What is the part number for these clips? They are little white nylon pieces, but they break super easy. The high curbs in So-Cal kill me. My side panels have pulled off like 5 times.

My next project is to run the RCA cables under the factory carpet and into the center console, maybe through the plug that used to be a 12v outlet. Stay tuned.

Take time to test everythingBefore you put your whole dash back together, make sure everything is working and sounds good. If so, you will see an extra light next to the CD light when you turn your radio on. This is the disc changer light, in your case, the AUX-BOX. Try it out, crank up some jams, b...

Placing Aux-Box So now we need to get ready to put the Aux-Box in the dash. I used a piece of duct tape folded over to reach down and feed the RCA cable through. You will notice I have a long RCA cable, this can be picked up vitually anywhere. Feed the cable in the point shown here: You can look at ...

Wiring power and ground to the AUX-BOX This part isn't too too hard. You need to know which wires to tap into, which you can find in a previous post in this thread (about three up or so)So you will want to pull on the wire you are going to splice, pull it as if you are trying to feed more wire out o...

So, as you can tell pulling that wire from the harness delayed my install like 2 full week. 2 full weeks of no music or AC **shutters** But on the happy side, my aux-box is in and working, great might I add!

This concludes day 1, as I am waiting for my T-harness to arrive, I screwed up on the ground wire, and although I kind of fixed it, I dont want to risk shorting out my stereo by not correctly attatching the ground, so I will wait.... Please respond with things that aren't explained well in the mean ...

Wiring the AUX-BOX Power and grounding6. Now we are ready to attach our Aux-Box. The box is very easy to attach to the stereo, but we should attach grounding and power first.The yellow wire is going to go to our 12v sourceBlack will go to a ground source7. The wiring is different from vehicle to veh...

Removing the Stereothis can also be found in detail at:http://www.metraonline.com/dow...5.pdf2. Use a hex driver to undo the four bolts shown here. I used a size 7/16” with duct tape on the inside, since I didn’t have metric on hand. This also made sure that the screw didn’t fall into the dash...

---||| Taking out the factory stereo |||---1.Remove the faceplate under the stereo. This is actually very easy. Place your two index finger under the bottom of the plate, and pull out gently. The bottom should pop right out. Then grab the sides and gently wiggle the plate off.check out the video her...

So this is going to be my little guide to installing an AUX-BOX in a 2005 Pontiac Vibe with the Moons and Tunes package.This seems lengthy, but will save you lots of time if you read along and follow the steps, make sure you read, not just look at the pictures, if you want to understand it all Befor...