Page 1 of 2

JSP America Carbon Fiber M-style hood

Posted: Wed Mar 22, 2006 8:46 am
by damronjr
Here they are, pics of my hood finally installed. About the latch, on mine I just had the bend the hook toward the engine a little and it shut fine. The finish isn't great and the haziness looks to be under the clear-coat which kind of sucks. Almost no blemishes in the actual carbon weave. On to the pics!Enjoy!!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 9:02 am
by Mrizzle05
That last pic is freggin sweet!!!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 9:08 am
by millster
Nice! Looks really good!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 9:15 am
by POLO
Excellent The 6th picture,the hood look like the batman's cap

Re: JSP America Carbon Fiber M-style hood (POLO)

Posted: Wed Mar 22, 2006 9:31 am
by BlueCrush
Looks Great, Jason!

Re: JSP America Carbon Fiber M-style hood (POLO)

Posted: Wed Mar 22, 2006 9:40 am
by Smokin' Rubber
Jason can we get a profile shot of the hood?

Re: JSP America Carbon Fiber M-style hood (Smokin' Rubber)

Posted: Wed Mar 22, 2006 9:58 am
by damronjr
Quote, originally posted by Smokin’ Rubber »Jason can we get a profile shot of the hood?Will do!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 10:05 am
by Mrizzle05
Quote, originally posted by damronjr »Will do!Well!!! Where is it... we want fast responses here. the pics should already be uploaded! man... im so tempted to get that instead of the exhaust!!!That just looks good. nice buy jason!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 10:07 am
by scherry2
excellent!!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Wed Mar 22, 2006 11:46 am
by Toasted7
Wow... now that is sweet!

Posted: Wed Mar 22, 2006 2:22 pm
by northvibe
wow nice hood!

Re: (northvibe)

Posted: Wed Mar 22, 2006 4:18 pm
by Psychobroker
Wow, that looks awesome! Now just get yourself a 3-peice set of Mr. Grille's in black That would look tight imho.

Re: (Psychobroker)

Posted: Wed Mar 22, 2006 9:42 pm
by damronjr
Quote, originally posted by Psychobroker »Wow, that looks awesome! Now just get yourself a 3-peice set of Mr. Grille's in black That would look tight imho.All in the plans, Christian, that is if I decide not to use the body kit. I think it looks better with this front end, so the kit might not happen. Still haven't decided.

Re: (damronjr)

Posted: Thu Mar 23, 2006 12:33 am
by ArcsVibe
Holy #&$&$ Jason it looks unfrigginbelievable!!! Wow!!! SWWWEEETTT!

Re: (ArcsVibe)

Posted: Thu Mar 23, 2006 12:42 am
by miked
Nice looking car. Look killer.

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 12:42 am
by Merzbow
beautiful!!!I'm likin that old green truck in the 6th picture too.

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Thu Mar 23, 2006 12:49 am
by BlueCrush
The more I look at it, the more I like that hood on your silver Vibe. It looks awesome in that 6th pic. That should be in your new sig along with "FrankenVibe" written on there. Ha, Ha.

Re: JSP America Carbon Fiber M-style hood (BlueCrush)

Posted: Thu Mar 23, 2006 12:52 am
by damronjr
Quote, originally posted by BlueCrush »The more I look at it, the more I like that hood on your silver Vibe. It looks awesome in that 6th pic. That should be in your new sig along with "FrankenVibe" written on there. Ha, Ha.Gonna have to work on that and getting a FrankenVibe decal from Ryan!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 1:29 am
by ballrub
Jason...the hood looks sweet on your car! It's starting to look better and better every mod you make! Plus...I love those wheels (hehe!)!!!

Re: JSP America Carbon Fiber M-style hood (ballrub)

Posted: Thu Mar 23, 2006 1:30 am
by damronjr
Quote, originally posted by ballrub »Jason...the hood looks sweet on your car! It's starting to look better and better every mod you make! Plus...I love those wheels (hehe!)!!! Thanks, can I have the ones you have now too?!?

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 1:36 am
by ballrub
Quote, originally posted by damronjr »Thanks, can I have the ones you have now too?!? No!!! I'm keeping these!By the way...you'll have to make a new "sig" picture now, won't you?!?!

Re: JSP America Carbon Fiber M-style hood (ballrub)

Posted: Thu Mar 23, 2006 1:46 am
by damronjr
Quote, originally posted by ballrub »No!!! I'm keeping these!Ah man! Quote, originally posted by ballrub »By the way...you'll have to make a new "sig" picture now, won't you?!?! Probably try to do that before next week!

Re: (damronjr)

Posted: Thu Mar 23, 2006 1:57 am
by Psychobroker
Quote, originally posted by damronjr »All in the plans, Christian, that is if I decide not to use the body kit. I think it looks better with this front end, so the kit might not happen. Still haven't decided.I agree, looks better with the stock front end, and you have more bumper clearance.

Re: (Psychobroker)

Posted: Thu Mar 23, 2006 2:00 am
by damronjr
Quote, originally posted by Psychobroker »I agree, looks better with the stock front end, and you have more bumper clearance.Don't really have to worry about clearance when I can make it whatever I want with bags! I do think it looks better with the 03/04 grill design though.

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 2:09 am
by drunkenmaxx
Quote, originally posted by damronjr »Gonna have to work on that and getting a FrankenVibe decal from Ryan! give my some ideas of what you want and i could make you up something to e-mail him. (i did this this when ragingfish wanted HID decals)i got nothing better to do!shoot me an e-mail: rbergfield@printavenue.com

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 2:19 am
by theangrydwarf1
The new hood looks great!!!! I may have to see if they still have any, would make a nice addition to my ride. Thanks for the pics.

Re: JSP America Carbon Fiber M-style hood (drunkenvibe)

Posted: Thu Mar 23, 2006 2:33 am
by Smokin' Rubber
If I have time to pick my hood up today I'll post pics too

Re: JSP America Carbon Fiber M-style hood (Smokin' Rubber)

Posted: Thu Mar 23, 2006 1:15 pm
by Merzbow
WOOOOO I got mine today. Look ssooooooo nice. perfect condition. I can't wait to get it on tomorow night. I'm about to call in sick at work tomorow to put it on!!!

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Thu Mar 23, 2006 1:29 pm
by damronjr
Quote, originally posted by Merzbow »WOOOOO I got mine today. Look ssooooooo nice. perfect condition. I can't wait to get it on tomorow night. I'm about to call in sick at work tomorow to put it on!!!Pics buddy! Is mine the only one that was hazy? Wouldn't be surprised!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Thu Mar 23, 2006 2:39 pm
by Merzbow
Mine looks a little hazy in one or two spots near the inlet of the scoop but once it warms out I bet it will come right off with some wax and all that jazz...I can't wait to detail my baby...I HATE winter...Your car looks soooo cute in the warmth and the sun with her new accessory. I think It will have to get past 45 degrees for me to fully enjoy this hood but I ges I'll have to wait

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Fri Mar 24, 2006 8:26 am
by damronjr
Wanted to post this here as well:I guess I got the short end of the stick again! Mine is all hazy and looks dusty, but the dust appears to be under the clearcoat and doesn't wipe off. I don't see that in your pics, but they are kind of far and in indoor light. I need to wash and wax it and see if it clears up. You could probably see what I was talking about in the pics I posted.Don't worry, I'm not too happy right now either. Maybe we should have listened to Havock! Here are the pics of my hood now, and this is not external, but rather looks to be under the clearcoat! I called and emailed Linda already.

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Fri Mar 24, 2006 9:29 am
by Smokin' Rubber
Picked up my hood though I probably won't put it on until June It does appear you got the short end of the stick again Jason, from what I could tell my clear coat looked almost perfectly clear (though I could be mistaken because I was looking at it in my dark room).

Re: JSP America Carbon Fiber M-style hood (Smokin' Rubber)

Posted: Fri Mar 24, 2006 10:15 am
by damronjr
Quote, originally posted by Smokin’ Rubber »It does appear you got the short end of the stick again Jason, from what I could tell my clear coat looked almost perfectly clear (though I could be mistaken because I was looking at it in my dark room).Wouldn't surprise me, though mine looked decent until a couple of days in the elements.

Posted: Fri Mar 24, 2006 10:21 am
by P-Fernandez
such a nice hood !!!!! looks real nice on the your platinum/satellite vibe

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Fri Mar 24, 2006 2:49 pm
by Merzbow
Yeah dude Mine looked fine as well...you better get in touch with her that is pretty hazy I though tI had horrible luck with cars but I think you may havea bit worse of luck than I....It still looks friggin awesome though! Don't worry, one day the car gods will reward you for your patience and give you some an amazing stroke of luck.

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Sat Mar 25, 2006 2:56 pm
by Lancer
Here it is on a satelite 2 tone. Click the link for another.

Attached files

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Sat Mar 25, 2006 2:59 pm
by Lancer
Here's a side view everyones been wanting.

Attached files

Re: JSP America Carbon Fiber M-style hood (Lancer)

Posted: Sat Mar 25, 2006 3:05 pm
by damronjr
Man, that's awesome! No bad luck for you either huh? Guess I just got the shaft again!

Re: JSP America Carbon Fiber M-style hood (Lancer)

Posted: Sat Mar 25, 2006 3:21 pm
by POLO
Hey in two-tone match very well

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Sat Mar 25, 2006 3:46 pm
by Lancer
Oh, I got a little shafted too. The front egde of the hood is only partially rolled. I have a big 3" flat spot and a couple 1" spots. You don't see it when the hood is down, but for showing with it up you can see it plain as day. Oh and the sides have larger gaps then the stock hood does.I also had a hard time getting the hood to close right. I have to slam it for it to latch. And I had to take the dremel tool to the hood stand hole so it would would fit.For a brand name that is all over mags, show cars, toys, and video games, this is really (removed) poor craftmanship! Here's a shot from the inside.

Attached files

Re: JSP America Carbon Fiber M-style hood (Lancer)

Posted: Sun Mar 26, 2006 11:25 am
by damronjr
Well, I guess I can say I didn't have any of those problems, but gee, which is worse???

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Sun Mar 26, 2006 2:09 pm
by Merzbow
Maybe if they made them in a country that actually produces cars it wouldn't be that bad?

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Sun Mar 26, 2006 10:26 pm
by Chef_K
I wonder how sick that hood would look on my monotone Abyss? Inform me as to how you found this fantastic mod please.Kurt

Re: JSP America Carbon Fiber M-style hood (Chef_K)

Posted: Mon Mar 27, 2006 2:36 am
by damronjr
Well, someone isn't fessing up! I just got off the phone with Linda and she said someone another person went back on theirs with I believe the same problem. She said she sent the pics to the manufacturers HQ to try to figure out what the deal is. She told me to just leave it on for now and she will get back to me as soon as she gets word back from them. I just hope the others Like Pauls and Lancers don't start going bad, b/c apparently it gets worse with time. mine right now is very white all over the hood now. It looks like complete @$$!

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Mon Mar 27, 2006 3:36 am
by Merzbow
hmmm...not good. Mines been through about 200+ miles within the last two days and it's also been through snow and rain and wind during that time so I think that covers almost all bad things here in Michigan. So has she heard anything from the headquarters or no?

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Mon Mar 27, 2006 3:40 am
by damronjr
Quote, originally posted by Merzbow »hmmm...not good. Mines been through about 200+ miles within the last two days and it's also been through snow and rain and wind during that time so I think that covers almost all bad things here in Michigan. So has she heard anything from the headquarters or no?Don't know, that was just this morning that I talked to her. Oh, and it's not the other elements, it's the sun! She said maybe they forgot to put UV block or whatever on it when they made it.

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Mon Mar 27, 2006 6:00 am
by Psychobroker
Quote, originally posted by damronjr »Don't know, that was just this morning that I talked to her. Oh, and it's not the other elements, it's the sun! She said maybe they forgot to put UV block or whatever on it when they made it.What morons.

Re: JSP America Carbon Fiber M-style hood (Psychobroker)

Posted: Mon Mar 27, 2006 6:28 am
by mac99d
Hope they get this figured out before to long.

Re: JSP America Carbon Fiber M-style hood (damronjr)

Posted: Tue Mar 28, 2006 6:12 am
by Merzbow
(removed)....didn't think about the sun! If it does fade frmo the sun I'll March on New York with you dude.

Re: JSP America Carbon Fiber M-style hood (Merzbow)

Posted: Sun Apr 02, 2006 4:39 am
by Smokin' Rubber
Lol I guess its a good thing my hood is sitting in my poorly lit room still semi wrapped in the foam stuff until summer, I should have them pay for shipping it back so they can put the UV crap on before the hood starts to look like **** if possible. Btw I don't think we have "rolled" edges, they were cut and then just rounded I think