Does anyone have the AEM short ram intake for their Vibe GT?

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Does anyone have the AEM short ram intake for their Vibe GT?

Post by QUIKAG »

If so, how do you like it? I'm a bit afraid of hydrolocking my car with the long tube air intake as it happened with an AEM cold air intake on my old '93 Honda Del Sol Si. Anyway, does the short ram intake provide good sound and any noticeable power gains?
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
NY Pete
Posts: 267
Joined: Fri Jan 03, 2003 4:50 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by NY Pete »

How deep was the water you drove through in your old car?
'02 Jetta 1.8T Silver Arrow/Black Leathuh - Neuspeed turbo inlet pipe, 17" VW Exor wheels, euro Bora tails, Neuspeed Sofsport Springs, Bilstein HD's, Da'lan hitch'03 20thAE GTI #3494 Imola Yellow/Black Recaros - Omori/AWE boost gauge, HPA Motorsports Short shifter, Neuspeed 28mm rear sway, REVO programming, Neuspeed turbo inlet pipe, FK Badgeless grille, Kamei eyelids and one big fat grin
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (NY Pete)

Post by QUIKAG »

I actually sold the car to my ex-girlfriend at the time and warned her of the potential problem with high water. Obviously, she didn't listen. I think she hit a pothole which submerged the intake enough to ingest water into the engine.
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
Flip-Side
Posts: 1020
Joined: Fri Sep 13, 2002 10:50 am
Location: Detroit, MI

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by Flip-Side »

quote:I'm a bit afraid of hydrolocking my car with the long tube air intake as it happened with an AEM cold air intake on my old '93 Honda Del Sol Si.AEM now sells a bypass valve that prevents water from getting sucked in. This will let you keep the advantages of a CAI, and keep your engine "water" protected.
Employ your time in improving yourself by other men's writings, so that you shall gain easily what others have labored hard for.
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (Flip-Side)

Post by QUIKAG »

Any link to any information on this bypass valve? Coincidentally, I ordered the full AEM CAI today, so I would like to protect the car from hydrolock.
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
Flip-Side
Posts: 1020
Joined: Fri Sep 13, 2002 10:50 am
Location: Detroit, MI

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by Flip-Side »

quote:Any link to any information on this bypass valve? This is the AEM intake page http://www.aempower.com/induction.htm You will find the bypass valve near the bottom.
Employ your time in improving yourself by other men's writings, so that you shall gain easily what others have labored hard for.
DopeVibeGT
Posts: 1027
Joined: Thu Oct 31, 2002 6:35 am
Location: PA

Re: Does anyone have the AEM short ram intake for their Vibe GT? (Flip-Side)

Post by DopeVibeGT »

Key thing to not getting hydrolock is knowing where you are driving and it's a Vibe, not a submarine.
Pictures of my ride!!'03 Vibe GTMy AED GA!Work in progress
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by BigWill »

how much did it cost you? And is this it?
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
CaCathy13
Posts: 185
Joined: Tue Dec 10, 2002 12:41 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by CaCathy13 »

I have the AEM on my Vibe GT and it is AWESOME.The sound you get when you hit lift is unreal...and the power gain is quite noticable. Mine had a big asss sticker on it though...you can see pics at http://www.mitro.net and click on the Vibe Vault. Here is the thread about my CAI... http://forums.genvibe.com/zerothread?id=2060
CathyWhen this baby hits 6.000rpm's, you're gonna see some serious sh*t-Got Lift?'03 Neptune Vibe GT: SLP Hood, AEM CAI, Thermal R&D exhaust, Unorthodox underdrive pullies, K&N filter, G-Racing 17' Mito's, TEIN Springs, yellow calipers, GrafxWerks, Silverstar's, XM, Infinity basslink-more mods to come!http://www.mitro.net/vibe
CaCathy13
Posts: 185
Joined: Tue Dec 10, 2002 12:41 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by CaCathy13 »

I think the Vibe is too high off the ground to be effected by any potholes filled with water...i mean, you'd have to drive through a lake to really be effected, don't you think? There is plenty of ground clearence
CathyWhen this baby hits 6.000rpm's, you're gonna see some serious sh*t-Got Lift?'03 Neptune Vibe GT: SLP Hood, AEM CAI, Thermal R&D exhaust, Unorthodox underdrive pullies, K&N filter, G-Racing 17' Mito's, TEIN Springs, yellow calipers, GrafxWerks, Silverstar's, XM, Infinity basslink-more mods to come!http://www.mitro.net/vibe
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (CaCathy13)

Post by QUIKAG »

Thanks for all the info. I got it for $217 shipped, so I think I got a decent deal. The AEM worked wonders on my SOHC VTEC Del Sol. I then had an Iceman on my DOHC VTEC Prelude and that worked even better, finally the cold air intake on my Corvette really woke up the big V8. I'm excited about getting the intake put on, I loved the sound it made when I hit VTEC on the Prelude, I'm sure the sound is going to be similar and the power gain noticeable on my Vibe GT when I hit the high lift cam.
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by BigWill »

I was thinking about getting a short arm in my Vibe too, but I didn't know. Because they are soooooooo cheap. Dose anyone know how many horses I will get from a short arm?
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (BigWill)

Post by QUIKAG »

You won't get as many horses with a base model and the short ram. It will be worth a few horsies as long as you don't heat soak too bad (i.e. hot day, hot under hood, no air circulation). The sound will be worth the price of admission though!!
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
robdog
Posts: 372
Joined: Mon Dec 30, 2002 1:36 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (QUIKAG)

Post by robdog »

Big Will, I have the AEM short Ram and I noticed a big power increase along with excellent sound, especially when lift hits. I work in Trenton if you ever want to see it and hear it.
03, Abyss monotone GT, 6 disk changer, moon and tunes, Cargo mat/nets, power package, side airbags, AEM Short Ram Intake, Borla exhaust , 35% tint all around, F1 strut tower brace, debadged, 17" Excel rims w/ federal ss595 tires.
Triton
Posts: 2198
Joined: Wed Aug 14, 2002 1:24 am

Re: Does anyone have the AEM short ram intake for their Vibe GT? (Flip-Side)

Post by Triton »

quote:AEM now sells a bypass valve that prevents water from getting sucked in. This will let you keep the advantages of a CAI, and keep your engine "water" protected.I called AEM about this bypass valve and the current design of the intake for the Vibe/Matix is not designed to accomadate a bypass valve. According to what the technician told me, it is almost impossible to get hydrolock with this intake unless you completely submerge the filter, which in the Vibe would mean you would have to practically drive into a lake. A mist or a couple drops of water aren't going to hurt the motor or intake at all. At least that is what I was told from AEM.
***SOLD***2003 Vibe GT Monotone Neptune - Inaugural October 2004 Vibe of the Month***SOLD***

Now the proud owner of Titanium Silver 2012 Kia Optima SX
Post Reply