Installing and securing front splash guards

~MRVIBE2006~ · Post by **~MRVIBE2006~** » Tue Dec 05, 2006 9:26 pm

Hey there. I know, this is probably beating a dead horse but please bear with me. Was trying to install my front splash guards the other day but couldn't get the bottom screw/bolt/rivet out. Any secret on how to do this? Also, I noticed that the top screws were a little loose when I installed them with the splash guards. Has anyone replaced them with a larger screw? Or is there a way to secure them a little better. I seem to remember seeing a pic where someone used a couple self-tapping screws to secure the guards but cant find it (yes, I did use search). Thanks in advance for the help. I've got the rear ones on now, just want to get the front ones on before the snow begins to fall!

mcgusto82 · Post by **mcgusto82** » Wed Dec 06, 2006 7:23 am

This post is useless without pictures!! lolothers have said the same thing.

~MRVIBE2006~ · Post by **~MRVIBE2006~** » Fri Dec 08, 2006 9:35 pm

Im sorry that I don't have a picture. But its the bolt/rivet on the bottom of the car. You have to remove it to install the supplied plastic push in bolt. I guess I could install it without taking out that bolt but would feel better taking it out and replacing it. Any help would be appreciated.

Installing and securing front splash guards

Installing and securing front splash guards

Re: Installing and securing front splash guards (~MRVIBE2006~)

Re: Installing and securing front splash guards (mcgusto82)