Corvette exhaust tip on my Vibe!

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
ToolGuy
Posts: 3584
Joined: Wed Jul 28, 2004 3:38 am

Corvette exhaust tip on my Vibe!

Post by ToolGuy »

I was just messing around over the weekend and thought about something... I was looking at the old exhaust from my Vette and said I bet one of the 4 tips will fit my Vibe. I had to cut the tabs off the tip to install it on the Vibe but I think it looks good! Better than the GM Vibe tips you can buy...Two saw blades later since stainless is so hard and it worked!

Attached files
ToolGuy
Posts: 3584
Joined: Wed Jul 28, 2004 3:38 am

Re: Corvette exhaust tip on my Vibe! (MiVibe-ToolGuy)

Post by ToolGuy »

The tip is held on just by compresion force since the new tip is not round. There is a drain hole on the tip and I could have run a screw through it to the old Vibe tip to hold it in place even more but it does not need it.I have a pic of the tip before I cut it but it is too large to post. EDIT: Thanks to Rasermon here it is...

Attached files
scherry2
Posts: 4073
Joined: Wed Mar 26, 2003 8:02 am

Re: Corvette exhaust tip on my Vibe! (MiVibe-ToolGuy)

Post by scherry2 »

I remember when I went into the dealer parts counter, and they had 2 Vibe ehaust tips setting there. I asked and the parts guy said he ordered them for a salesman's vette and they found out they were to big. I bought 1 as a used part. now its in my attic with my stock exhaust.
rasermon
Posts: 2156
Joined: Mon Jul 29, 2002 10:07 am

Re: Corvette exhaust tip on my Vibe! (MiVibe-ToolGuy)

Post by rasermon »

It looks just like my Borla.
Satellite 03 GT Retirement ----> Moderator for Genvibe.com 2002 - 2007 A fact of life: After Monday and Tuesday even the calendar says (removed)
ToolGuy
Posts: 3584
Joined: Wed Jul 28, 2004 3:38 am

Re: Corvette exhaust tip on my Vibe! (scherry2)

Post by ToolGuy »

Quote, originally posted by scherry2 »I remember when I went into the dealer parts counter, and they had 2 Vibe ehaust tips setting there. I asked and the parts guy said he ordered them for a salesman's vette and they found out they were to big. I bought 1 as a used part.Right, the Vette tips are smaller than the Vibe... Going from a Vibe tip to a Vette stock tip you would get what the dlr told you. My tips are actually aftermarket for the Vette since my year Vette did not have tips. Not until 2000 did GM put small tips on the car...
ArcsVibe
Posts: 5784
Joined: Tue Jul 29, 2003 10:12 am

Re: Corvette exhaust tip on my Vibe! (MiVibe-ToolGuy)

Post by ArcsVibe »

So are you going to send me a spare one to "test"?
Genvibe Global Moderator
MOTM September 06 & July 09
VOTM April 06
Neptune Vibe 2003 (7-10-2003 - 9-14-2010 vendu/sold)
Mazda3 GX 2008 (9-14-2010 - 5-09-2014 vendu/sold)
Matrix XR 2010 (5-09-2014)

Image
ToolGuy
Posts: 3584
Joined: Wed Jul 28, 2004 3:38 am

Re: Corvette exhaust tip on my Vibe! (ArcsVibe)

Post by ToolGuy »

Quote, originally posted by ArcsVibe »So are you going to send me a spare one to "test"? Maybeeeee.....
djb383
Posts: 1571
Joined: Thu Sep 01, 2005 1:41 am
Location: The Republic of TEXAS

Re: Corvette exhaust tip on my Vibe! (MiVibe-ToolGuy)

Post by djb383 »

Hey, the Vette exhaust tip looks cool on the Vibe. I put a exhaust tip from my '70 Dodge Dart 340 on my Vibe - wish I still had that car.click
'05 Lava Tutone base, Pwr Grp, Moon & Tunes, 16" alloys, Auto.....Yep, it's gotta HEMI
ToolGuy
Posts: 3584
Joined: Wed Jul 28, 2004 3:38 am

Re: Corvette exhaust tip on my Vibe! (djb383)

Post by ToolGuy »

Yours looks good too! Speaking of old Dodges... My friend has a 1970 Dodge Polara. An old lady car and boy is it s blast from the past!
Post Reply