Exhaust Sound Clips - Finally!!!

[BlueCrush]

Here are a few sound clips of my exhaust. The file sizes are 2.5MB to 9.2MB so please be patient while it is loading.Here is the exhaust set-up I have on my 2005 Pontiac Vibe AWD:Stock Header (w/ hollowed out precat)2-1/4" downppipeMagnaflow High Flow Cat2-1/4" exhaust Piping24" long x 5" diameter resonator14" long Dynomax Super Turbo Mufflerhttp://media.putfile.com/Idle--Revhttp://media.putfile.com/Idle--Rev--2http://media.putfile.com/Acceleration-154http://media.putfile.com/Acceleration-248http://media.putfile.com/Acceleration-348UPDATE: New Sound Clips with a resonator change from a 24"x5" to a 48"x5" and a muffler change from a 14" long to a 20" long Dynomax Super Turbo Muffler (same brand as before just longer) The extra 6" makes a nice difference (quietens it down a bit):Again, please be patient while it downloads (Files are 8MB & 3 MB)http://media.putfile.com/Vibe-Idle--Rev ... celeration

[millster]

Nice! I love the rumble at idle. That's a good sounding setup! Pretty loud too.

[BlueCrush]

Thanks, Millster. I love the idle, too.It is a little loud but still quieter since I switched from a 12" to a 24" resonator.

[damronjr]

Sounds awesome Brian!

[Lancer]

I like it! Wish mine was closer to yours in the noise level. I had to think for a minute why your tubes are only 2 1/4". Then I remembered that you have AWD. Hehe! I gotta find a way to record mine for ya. I also got my first cat hollowed out, second cat removed, an inline muffler infront of the stock resonator, and a Borla axle back. All tubing is now 2 1/2" straight through fromt the first cat.It is LOUD!! and very low toned.I told my guy as long as I can still hear my s/c at WOT I'll be happy. But now I'm considering another inline muffler after the resonator.It's suprising how much a cat. converter quiets things down.

[jasonvibe]

If I had a second car. I would do as Bluecrush. But I don't. Guess it's better for now to be saying all the time, What? NICE...

[Vibeman GT]

Just out of curiosity, what is the part number of your Dynomax Super Turbo Muffler ??

[BlueCrush]

Dynomax Super Turbo Part#17736

[JustinVGT]

Sounds great Brian! I really like the idle. I should get some video clips of mine sometime and put them on. I hadn't thought about that in a long time.

[BlueCrush]

I have updated my first post with more sound clips after changing out my 24"x5" resonator to a 48"x5" resonator and my 14" long muffler to a 20 long muffler. (Same brand and model)

[wilson1]

What resonator did you use?

[wilson1]

Also, what was the model # for the 20" you used. The 17736 comes up 14". Thanks!!!

[BlueCrush]

Quote, originally posted by wilson1 »What resonator did you use?It is a non name brand resonator that is 24" long and 5" dia.Quote, originally posted by wilson1 »Also, what was the model # for the 20" you used. The 17736 comes up 14". Thanks!!!The 20" (17749 or 17747) only comes with 2-1/2" dia inlet and outlets. If you are just going to replace the muffler then you will have to use the 14" model since your stock pipe is only 1-3/4"-2" in diameter.