CAI installation???

Mrizzle05 · Post by **Mrizzle05** » Mon Feb 13, 2006 11:20 pm

Hey there... i finally got my intake yesterday. Woo-Hoo... but i wanted to make sure when i put it in i dont end up with extra bolts or something. I have experience with putting them on but i have a VIBE now... so i wanted to see if anyone has a insatllation sheet they can email me or a thread i can look at so i know what i need to do to get my intake on. Plus i want the cheat sheet so i can put in on as fast as possible*On another note i finally got my genvibe stickers and my 3rd brake light sticker... ill post some pics up as soon as i can.Thanks a million in advance!!!

scherry2 · Post by **scherry2** » Tue Feb 14, 2006 12:29 am

http://homepage.mac.com/twilkers/PhotoAlbum10.html here is one with picsthe slide show was good too.

Mavrik · Post by **Mavrik** » Tue Feb 14, 2006 3:05 am

Don't blow your MAF is all I can say. I blew mine when I connected the battery with the MAF already connected. My success afterwards has been unplugging the MAF before disconnecting the battery and then plugging the MAF back after connecting the battery. For some reason I got a power spike through the first time when I connected the battery after having the MAF connected.... it sucked.

Mrizzle05 · Post by **Mrizzle05** » Tue Feb 14, 2006 3:13 am

Sorry to hear that... one ??? im not to familiar with all the Abbrv.... whats MAF?

Mrizzle05 · Post by **Mrizzle05** » Tue Feb 14, 2006 3:18 am

Ahhh!!!! i saw that one when i looked at my engine last night... i was gonna attempt to put it in but, the vibes engine layout and new nic-nacs are a lil more techincal than my old cavalier.Thanks for the input... ima put mine in tonight hopefully... ill post pics tomorrow!

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 1:15 am

Noooooo! had a bad night last night...Well come to find out im really car illiterate now. i was like 85% done with putting my cold air intake in when i couldnt figure out how to put the Black "h" looking bracket onto my car and then use the lil cushioned spacer to raise my fuse box.then i cant understand how on the 05 theres a like 1" tube coming outta the engine block cover... where am i suppose to use the like 1/4" tubing provided. I got so mixed up in how to get it on i cursed and yelled and threw lots of tools and gave up till tonight hopefully.NEED HELP!!! if theres anyone that has better pictures or can better explain how to put those on i would GREATLY appriciate it.Thanks for any help and mental support!!!

damronjr · Post by **damronjr** » Wed Feb 15, 2006 1:30 am

You're probably gonna need someone with esperience with an 05 to help you out, most of us who have done it are 03-04 which are a little different. Hope you get it done though. Have you tried asking the company who's CAI it is for better instructions?

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 1:44 am

No i havent yet... i was hoping the install tips could guide me through cuz the one i got didnt come with them of course!!!But of course i got it off ebay so it, might be a mission to get anything from the seller.Well see... if not ima get the cosmoracing one... if they ever get any in. its been like 3 weeks already

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 4:12 am

So come to find out im impatient and ignored the fact that my intake could be for the 04 and older... but what caught my eye was 02- 05... and for some reason i was like "sold" so now im trying get a friend to help me figure out if it is for sure or not... if thats the case any one interested in a polished CAI for the 04 and older???_Im trying to get ahold of cosmoracing... cuz there lagging way bad on getting more cai in stock for my car... im getting impatient.Thanks for everyones help!!!You guys ROCK!!!

Mavrik · Post by **Mavrik** » Wed Feb 15, 2006 4:40 am

Sorry about your bad luck. I was just about to ask what differences there was in the 04 and newer as a friend of mine wants to install one on his newer Matrix. Guess they are different.

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 5:00 am

Yeah supposedly... i heard they werent different elsewhere... but i believe they are. not sure how, but yeah im the fool!But im trying to email cosmo... cuz they havent had any for like 3 weeks now. I wanna special order one. I want one soooo bad now that i thought i had it.

Mavrik · Post by **Mavrik** » Wed Feb 15, 2006 5:57 am

I want to take a look under the hood of my friend's base Matrix and see whats there. I know there was some differences with vac lines and what not with the GT Vibes.

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 6:38 am

well the biggest thing i saw was the hose coming outta the engine cover... on the older base vibes there different... so when i put my so called 05 cai in... i had that lil tube and like a 1" tube from the engine.Dunno just gonna wait for the cosmo intake if they ever respond or get more in stock this year!

burkeyro · Post by **burkeyro** » Wed Feb 15, 2006 7:19 am

I don't think your problem is all that. What CAI do you Have? I looked at an '05 and the only difference that I saw was there is a hose that pluggs into my Injen CAI on my '03, It appears that they took that hose and it now goes into the TB on the '05 instead. Looks to me that all you would have to do is Block the 1" "nipple" with a Rubber VAC stopper (Saw one in a variety pack at autozone) clamp it down with a hose clamp or zip tie and be on your way.

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 7:45 am

Yeah! well if so where does that lil tubing that comes with the CAI go after hooked up to the intake...I got mine off ebay... that one velocitymax... or what ever. Its for the matrix base... but since its our sister car its the same for us... and it said vibe too so im not sure...So why do i have to plug that off... dont mean to question anyones knowledge isnt there a purpose for it or whats it for???Sorry just dont wanna break my baby!!!

burkeyro · Post by **burkeyro** » Wed Feb 15, 2006 8:46 am

I'm going looking on E-bay - I do believe that you got all the stuff for 02-04 and some '05s what that kit - I do not believe you need that "Extra" tube for yours if I remember correctly it was to extend the 02-04 hose. by chance is thre any way you could get a Picture of your TB? if I saw which one you have I'll be able to tell you real quick what you need to do.

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 9:00 am

yeah give me about an hour or so just got really busy at work... it would be awesome if i could get it on tonight...thanks a million for your help

burkeyro · Post by **burkeyro** » Wed Feb 15, 2006 9:09 am

no problem - anytime - I remember hearing that the Early '05 models had the same TB as the 02-04 - then they changed it. so essentially '05 model year Vibes have 2 different TB's. (If Memory Serves)

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 9:30 am

how do i put a pic on here... it wont let me or i dont know how

burkeyro · Post by **burkeyro** » Wed Feb 15, 2006 9:51 am

E-mail it to me - rob.burkey@mkii-supra.com

Raven · Post by **Raven** » Wed Feb 15, 2006 11:42 am

Early '05 was cable throttle, later '05 is drive by wire. I have an '06 with a Cosmo CAI. The small fitting on the CAI has a plastic cap and there is a larger one for the big hose about 1" from the throttle body. Included in the kit is a hose one size smaller than the one on the car which fits inside and extends it long enough to connect to the CAI. If you can drill a hole and attach a larger fitting to the CAI, you should be able to use it.

Toasted7 · Post by **Toasted7** » Wed Feb 15, 2006 11:56 am

I tried drilling mine and screwed the whole thing up... now I'm stuck with a CAI that won't fit and I'm out that $$$. My 05 is drive by wire with the new TB... I can't seem to find a CAI that will fit that without doing some modification to the CAI itself.

burkeyro · Post by **burkeyro** » Wed Feb 15, 2006 2:17 pm

Ok - I looked at the pictures - seems a little different, I'm going to the dealership tomorrow to pick up some lug nuts - I'll look at the '05's they have there. There should be a way to get this working without too much trouble - I saw the Velocity one that you got. Looks pretty standard issue. Toasted - Maybe we can get together and take a look at your's see if there isn't something we can do to get it working for you. "DUCK TAPE WORKS WONDERS" Just kidding

Mrizzle05 · Post by **Mrizzle05** » Wed Feb 15, 2006 2:57 pm

thanks a lot... yeah its pretty basic... so just let me know what you find out... if its too much trouble im just gonna take my loss and sell that intake and wait for the cosmo

Raven · Post by **Raven** » Wed Feb 15, 2006 8:39 pm

Quote, originally posted by Toasted7 Â» My 05 is drive by wire with the new TB... I can't seem to find a CAI that will fit that without doing some modification to the CAI itself. Cosmo Racing makes one for DBW but they are out of stock right now. I got mine about 3 months ago. There were no modifications necessary to make it fit.

Mrizzle05 · Post by **Mrizzle05** » Thu Feb 16, 2006 12:15 am

Yeah i gotta wait... AGIAN!!! for cosmo.. they lag on getting more in... ive been waiting and now i gotta get rid of the 04 and below CAI!Well like they say "you live and you learn"

burkeyro · Post by **burkeyro** » Fri Feb 17, 2006 3:11 am

Sorry Mrizzle - I didn't get to the dealership yesterday, I'm 99.5% sure that as long as the Angle is correct to connect to the TB, you just need to block off the "Nipple" and do not need to use the "Extra" hose. That is, IF you even want to mess with this one anymore.

Mrizzle05 · Post by **Mrizzle05** » Fri Feb 17, 2006 3:24 am

naw... just gonna wait for the cosmo... dont wanna f**k my car upthanks for the help

CAI installation???

CAI installation???

Re: CAI installation??? (Mrizzle05)

Re: CAI installation??? (scherry2)

Re: (Mrizzle05)

Re: (Mrizzle05)

Re: (Mrizzle05)

Re: (Mrizzle05)

Re: (Mrizzle05)

Re: (Mrizzle05)

Re: (burkeyro)

Re: (Sunny)

Re: (Toasted7)

Re: (Mrizzle05)