stereo installation question

Stereo, security systems, vehicle electronics, and electrical-related discussions
Post Reply
Posts: 67
Joined: Mon May 30, 2011 12:46 am
Location: Bowmanville, ON Canada

stereo installation question

Post by jeff_j1701 »

Hey all!

I have an '07 Vibe and I had the factory radio replaced about 10 yrs go with a new radio.

The radio is a single DIN.

This radio is now pretty much dead and I want to replace it.

My question...

Do I need a new wiring harness or can I use the wiring harness that was used the 1st time I replaced the radio? I'm sticking with a single DIN.

'07 Vibe, over 300 000km
Posts: 497
Joined: Tue Oct 03, 2017 6:38 pm
Location: Golden, CO

Re: stereo installation question

Post by andrewclaus »

Most probably not, unless it's the same brand and maybe same model replacement radio. Even then, features can change over a decade.

When I replaced my Vibe radio, I bought it from Crutchfield, and got a plug adapter that made connection easy. It was money well spent. I used to use a pigtail and splice into the car wiring, wire by wire.
Post Reply