Next meet

POLO · Post by **POLO** » Thu Mar 16, 2006 10:59 am

Wait,maybe my foglight,i didn't put yet my luminix.And,maybe a new horn too.

xrs06 · Post by **xrs06** » Thu Mar 16, 2006 7:21 pm

Your foglight??? Not sure we'll have the time for that

miked · Post by **miked** » Thu Mar 16, 2006 8:35 pm

MOUHAHAHAHAAH that is so long to install.I finally received my springs yesterday and I'll probably go get my CAI today.Where can I rent a spring compressor on a sunday?

ArcsVibe · Post by **ArcsVibe** » Thu Mar 16, 2006 8:38 pm

Canadian Tire....that is where I rented mine. Not the greatest but it does the job

POLO · Post by **POLO** » Thu Mar 16, 2006 8:41 pm

So Sam,any news for the garage?

Thewhite · Post by **Thewhite** » Thu Mar 16, 2006 9:29 pm

Quote, originally posted by miked Â»Thats wright Ben,I think we should hook up at 12h00 istead of 2 pm to do everything.agree!!! anyone can't at noon?

POLO · Post by **POLO** » Thu Mar 16, 2006 9:35 pm

Quote, originally posted by Thewhite Â»agree!!! anyone can't at noon?I will do my best

miked · Post by **miked** » Thu Mar 16, 2006 9:55 pm

I'll be there, I'll be there....with a little melody in the background.mouhahahha

ArcsVibe · Post by **ArcsVibe** » Thu Mar 16, 2006 11:55 pm

Hi guys! Well I spoke to my buddy and he says no problem but he would like to leave at 6PM if it is possible. So noon to 6 is that ok? We can bring pizza and beer.He is located at the "Promenades Fleury" which is on Fleury and Papineau. I will try to get an address so that I can get driving directions for everyone.Is that ok?

miked · Post by **miked** » Fri Mar 17, 2006 12:01 am

No problem for me, It's just fine

xrs06 · Post by **xrs06** » Fri Mar 17, 2006 12:13 am

Just a little detail: Is it a single place garage or can we put more at the same time??? If we can work on 2 cars at the same time, the afternoon should be plenty. If one at a time and we include pizza, it might be tight...

miked · Post by **miked** » Fri Mar 17, 2006 12:49 am

By the way Ben, are you bringning your tools... and I'll bring you some beer. Which one do you prefer...

xrs06 · Post by **xrs06** » Fri Mar 17, 2006 12:58 am

Find the spring compressor, bring the beer and I'll take care of the tools

Thewhite · Post by **Thewhite** » Fri Mar 17, 2006 5:03 am

Quote, originally posted by ArcsVibe Â»Hi guys! Well I spoke to my buddy and he says no problem but he would like to leave at 6PM if it is possible. So noon to 6 is that ok? We can bring pizza and beer.He is located at the "Promenades Fleury" which is on Fleury and Papineau. I will try to get an address so that I can get driving directions for everyone.Is that ok?super!!!

ArcsVibe · Post by **ArcsVibe** » Fri Mar 17, 2006 9:22 am

Quote, originally posted by xrs06 Â»Just a little detail: Is it a single place garage or can we put more at the same time??? If we can work on 2 cars at the same time, the afternoon should be plenty. If one at a time and we include pizza, it might be tight...Salut Benoit! Yes in fact one car can fit there since there is some maintenance equipment in the garage. We can still do the small jobs outside near the garage though, no?

Thewhite · Post by **Thewhite** » Fri Mar 17, 2006 10:51 am

ya, like mine

xrs06 · Post by **xrs06** » Fri Mar 17, 2006 10:25 pm

Never obvious to remove a front bumper to install a CAI when bolts and clips holding it are "hiding" under 3 inches of ice and slush...Also depending of the weather, working in the "minus's" outside doesn't help things either. If it's +10C we'll be fine Finally we have to take into consideration that replacing 4 springs in those conditions will take a few hours (maybe 3...)Do we have access to a hose? If yes, we could clean (hose down) excess crap from bumper (etc) before working on the cars...

ArcsVibe · Post by **ArcsVibe** » Sat Mar 18, 2006 12:07 pm

Greetings from Denver Yes the garage does have a hose, that is where I usually wash my car and shoot the breeze with my buddies....Let me know if you still want to use the garage, and yes I do hope it gets warmer next weekend lol!

xrs06 · Post by **xrs06** » Sat Mar 18, 2006 7:40 pm

For me it's fine.It's a go

Thewhite · Post by **Thewhite** » Sun Mar 19, 2006 5:05 am

I know it will change, but here's something to make your mind!!

miked · Post by **miked** » Sun Mar 19, 2006 8:47 pm

All is fine for me. If we don't have the time for the springs, there's no problem, I can still wait to install them. Otherwise I'll have the beer and my car.But probably no new antenna...

Thewhite · Post by **Thewhite** » Sun Mar 19, 2006 9:03 pm

ya, but you'll have at least your CAI to install?

miked · Post by **miked** » Sun Mar 19, 2006 9:12 pm

For sure. Will need to check for the springs. Didnt knew it would take 3 hours just for the springs.

Thewhite · Post by **Thewhite** » Mon Mar 20, 2006 9:01 am

at least, it took 3h30 hours for the professionnals at the garage to change mine...

Sub-Vibe-R · Post by **Sub-Vibe-R** » Tue Mar 21, 2006 7:29 am

I'll try to be there....As I can see, people are looking for intalling springs, CAI and speakers... I made all this on my Vibe, so I can bring some expertise.BTW, do we have an air compressor and air tools avalable at the garage??? Otherwise I can bring mine.

ArcsVibe · Post by **ArcsVibe** » Tue Mar 21, 2006 8:55 am

Great! It would fantastic to see you again! We would need your expertise in the springs install I am coming home tomorrow and will post directions to the garage in a day or so

xrs06 · Post by **xrs06** » Wed Mar 22, 2006 3:03 am

Indeed it would be nice to have somebody else that knows for the springs. Not that it's difficult, it's more time consuming...As for air tools, they would be appreciated for sure

miked · Post by **miked** » Wed Mar 22, 2006 3:16 am

Thanks Ben for stating that all remainning people are dumb-(removed).No it's a joke, I'll bring my camping chair, sit in it with a cold one and wathch you sweet and get your hand durty. And when the time come, serve you a cold one. At the end of your job ( no drinking at work).LOLAs for the air tools, if you can not come Sub-vibe-r, I probably could try to get some.

xrs06 · Post by **xrs06** » Wed Mar 22, 2006 3:33 am

Wasn't implying anything It's just that there is a difference between telling somebody how to do it and letting somebody do it.

Thewhite · Post by **Thewhite** » Wed Mar 22, 2006 4:07 am

Quote, originally posted by xrs06 Â»It's just that there is a difference between telling somebody how to do it and letting somebody do it.Ben, we don't need to know how you deal with your gf in bed!sorry, you opened the door wide open, it was too easy...

xrs06 · Post by **xrs06** » Wed Mar 22, 2006 4:45 am

In fact, I do tell her how I like it then I let her do it You should try that

xrs06 · Post by **xrs06** » Thu Mar 23, 2006 9:02 am

Sam, any news about air tools? Exact location? Everybody coming?

ArcsVibe · Post by **ArcsVibe** » Thu Mar 23, 2006 12:06 pm

Quote, originally posted by xrs06 Â»Sam, any news about air tools? Exact location? Everybody coming?Ok guys sorry for the delay, back from my business trip As for the air tools I told miked he can either rent them at Canadian Tire or Sub Vibe R can bring his...I myself do not have any.Here is a map of Les Promenades Fleury. I will IM all of you my cell number in case you need more directions. Les Promenades start from Papineau corner Fleury. It is a strip mall with a Pharmaprix, Superclub Videotron, SAQ , a Metro etc. My buddy is the janitor and has a large garage in the back of this shopping center.Here is a map of the area:http://mq-mapgend.websys.aol.c...26%40Would it be easier if we all meet somewhere on the way? We can all drive down together? For the guys in the east end like Paul or Mike I can tell you exactly how to get there. For the rest of you I can meet you at the Julep....let me know!

miked · Post by **miked** » Thu Mar 23, 2006 8:54 pm

I'll be there at noon and I will have the springs, CAI and spring compressor.If there's a problem I will IM Sam with my cell # cause I wont have access to internet after noon today.

Thewhite · Post by **Thewhite** » Thu Mar 23, 2006 9:00 pm

I'll be in CÃƒÂ´tes des Neiges, so we can meet at the Julep without prob. 12:30?

Sub-Vibe-R · Post by **Sub-Vibe-R** » Thu Mar 23, 2006 10:01 pm

I'm doing my best to be there... If I'm coming (and I'm working hard to be there) I'll bring my compressor and air tool as well as ratchet set, the 22mm socket needed to remove the front strut and the most important, the loose nut.

xrs06 · Post by **xrs06** » Thu Mar 23, 2006 11:30 pm

I tought we were going to meet at 12h at the garage??? If we "pre meet" at the julep, shouldn't it be ealier???

miked · Post by **miked** » Fri Mar 24, 2006 12:24 am

For My part I'll be at the garage.

ArcsVibe · Post by **ArcsVibe** » Fri Mar 24, 2006 12:57 am

Quote, originally posted by Thewhite Â»I'll be in CÃƒÂƒÃ‚Â´tes des Neiges, so we can meet at the Julep without prob. 12:30?Can you be there at 11:30AM? If not its ok. I can come back and get you

xrs06 · Post by **xrs06** » Fri Mar 24, 2006 1:23 am

Quote, originally posted by miked Â»I'll be there at noon and I will have the springs, CAI and spring compressor.I think you're forgetting something:My beer and your lawn chair J/K

ArcsVibe · Post by **ArcsVibe** » Fri Mar 24, 2006 1:34 am

N.B You guys all have my cell phone number. I will meet everyone at 11:30AM at the Julep-please try not to be late. If you are late or can be at the Julep later please no worries just call me and I will drive there to meet you.So who will be at the Julep? Who is going to be going straight to the garage? Please confirm location

xrs06 · Post by **xrs06** » Fri Mar 24, 2006 1:35 am

Garage at 12h or earlier

xrs06 · Post by **xrs06** » Fri Mar 24, 2006 2:51 am

Anybody could bring 2 "jack stand" (chandelles)???

Thewhite · Post by **Thewhite** » Fri Mar 24, 2006 3:46 am

I'll be at the Julep at 11:30. I have no Jack stand, sorry

ArcsVibe · Post by **ArcsVibe** » Fri Mar 24, 2006 8:05 am

Great! Those that have any questions please call me on my cell. If you get to the garage before noon please hold on till I get there. I will have my buddy waiting and will put up a sign next to the garbage compactor.The garage is located behind the shopping center, just look for all the rides

psycho · Post by **psycho** » Sat Mar 25, 2006 4:06 am

Quote, originally posted by ArcsVibe Â»Great! Those that have any questions please call me on my cell. If you get to the garage before noon please hold on till I get there. I will have my buddy waiting and will put up a sign next to the garbage compactor.The garage is located behind the shopping center, just look for all the rides i'll meet you guys directly at the garage...btw, just received my ES motor mounts yesterday:) Is this meet for the spring install only?

Thewhite · Post by **Thewhite** » Sat Mar 25, 2006 4:37 am

I just took a close look to the install instructions for my horn... I think I'm gonna have to forget it. You'll see tomorrow, but I think I won't be able to install it properly. I didn't buy all electric wires I need for it, because I what to make sur eI can do it first.

xrs06 · Post by **xrs06** » Sat Mar 25, 2006 5:23 am

No, not just spring.It's an "all you can install in 6 hours" deal!!(Was answering psycho's comment, not replying to thewhite...)

Sub-Vibe-R · Post by **Sub-Vibe-R** » Sat Mar 25, 2006 6:48 am

I'll be there.I'bring compressor, air tool, floor jack and all tool needed for the springs....BTW, I don't have stands, so if anyonem has, it will help.I will go directly to the garage. I will drop my gf in Anjou, so going to the Juled will make me drive longer for nothing.

fredfreedom · Post by **fredfreedom** » Sat Mar 25, 2006 9:07 am

I'll go directly to the garage because I live in Ahuntsic not so far of the Promenades Fleury.