To wrap this thread up...I ordered and installed the Exedy TYK1501 clutch kit with 15/16 inch spline diameter. It feels like it fits correctly - there was no slop on the transmission shaft and the disk slides easily and smooth. I don't think this would have been the case with a 1 inch spline diamete...

To wrap this thread up...I ordered and installed the Exedy TYK1501 clutch kit with 15/16 inch spline diameter. :D . It feels like it fits correctly - there was no slop on the transmission shaft and the disk slides easily and smooth. I don't think this would have been the case with a 1 inch spline di...

For whoever is interested: I called Exedy yet again today and spoke with a tech rep (Steve) who admitted their website database has errors that haven't been fixed yet. The proper Exedy OEM clutch for a Pontiac Vibe 2003-2008 with 5 speed trans and 1.8L engine is TYK1501,even though their website say...

For whoever is interested: I called Exedy yet again today and spoke with a tech rep (Steve) who admitted their website database has errors that haven't been fixed yet. The proper Exedy OEM clutch for a Pontiac Vibe 2003-2008 with 5 speed trans and 1.8L engine is TYK1501,even though their website say...

Hi Everyone, I tried posting in the Performance/ Engine and Transmission section, but so far have not gotten any definitive answers. I have a 2008 Vibe 5 Speed manual, with 1ZZFE (2074cc) 1.8L engine and the MK5 (Pontiac)/C59(Toyota) 5 speed trans. Searching online for OEM replacement clutches, I fo...

I have an '06 and the part # is the same for Matrix or Vibe. KTY03 They seem to have changed in 2007. FYI The flywheel will most likely need to be machined or replaced. If the clutch has been slipping, a lot of heat is generated. Yeah, I'm going to get a new flywheel, thanks. Don't want to flog a d...

Try calling the GM dealer parts department. Perhaps they have the specs in their data base. Actually, now that I think about it, I believe the OEM clutch is made by Exedy. From what I can find 8 3/8; Inner Diam : 15/16; TEETH : 21T is correct. Hi Raven, Thanks for that idea. It seems like it should...

KITT, I went on Monkeywrenchracing.com, and they list the same clutch for both 1ZZ and 2ZZ (ST-1 Stock replacement) - only they don't give the specs or Exedy Model number for it so I don't know which clutch it is they are recommending... If the splines and diameters are the same, then use the heavi...

KTY03 for the 1ZZFE 5 speed. I'll be buying one in the spring. $110 shipped. http://www.ebay.com/itm/Exedy-KTY03-Clutch-Kit-/400654648842?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AVibe&hash=item5d48e0c60a&vxp=mtr KTY14 for the 2ZZGE 6 speed. Vibe GT Hi Raven, Thanks for your re...

Thanks Kitt and TheBarber for your ideas... It seems like most parts websites list the 8 3/8" diameter clutch with the 15/16" spline diameter for the Matrix 5 speed, so I guess I'll go with those specs for my Vibe. I don't know what the 8.25" with 1" spline is for, other than may...

Welcome to GenVibe! The clutch for the 03-06 may be for the Vibe GT with the 2ZZ-GE engine. Monkey Wrench Racing does nothing but the 1ZZ/2ZZ engine (mostly) and specialize in the Corolla/Matrix/MR2/Celica/Elise. Here's a link to the Exedy Stage 1 clutch they have listed for the 1ZZ engine. http://...

Hi Everyone, New member here... although I've been skimming the posts for a while looking for answers. I have a 2008 Vibe 5 Speed manual, with 1ZZFE 1.8L engine, and about 87000 miles. My clutch has been slipping for the past month, and last week, it seems like it blew up totally while exiting the H...