Installed new AEM cold air intake tonight!!

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Installed new AEM cold air intake tonight!!

Post by QUIKAG »

Actually, I watched my mechanically inclined buddy put one on in less than hour. He is a past president of a big Prelude club in the DFW area and now owns an S2000 and he is going to be the president of that club. He's a great guy. He's restoring or atleast putting an '88 Prelude back together from pieces. Anyway, before I get into my thoughts on the intake, anyone in the DFW area, he'll put the intake on your car for $50. He's going to start a speed shop on the side. He's an electrical/hardware engineer as a primary occupation. E-mail if you're interested coreywells01@Hotmail.comOkay, thoughts on the intake. WOW!!!! WOW!!!! WOW!! I actually feel some low-end torque pickup from this thing. It's unobtrusive at low rpm and light to mid throttle. You don't even know it has an intake. Cruises just as quiet as before....but give it some throttle.... WOW!! Once it hits lift, it starts this honking noise that sounds very sweet, as it winds through 7000 rpm to 8200rpm, it starts this RIPPING sound. I don't know how to describe it. It's a very, very, very sweet sound. Really a nice ripping sound, I've been in Ferrari's before and I hang around a very diverse group of guys as I own a modded C5 Vette, but this sound is very, very nice. It's a ripping howling noise, I absolutely love it!! I have a bad feeling my gas mileage is going to drop dramatically as I want to keep it floored all the time, I slowed down a few times on the freeway, just so I could rip through 2nd and 3rd gear again. Winding through 4th gear puts me in triple digits and I don't have a Valentine One radar in my Vibe, only in the Vette. I may need to get one for the Vibe. Anyway, this mod is very, very worthwhile!! I ordered from Adventon, they delivered as advertised. About $217 SHIPPED. I've had a Prelude VTEC, a '97 model and had an intake on that, it didn't sound as sweet as this.... I'm in love with my Vibe all over again, I hope my C5 doesn't get jealous.
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Installed new AEM cold air intake tonight!! (QUIKAG)

Post by BigWill »

Oh man...I know you are lovin' it. That is one of the things I am looking forward to. I can't wait. How hard was it to put in? oh yeah...Auto or Stick? and just how fast did you take it up to...LOL?
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Installed new AEM cold air intake tonight!! (QUIKAG)

Post by BigWill »

I couldn't find the right intake for our car...where at on the site did you goto? Or what kind did you get?
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
robdog
Posts: 372
Joined: Mon Dec 30, 2002 1:36 am

Re: Installed new AEM cold air intake tonight!! (BigWill)

Post by robdog »

Use the one for the Toyota Matrix, it will work, it is the same engine...
03, Abyss monotone GT, 6 disk changer, moon and tunes, Cargo mat/nets, power package, side airbags, AEM Short Ram Intake, Borla exhaust , 35% tint all around, F1 strut tower brace, debadged, 17" Excel rims w/ federal ss595 tires.
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Installed new AEM cold air intake tonight!! (BigWill)

Post by QUIKAG »

The Matrix XR intake is for the base vibe and the Matrix XRS intake works for the Vibe GT.The install isn't the easiest in the world, but keep track of stuff and follow the instructions and it won't be too bad. My buddy put it on, so it was very easy for me to watch. All's I had to do was buy him dinner!! LOL. He's cool like that, he just likes working on cars. Anyway, I have a Vibe GT which only comes with the six-speed manual. I did hit 110mph checking it out, but I seem to do that everytime I get in the Vette, so it's no big deal. I'm loving the intake, I took it easy on the way to work this morning and I didn't even know I had the intake on. Now, a few blocks from work, I got on it and heard that ripping sound again, how cool....
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
CaCathy13
Posts: 185
Joined: Tue Dec 10, 2002 12:41 am

Re: Installed new AEM cold air intake tonight!! (QUIKAG)

Post by CaCathy13 »

Congrats man!So glad to hear everything went well...I told you that you were gonna LOVE the sound! It is like warp speed...next thing you know cars around you are turning blurry as you pass...welcome to the club!Vibe GT: $21,600AEM CAI: $217Look on the face of a Ricer who you just left in the dust: PRICELESS
CathyWhen this baby hits 6.000rpm's, you're gonna see some serious sh*t-Got Lift?'03 Neptune Vibe GT: SLP Hood, AEM CAI, Thermal R&D exhaust, Unorthodox underdrive pullies, K&N filter, G-Racing 17' Mito's, TEIN Springs, yellow calipers, GrafxWerks, Silverstar's, XM, Infinity basslink-more mods to come!http://www.mitro.net/vibe
slbpsi63
Posts: 805
Joined: Fri Nov 22, 2002 3:12 am

Re: Installed new AEM cold air intake tonight!! (CaCathy13)

Post by slbpsi63 »

quote:Congrats man!So glad to hear everything went well...I told you that you were gonna LOVE the sound! It is like warp speed...next thing you know cars around you are turning blurry as you pass...welcome to the club!Vibe GT: $21,600AEM CAI: $217Look on the face of a Ricer who you just left in the dust: PRICELESS NICE!!!!
Base Vibe, Shadow Monotone, 5sp.
inkinAbyssGT
Posts: 22
Joined: Tue Jan 14, 2003 2:18 am

Re: Installed new AEM cold air intake tonight!! (slbpsi63)

Post by inkinAbyssGT »

Only two problems with the AEM intake,1)You better have eatin your Wheaties to remove the screw that holds the second VSV Sensor to the original mounting braket. ( may have been just mine but damn was it on there good!)2)When installing the air filter cone to the end of the intake pipe you will run into interferance with your fog light. So you can either push the filter realy far onto the pipe (this will cut down on your air flow) or remove 3 or so inches from the end of your intake.other than that the system rocks and sounds just as everyone has explained.
(03 Vibe GT monotone Abyss) Progress 2.2 lowering Springs, Freedom Design tie bar, AEM cold air intake. Borla Catback system, Progress Rear Sway Bar,Pioneer DEH-P8400MP cd/mp3 player. Rockford 1000w amp, dual RF PUNCH 10"'s.
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Installed new AEM cold air intake tonight!! (inkinAbyssGT)

Post by BigWill »

what about getting the injen then? Check this out...
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Installed new AEM cold air intake tonight!! (BigWill)

Post by BigWill »

My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
BigWill
Posts: 155
Joined: Tue Dec 31, 2002 5:08 am

Re: Installed new AEM cold air intake tonight!! (BigWill)

Post by BigWill »

Also, just how much more boost will I really get with an automatic? I mean, I have always driven a stick and I have never put an intake on an auto.
My Vibe... 5% Smoke Tint;Pioneer DEH 7400MP; 2 Rockerdfos. tweet; one 10" woofer Rockerdfos; (updating now to; Volfenhag ZX-7160 800 Watt 4 Channel Amp, VOLFENHAG ZX-4710 10" Aluminum Cone Woofer-800 Watts)
savedbyzero
Posts: 1066
Joined: Mon Apr 15, 2002 7:15 am

Re: Installed new AEM cold air intake tonight!! (BigWill)

Post by savedbyzero »

how long did it take to get to you from adventon? getting ready to order it and just want to make sure they're legit, you know.
THIS IS WHAT I DO...http://www.studiothisis.com
QUIKAG
Posts: 352
Joined: Wed Dec 25, 2002 6:11 am

Re: Installed new AEM cold air intake tonight!! (savedbyzero)

Post by QUIKAG »

Took a week, Adventon delivered as advertised.
'03 Vibe GT monotone silver/black interior, 17 inch wheels, 6-disc changer, power packageMods: AEM intake, TRD springs, A-spec Strut Bar'01 Corvette Coupe silver/black interior, six-speed, Z51, a few mods, 12.29 at 117.3mph in 1/4 mile on street tires.
Post Reply