On the seats man, you can always do what I did. Pull em out and spray the sides w/ black vinyl/fabric dye. Duplicolor sells it. No need to pull teh covers off, just remove the seats and tape off the middle section. Spray the rest black and you have stock looking 2 tone seats. Mine came out great So...

I have a complete 2zz gt head x/ valve springs and hook i repied to the pm before reading the post. shipping might be a bit high for my need. I have the master engine rebuild kit, but the kits dont ever come with valve parts, so i had to napa the valves, and need springs as a backup, just in case m...

Pm if you have these for sale. Rear cargo area RUBBER fitted weather mat. Manual shifter leather boot without holes. Shift knob with leather still intact. Driver side fender in "frost white" color. OEM seats other than the 2003's only option, gray color. Valve springs for a 2zzge motor. An...

So being without my car for 2 months, i finally started stripping the engine down to the cams. And upon looking into the cam area, i noticed my cylinder #4 Valve rod, was frikkin snapped off. And the spring was barely Touching the rocker. I have 137,000 miles on my car, and my valves look like new s...

the access port under the seat is where the fuel pump is, and is more than large enough to put your arm into. it does just unbolt, but its sealed by a tar like adhesive. you should be able to pull the plate off without having to cut the sealer adhesive. its pretty soft.

forgot to ask, any 2zz fuel injectors left?

the 88969488 part name is called the SDM module. GM dealers charge $350 for it, and $400 to "Program" it to your VIN. the function of this part, is to deploy the airbags if it detects a crash. If it tripped the airbag light, and you dont get it fixed, then your airbags just wont work. Ther...

im looking for the crank and cam position sensors. Do you have them?

bought my plate at toyota for $170 P/N 46503-20070 And 46504-20070 For left and right side. cant remember which part # is right or left. OEM parts that are related to the backing plates... Caliper mounting bolts #47715-01010 & 47715-01020 Parking Brake Shoe Struts #47613-32030 Parking Brake Cabl...

looking for the cam position sensor, AND the crank position sensor.
Price? if you still have it.

ebay has timkin replacement bearsing for around $30. i got both of mine for $50 total. free shipping.

an update. My wheel bearings are making noise now. sounded like it was REALLY bad on the drivers side. had it replaced. Still sounds noisy as all heck, and from the drivers side. Until i sat around in the car while someone else was driving. ITS the friggin passenger all along. i think its because of...

are you have check engine code? Yes, only comes up as "misfire in cylinder #4" even dealer said the same thing as autozone. I was pissed at dealer for charging me for info I alread know, and had gotten for free at autoxone. so they charged me for half an hour instead of an hour :roll: wel...

best to call gm/toyota parts devision, and ask directly. most dealers have no idea how to find parts you have no "official" name for, or part # reference.

had this problem in a jetta.while driving, the car would "go into neutral" then shift back into gear when revved.Or it would rev and take off like it was a cvt tranny.reverse worked perfectly but drive was slipping bad.would get a burning smell when it slipped also.the clutches in the auto...

automatics have clutches in them also, and a failsafe that wont allow the gears to enguage, unless the rpms, and speed are ready for it.HOWEVER, if you go any gear, into PARK, you cause MAJOR damage.Park, has a rod that comes down into the gears, to lock them into place. over time, if you dont use t...

no matter what gear you are in, lift adds the same amount of HP in all gears of the lift range.It feels less powerful on higher gears, because the gear ratio is making the rpm range longer to reach the redline.record the redline range of 1st and 2nd, then replay in slower motion. as if it were the s...

i have the PROPERGear ratios and speeds on my cardomain page, its in my signature.

bump

check lower A arm/lower control arm.also check the tie rods, ball joint, cv axles shafts and joints, camber bolts, steering alignment. and upper control arm.

2003 GT 6speed, My record governed on everything stock is 141mph. Was putting salt in an accord's wound.Was at 7100 rpms, in 5th gear. still had a gear and 1300 rpms, and a whole gear to go (my car redlines at 8400 rpms @ 93octane, STOCK.)

i have the exact same problem. its a misfire in the ignition.I replaced ignition coils, plugs, and all the trimmings.Only thing i didnt do yet, was diagnose the ecu.In detail....when cruising in any gear as to where the rpms are between 1000 and 2000.i release the throttle and press the clutch, it s...

I had to replace my clutch after a pressure spring snapped and knocked my fly wheel off center. I raced my 2003 GT since the day I got it, and after 70k miles, the spring broke, and around 90k, it started to slip. I only felt the unalignment at idle speeds, so I didnt think much of it.HOWEVER, GM sa...

Consumer auto parts aka CAP, was a 6pd manual cv axle assembly for a vibe GT 2003-2006 for $85i broke my axle pretty much in half.I searched everywhere. Gm wanted $800 and toyota wanted $500.the CAP axle is mostly new, except for the shaft being a re-man.So order from them, at least they have the co...