon's blue vibe and robdog's black one. Did anyone else notice that? Any insight about the difference between the two? Does the blue one have the sport package (extended fascias?)Thanks!

Triton · Post by **Triton** » Mon Apr 07, 2003 10:51 am

quote:There seems to be a difference in the rear fascias of rasermon's blue vibe and robdog's black one. Did anyone else notice that?We all noticed that. That picture that rasermon posted was of a Matrix with a Borla system installed in it. He linked the picture from a post on MatrixVibe.net of someone that had installed the system already. I hope this helps. Follow this link and take a look: http://www.matrixvibe.net/forums/viewtopic.php?t=2300

piffy · Post by **piffy** » Mon Apr 07, 2003 8:49 pm

Ah ha. I didn't follow the link to matrixvibe.net to look at the matrix. I guess it would have been a little clearer had I done that.Thanks guys.

PhantomII · Post by **PhantomII** » Wed Apr 23, 2003 6:05 am

Robdog,what did you use to paint your engine cover red? looks good!

robdog · Post by **robdog** » Wed Apr 23, 2003 9:50 pm

I used a spray paint by DuPont formulated for plastics. Any brand would work if it is made for this.

Any members have a Borla exhaust system with pics?

Any members have a Borla exhaust system with pics?

Re: Any members have a Borla exhaust system with pics? (Triton GT)

Re: Any members have a Borla exhaust system with pics? (silverawd26)

Re: Any members have a Borla exhaust system with pics? (silverawd26)

Re: Any members have a Borla exhaust system with pics? (NovaResource)

Re: Any members have a Borla exhaust system with pics? (Triton GT)

Re: Any members have a Borla exhaust system with pics? (millster)

Re: Any members have a Borla exhaust system with pics? (Triton GT)

Re: Any members have a Borla exhaust system with pics? (millster)

Re: Any members have a Borla exhaust system with pics? (NovaResource)

Re: Any members have a Borla exhaust system with pics? (NovaResource)

Re: Any members have a Borla exhaust system with pics? (rasermon)

Re: Any members have a Borla exhaust system with pics? (Triton GT)

Re: Any members have a Borla exhaust system with pics? (rasermon)

Re: Any members have a Borla exhaust system with pics? (silverawd26)

Re: Any members have a Borla exhaust system with pics? (NovaResource)

Re: Any members have a Borla exhaust system with pics? (robdog)

Re: Any members have a Borla exhaust system with pics? (robdog)

Re: Any members have a Borla exhaust system with pics? (robdog)

Re: Any members have a Borla exhaust system with pics? (piffy)

Re: Any members have a Borla exhaust system with pics? (Triton GT)

Re: Any members have a Borla exhaust system with pics? (robdog)

Re: Any members have a Borla exhaust system with pics? (PhantomII)